Question about 1989 Jeep Comanche

1 Answer

Schematic diagram Jeep 1989

Hello, Can annyone help me with a schematic diagram of the Jeep comanche 1989 electrical harnass?

regards,

jansurf@hotmail.com

Posted by on

  • tilleyron Jun 26, 2008

    need to find a wireing scematic of engine for 1989 comanche 2 wheel drive with a six cylinder engine. have looked on internet and books.

  • Anonymous Mar 15, 2014

    Can my electric pump in my old Jeep Comanche be working properly sometimes, then just suddenly cut out and cause the motor to stall out and/or stop working at intermittant times?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 115 Answers

This link should provide all the diagrams you need http://www.google.com/search?q=1989+jeep+comanche+wiring+diagram&sourceid=navclient-ff&ie=UTF-8&rlz=1B3GGGL_enUS249US254.

Posted on Nov 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 comanche 4.0 vacuum line disconnected near passenger headlight - no cruise control


You should have a vacuum line diagram under the hood of your car you can buy the haynes repair book for your vehicle at any autozone or advance auto someplace like that

Mar 26, 2013 | 1989 Jeep Comanche

1 Answer

Turn signals do not work


This is one FLASHER fault; ?m referring to the blinker "flasher fuse", it is the bottom round fuse under the dash in the fuse block.

REPLACEMENTThe turn signal flasher and hazard units are usually located located under the dash either to the left or right of the steering column on most models.
  1. Remove the turn signal flasher unit or hazard unit by pulling them up from the electrical connection.
  2. To install, push the unit(s) into the electrical connector

Good luck (remember comment and rated this).

Apr 10, 2010 | 1989 Jeep Comanche

1 Answer

Is this an electrical problem..or not?


2 things posable here

daylight running lighr controller is pooched

or you have a bad multi switch on the columb

try a salvage yard for parts

if you move the signel indacator do the lights go out in between position if wiggled pushed in or pulled out of yes switch likely bad

Jan 08, 2010 | 1989 Jeep Comanche

1 Answer

Belt diagram for a 1989 jeep comanche


Most auto parts stores have a book that shows how those belt go, you should be able to make a drawing from thier book. Sometimes you find one the internet but, I haven't had much luck there.

Jan 05, 2010 | 1989 Jeep Comanche

1 Answer

I need help with a wiring diagram for my 92 Jeep


Review this post, Wiring harnesses & adaptors

Good luck (remember rated this help).

Sep 28, 2009 | 1988 Jeep Comanche

1 Answer

Steering column diagram needed for 1989 Jeep Cherokee


If you intend to keep the vehicle long term, I would suggest you invest in a Haynes Manual, That is worth its weight in gold, for this and any other project..
Regards,DT

Aug 29, 2009 | 1989 Jeep Cherokee

1 Answer

Brake light on 1989 jeep comanche. Sometimes when i apply the brakes the light comes on sometimes it dose not. I need to know what I might need to do to fix the problem.


Hello, this sounds like a brake lamp switch it is located around the brake pedal area, renew this and your problem should go.
Hope this has helped you out.
George.

Jul 16, 2009 | 1989 Jeep Comanche

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...