Question about 2001 Chrysler Town & Country

1 Answer

Starter i'm trying to remove the starter on my 2001 chrysler town and country, but i'm having trouble finding all of the bolts...any advice

Posted by on

  • kwkolb Jul 14, 2008

    I have removed the bottom bolt to my starter and the nut on the top bolt with the wires on it, but I can't seem to get the nut behind the wires on the top bolt loose. Does that nut turn clockwise or counter clockwise? I don't want to strip it by turning it the wrong way.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

You'll find 2 bolts that attatch the starter to the trans. housing. Remove the wiring from the starter and the bolts, one of which is towards the top of the starter and one near the bottom.

Posted on Jun 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the starter located on a 2011 Chrysler town and country

You have remove Catalytic Converter and Engine mountes to get to the Starter.
This is the procedure

  1. Disconnect and isolate the negative battery cable.
  2. Remove the catalytic converter (3) See: Engine, Cooling and Exhaust\Exhaust System\Catalytic Converter\Service and Repair\Catalytic Converter - Removal.
  3. Remove the front engine mount through bolt.
  4. Remove the retainers (2) from the front engine mount bracket (1) and remove the bracket.
  5. Remove the field generator connector (1).
  6. Remove the B+ retainer (2) and B+ cable (3).
  7. Remove the stater retainers (1).
  8. Remove the starter (2).

Aug 27, 2017 | 2011 Chrysler Town and Country

1 Answer

Where is the thermostat in chrysler town and country 2001

Follow the top radiator hose back to where it connect to the engine. There is a housing there that the hose connects to. There is two bolts you have to remove to get the housing off and the thermostat is underneath the housing. 4 thumbs up is appreciated if this helps.

Dec 25, 2010 | 2001 Chrysler Town & Country

1 Answer

How to replace starter motor in 1998 chrysler town and country van

Hi. Here is the procedure. Jack the car up,secure good with jack stands,block wheels and parking brakes on.Disconnect battery terminal,use 15mm wrench and 15mm socket,remove 2 bolts through transmission bell housing,remove nut from battery cable to starter,disconnect small wire to solenoid

Sep 13, 2010 | 1998 Chrysler Town & Country

1 Answer

How do I install a turn signal switch on my 2001 town and country?

remove plastic around steering column remove 2 screws holding 4way switch remove 2 bolts for t/s switch install is reverse

Mar 03, 2010 | 2001 Chrysler Town & Country

1 Answer

How to remove starter for 2002 chrysler town & country

There are two bolts to remove, opposite sides. One is a normal bolt, the other one is hidden by wires. Remove the nut on the ground wire, remove the ground wire, use deep socket over this to remove the bolt. It's easier than you think, about an hour and a half total.

Nov 18, 2009 | 2002 Chrysler Town & Country

1 Answer

Help I cannot figure out how to remove the rear DISC brake pads off of my 2001 Town & Country

to remove the rear brake pads you must first remove the caliper slides bolts and compress the caliper pistons them the caliper will remove easily

Nov 11, 2009 | 2001 Chrysler Town & Country

1 Answer

Starter location and layout, can't find second bolt

The second bolt for the starter is directly above the starter the trick is you have to get from the top of the engine and ive learned thats its much easier if you take the driver side fan shroud out of the way it gives you much more room to work

Jun 25, 2009 | 2001 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

Related Topics:

645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides