Question about 2008 Ford F-350

1 Answer

350 chevy small block

I would like to know the easiest and most inexpensive way to get 450hp out of a 350 chevy small block

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

Aftermarket intake, camshaft and either a good set of heads or port/polish what you have. If you go with a cam, go with more adv. duration and duration and .050. I like running a .525 lift, .230 dur. @ .050 and .292 advertised duration. Get a good set of springs and valves. This cam should get your redline around 6200. If you're using this engine on the street, I prefer the Performer RPM with a 1" spacer. This provides plenty of velocity to the heads. If you can find a set of camel hump heads, casting number 041 you'll love those or have your heads ported. I'd run a Edlebrock 1407 carb. with this set up if you're using it on the street. If you're using this engine for strip duty as well, use a single plane intake like a Victor Jr. Professional Products have a nice selection of single plane intakes for a very low price. I've bought one myself and really liked it.

Posted on Jun 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you put stocked 350 cam in 1978 gm 305 engine without changing any other parts ?


Anytime you change the cam shaft you must change the lifters as well. But if you are asking if it is a direct replacement part, the answer is yes. A small block chevy is a small block chevy. A 283 cam will fit in a 400 block or any other block in between.

Jun 24, 2015 | Cars & Trucks

1 Answer

Firing order chevy 350 small block 5.7 v8


18436572 That's been the order since the late 50's, :) You also can look on the intake manifold it's on there too,

Dec 09, 2014 | 1986 Chevrolet Chevy

1 Answer

Valvue adjustment for a 350 small block chevy


just go to ehow on computer, and click on first link on page. when page comes up, type valve adjustment for small block 350. this page will help you!!

Jun 11, 2010 | 1986 Chevrolet Chevy

3 Answers

I'm trying to find out the horse power of my chevy small block engine 1 GM 14010207


Look at the vin # from outside the car through the windshield on the bottom of the drivers side. The 8th digit in the vin # is the engine code. You should be able to look it up on the internet. I want to say 175hp but i'm not certain. It is usually a letter. For example a small block 350 for certain years is the letter M and I believe small block 305 is P.

May 29, 2010 | 1983 Chevrolet C1500

2 Answers

What engine do I have?


I'ts a chevy V8 350 engine. lol

Oct 04, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

I need to know how much pounds is apliied to a 350 chevy cylinder heads


What is the year and model of your vehicle?

On a 1968 Chevy 350 small block it is 60-70 ft/lbs with sealant applied

When torqueing the heads, it is helpful to start at around 25 ft. lbs. and torque all the bolts, then go to 50 ft. lbs., and finally, your specified torque. Doing this in increments will help give a nice even torque to the heads

Jul 25, 2009 | Chevrolet Classic Cars & Trucks

1 Answer

350 chev timing


What exactly are you working on. Are you wanting to know how to install a HEI distributor into a 1970's or 1980's small block chevy? Just wondering, it says 2007 cobalt?

May 15, 2009 | 2007 Chevrolet Cobalt Coupe

1 Answer

Settong the timing on a 350 small block.


On that set up the computer mainly sets your timing. It reads the timing off of the crank sensor, cam sensor, it tells the injectors and coil packs what to do.

Jun 29, 2008 | 1988 Chevrolet K1500

Not finding what you are looking for?
2008 Ford F-350 Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...