Question about 1995 Mazda 626

1 Answer

Mazda interchangeable years

Does anyone know if the engine block or heads are interchangeable between the 1995 and 2000 four cylinder engines. or do you know how to find out. Thanks Chris

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 5,568 Answers

There are a ton of 626 forums on the net, those are the best resource for researching that.

http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLG,GGLG:2005-37,GGLG:en&q=mazda+626+forum

Posted on Jun 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine id # f1se b


Help with id'ing my block etc - Ford Mustang Forums : Corral.net ...

forums.corral.net > ... > Windsor Tech Forums > 5.0/5.8 Engine Tech
Dec 31, 2009 - Shouldn't that be 6015 ~ designating that it is an engine block? ... Part numbers do not change every year, they only change when the part is revised. e7te blocks used the same part number ... What would a block with casting # F1SE and E7TE heads be from? ...... 3 Attachment(s) New CCW Vortech JT-B.

The Ford 289 and 302 Engine Block

www.mre-books.com/interchange/interchange2.html
At this site you can find information about Ford small block cylinder blocks and interchangeability. ... and 302 engines were never identified as "Windsor" small-blocks by Ford Motor Company. These ... Block identification is straightforward. ... Beginning in the 1965 model year, the 289 had a .... factory casting numbers, etc.

Geeks On Cars: How to Identify Small Block Fords


Dec 26, 2015 | Cars & Trucks

1 Answer

Engine block interchange


Most salvage yards should have the interchange info you need.

Apr 23, 2013 | Saturn Cars & Trucks

1 Answer

I need troque setting for cylinder head bolts for Madza MX3


zjlimited_1139.jpg

Fig. 1: Cylinder head bolt tightening sequence for all 4-cylinder engines


1. Clean the cylinder head bolts and the threads in the block. Make sure the bolts turn freely in the block.

2. Install a new head gasket on the engine block. Make sure the camshaft sprocket timing marks are still aligned, as set during the removal procedure. Install the cylinder head.

3. Lubricate the bolt threads and seat surfaces with clean engine oil and install them. Torque the bolts in 2-3 steps to 56-60 ft. lbs. (75-81 Nm) in the proper sequence.

Hope helps.

Apr 29, 2011 | 1995 Mazda MX-3

1 Answer

Is a 1999 sl2 engine *(block only) compatiable with any other year engine block?


If your thinking of interchanging the head or short block then you can, depending on the cylinders, because the saturn sl2 2000 and 1999 were one of the few models ever to make a 1.9 liter DOHC. if you have a 1.8 DOHC then you should be fine with a 2001 or 2002

Jan 28, 2011 | 1999 Saturn SL

1 Answer

1994 Mazda B3000 V6 engine oil pushes into coolant. Have to add engine oil all the time and drain the recovery bottle. 65,000 miles. Never been overheated.


Failure of head gasket between cylinder head and block.

Because oil pressure is higher than coolant pressure, oil will creep across poor sealing area of head gasket from the oil riser drilling that feeds the cylinder heads cam assembly's.

Worst case scenario would be a cracked cylinder head/s. No totally unheard of but rare.

Continued oiling of the coolant system will rot out the coolant hoses from the inside to the point they will burst.

Due to the year of this engine it may be prudent to find a used engine with less miles and swap it out.

Jan 18, 2011 | 2007 Mazda B3000

3 Answers

Firing order and number 1 on block on a mazda b 2200 1989


number 1 is in the front of the engine and the firing order is 1342 . . . . dont forget to rate my answer thanks:)

Aug 18, 2010 | 1989 Mazda B-Series

2 Answers

Can I use 2006 or 2007 1.6L engine in 2004 Aveo??


you should be able to interchange them....its every 4 years that they change the design of an engine and i believe yours can be changed since they are within 3 to 4 years difference.you cant always go by the book so you have to look both engines over closely and see that everything looks the same top and bottom and if they are go for it.

Jan 21, 2009 | 2004 Chevrolet Aveo

1 Answer

Mazda b2200 compression specs


those are average numbers and they are a little on the low but that is typical considering the age of the vehicle the compression should be 115 -120 psi.. hope this helps please rate this...thanks

Sep 24, 2008 | 1988 Mazda B2200

1 Answer

Engine parts Cylinder head


Check the casting number on the two heads and see if they are the same. If not, your best bet is to call a machine shop and give them the casting numbers and see if they are interchangable...

I hope this helps

Aug 21, 2008 | 1996 Mazda 626

Not finding what you are looking for?
1995 Mazda 626 Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...