Question about 2005 Chrysler Town & Country

1 Answer

2005 Chrysler town & country

The check engine light is on and when your driving if you hit the gas pedal alittle hard it feels like your driving a stick as its bucking and sucking up some gasand when the air conditioner is on the van has no power to move and it goes to stall my husband took it to his friend and he hooked it up to a computer and it read a crank shaft sensor was bad so we changed it and the same thing has been happening but the code reads either 0014 or 0016 could you help me I would like to solve this problem quick cause I'm afraid to travel anywhere.

Posted by on

  • country05 Jul 08, 2008

    I am having the same problem!! I changed both sensors and had the cpu flashed. The light went off and the bucking at 3500rpm quit but the stalling with the air conditioning on is still hapening! I have to turn the car off and back on to get any exceleration which makes me think it is still a cpu issue.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 113 Answers

Make sure u dont have a vacume leak it will mimic lots of electrical sensor failures

Posted on Jun 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A symbol that is the malfunction indicator light went on. What is the problem?


Laura, A few places like autozone will scan why the light is on for no charge. Engine light can come on for something as simple as a loose gas cap to something worse as a faulty catalytic converter. Take vehicle into a good shop, have scanned for trouble codes, diagnosed and an estimate for repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Engine Light Is On 2005 2007 Chrysler Town and Country What to Do 2006...
what is wrong with my car
check engine light on now 2005 Chrysler Town Country

Aug 04, 2016 | 2005 Chrysler Town & Country

1 Answer

It will start but almost immediately sputters and dies. Can not keep it running. Gas pedal is hard to push down when trying to rev the engine a bit in park.


Sounds like it's time to replace fuel filter, or possibly a bad fuel pump. I'm uncertain why the gas pedal would be hard to push as it most likely isn't a cabled type on that new of a vehicle, but you can check by looking at the top of the pedal itself to see if there is a cable and if it's possibly frayed.

Apr 15, 2015 | 2005 Chrysler Town & Country

1 Answer

I have a 1996 Chrysler 3.8. town and country mini van


The oil pressure light probably came on when the engine stopped.
You would have lost your power accessories then too.
Someone will need to figure out if you have lost fuel to the injectors and/or spark to the plugs to know where to look for the problem.

Jul 23, 2012 | 1996 Chrysler Town & Country

1 Answer

Been having problem with brakes. I brake pad feels


Bleeding isnt going to help a hard pedal. If the pedal is mushy, and there is no air, the Master cylinder could be bad. If the pedal is HARD, there is no air. Press on the brake pedal several times with the engine off (5-6 times) now hold your foot on the pedal and start the engine, you should feel the pedal slightly give way under your foot. If you dont, and have a HARD pedal, the brake booster could be bad, but have professionals check it out before spending any money.

May 13, 2010 | 1993 Chrysler Town & Country

2 Answers

Check engine light comes on. odb2 code P2096 What does it mean


WHAT EXACTLY MEANS THE CODE P2096 AND HOW I SHOULD FIX IT CRYSLER 300 2010

Apr 24, 2010 | 2005 Chrysler Town & Country

1 Answer

Why does my 2005 chrysler town and country "hesitate" when I first hit the gas pedal?


Have you ever done a fuel injection cleaning, other than a bottle in the gas tank? There is a butterfly in the intake that gets gummed up. Take the intake hose off, get a can of fuel injection cleaner, (Not Carb Cleaner) and spray it all down, soak it good and use a clean rag. Have some one push the peddle down to open the butterfly, and clean it out real good, use plenty of cleaner, put it all back together and run it for a few minutes. See if that helps.

Nov 05, 2009 | 2005 Chrysler Town & Country

1 Answer

Check engine light came on and the error code is 040.4 what is it and can i drive it?


this is an egr valve trouble code..you need a new egr valve..make sure you disconnect battery when you replace it..sometimes fault will come back even though replaced valve

May 09, 2009 | 2005 Chrysler Town & Country

1 Answer

2005 Chrysler town & country touring won't turn over.


Sounds like you need a starter, or you have a loose wire somewhere under the hood.

Apr 25, 2009 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...