Question about 1990 Toyota Corolla

1 Answer

Removing the dash board

I need to remove the dash board to get the radio. Haw can I do that?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hello, on most corolla's I have done,the black plastic shroud unscews from around the speedo/dash cluster and also includes the hazard/breakdown switch.The black plastic then comes out with stereo attached(usually)so be careful not the crack the plastic surround.In most cases you will not need to remove steering wheel but it will give more room to work with,if it is removed.Hope that helps.

Posted on Jul 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine light came on wont go off dash board. 2003 saturn ion


you need obd2 scanner to do this or obd interface for PC. on some cars you can try to remove negative battery cable for 15 minutes. if you have radio code you need to save it before removing cable.

Nov 16, 2011 | 2003 Saturn ION

1 Answer

How do you remove the stereo out of a 2008 nissan xterra?


Start by removing the whole dash board...you'll have a better access to the radio from there. Continue removing the bolts/nuts from the bracket it's connected to...follow all wire connections, and retrace all steps your making. If you trace your steps you won't have a problem. Relatively simple procedure. 20-30 min job

Apr 23, 2011 | 2008 Nissan Xterra

1 Answer

How do i remove the radio


Removing the radio is quite an undertaking. I had the exact unit and you had to remove the dash to get to the radio. It takes an expert mechanic about four to six hours to remove the dash install the radio and replace the dash. Good Luck!!!

Sep 24, 2010 | 1998 Oldsmobile Eighty Eight

1 Answer

How to install a radio in a 1999 GTI


If it's a OEM unit you'll need a radio key tool similar to this
3b0dfb6.jpg
so you can pull the old unit out and replace it with another OEM unit.
Before removing any power connection (batt, couplings and connectors) from your vehicle, you must have your radio code in case you need to unlock it from safe mode.

Replacing it with an aftermarket unit calls for a different procedure. This will involve in removing most of the panels from the dashboard. You will need a torx bit to remove the screws from the dash. It will also involve in removing the shifter console cover out of the way so the radio carrier would be accessible from below.
Remove the 2 side covers fro m the dash (fuse cover), a couple of screws for the drivers kick panel will be visible.
Remove the headlight switch assembly by pushing the rotary switch in and turned to the left, This will release the lock and you can pull the assembly out to un-hook the connection from behind.
Remove the driver side kick panel, the glove box with the light connection behind it and the two side panels from the radio carrier.
You can access the screws holding the carrier from the dash and you can mount your new unit into the carrier using the new hardware from you new head unit. You can buy the adapter from Fry's Electronics specific for your radio to connect your unit with the original radio harness,

Apr 29, 2010 | 1999 Volkswagen GTI

2 Answers

How do I remove the fan switch to replace it on the dash under the radio?


Have your radio code before you pull it out with the right radio tool. This pull would involve removing this parts.
  1. Glove compartment
  2. Driver side panel
  3. Center top dash board
  4. Defrost switch carrier
  5. Radio unit
  6. Center lower half of dash
So I'd suggest go to your local public library and look for your car manual. It would be either Chiltons or Clymers manual, it's not as precise a Bentley VW Official factory repair manual. Yes it really involves taking all those parts out just to get to the rotary switch.

Apr 20, 2010 | 2000 Volkswagen Beetle

1 Answer

Need to remove cd/eadio 5065 from dash 2003 Getz -


two pìn hoñes either side of the front of the radio ,push a special tool into these holes to remove the radio

Mar 04, 2010 | 2003 Hyundai Accent

2 Answers

I need to remove the dash of my 87 accord but i dont know how does anyone out there have a diagram or something that can help me


First what do you need to remove it?

Dash removal can be very tough and time consuming.


Let us know what job you are trying to complete by removing the dash, and we can better advise you

Oct 09, 2009 | Honda Accord Cars & Trucks

1 Answer

How to remove the radio?


Remove screws from dash trim. Remove dash trim. Next remove screws from radio. Pull out radio then disconnect wires.

Jul 10, 2009 | 1994 Dodge Grand Caravan

1 Answer

Removing/replacing a 2000 kia sportage 4x4 4 dr heater core


The heater is located under the dash board to the right and down from the radio. To remove and replace it you will have to remove the dash board down to the fire wall. Also, you will have to disconnect two hoses that connect up to it from the engine compartment. These are located in the back of the engine and down on the firewall about midway. Once you remove the dash board and locate the heater core you will be able to see the location of these two hoses. Removing the heater core is time consuming but it will save you about 700 dollars.

Oct 23, 2008 | 1999 Kia Sportage

Not finding what you are looking for?
1990 Toyota Corolla Logo

Related Topics:

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...