Question about 1998 Chevrolet S-10 Pickup

3 Answers

1998 S10 The fuel pump went out and we replace it now it is not fireing dose anyone know with to do next besides blow it up Thank you please asp

Posted by on

  • rayray340 Jul 09, 2008

    My s10 also has a fuel pump problem. the shop said it will cost 800$ to replace the fuel pump!! I am pretty good with cars, so is this a project i can undertake myself or is smarter to have the shop fix it? ( thats alot of money i dont have)

  • Anonymous Jul 17, 2008

    We are having the same problem. The fuel pump was replaced but the truck still won't start. The gas is not pumping at all.

×

3 Answers

I had this problem as well. turned out being a problem in the wiring harness that plugs into the top of the pump. I cut in an access panel in the bed of the truck over the pump for ease of installation. the bad part is the wiring harness isn't cheap either ($120).

Posted on Jul 20, 2008

I take my bed off. Its eight bolts and the fuel pump is easy... I just support my bed with a long 2*4. Its very easy to do!

Posted on Jul 12, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Well does your fuel pump kick on when you turn the key if so check the spark plugs and wires if not check the relay to your pump or check the fuze and see if it is blown or getting any power to it

Posted on Jun 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NEED TO KNOW WHERE THE FUEL PUMP RELAY SWITCH IS FOR A 1998 CHEVY S10 TRUCK...


For the 1998 s10 theres no fuelpump switch, there is a fuelpump relay. the relay is in the engine compartment inside the fuse/relay box. the relay will be labeled on the inside cover of the fuse/relay box cover. besides the relay the only other problem for a fuelpump not working on these trucks is the fuelpump is bad or the wiring connector to the pump is bad.

Aug 27, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

98 s10 pickup hard to start **** when it dose it idles fine u hit the gas it dies its got an new fulepump n filter and cam n cranksensor plugs n wiers and map n tps sensor and i made sher i got 12v to the...


Does it sound like it is flooding or is it a fuel deporvation problem? From your limited description of the problem it sounds more like a fuel deporvation issue which means the fuel pump/filter/gas line. Did you check to make sure that you are getting good fuel flow and pressure from the fuel pump? Or did you just change them and not run a test?

Jul 01, 2011 | 1998 Chevrolet S-10 Pickup

2 Answers

The gmc will not start on first turn of key, you have to turn it on and off several times be for it will fire and then start?


time for a new fuel pump sounds to me .u might try replacing fuel filter .but if that helps it wont be long for the pump.hope this helps

Nov 14, 2010 | 1997 GMC Sonoma

1 Answer

It will crank but does not start i changed the fuel filter and still it will not start i have a 1998 v6 chevy s10 pickup


Check to make sure it is getting fire. You can also hook a pressure gage to the fuel check valve should be near the fuel rail to see if you are getting a good constant fuel pressure. usually fuel problems will let the truck start but not stay running unless you are getting no fuel at all if thats the case it usually means your fuel punp is not working. with your key turned on your fuel pump should be running you can just bleed the check valve to see if you are getting any fuel pressure at all if you are getting none check the fuses and see if you are getting any power to the fuel pump if the fuse is blown then you can try to replace it if it blows again the fuel pump is bad or you have a short somewhere most likely.

Nov 12, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

My 99 s 10 WONT START and i CANT FIX IT !!!! help plz


Have you checked your fuses? the only thing that comes to mind is ignition coil, This part is what supplies the distributor with energy to fire the spark plugs which seems to be your problem.

Mar 02, 2010 | 1999 Chevrolet S-10 Pickup

2 Answers

Fuel stopped working, no fire to spark plugs


When I hear no fuel or fire I always think of ignition module first. The moudule tells the coil when to fire, and if you don't have fire at the plugs then the fuel pump won't run due to saftey issue. Take your module in to parts store and they will test for free.

Sep 09, 2009 | 2004 Chevrolet Cavalier

5 Answers

Where is the oil sending unit located on a Chevy S10 Pickup.


MY S-10 IS LEAKING OIL. I WANT TO KNOW WHERE THE OIL SENDING UNIT IS.

May 29, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Turn signal relay switch, 94 s10 chevy blazer


It's behind the dash panel just below the steering column. There are two relays for the fuel pump back there. Chande them both out.

May 27, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

97 s10 blazer cuts out and loses power while driving.


Had the same problem with by 1998 S10 a couple years ago. Changed fuel filter?? didn't work. Changed the fuel pump?? didn't work. Changed the fuel pressure regulator?? didn't work.

I was about to the end of my rope when I put a timing light on it and it showed firing on cylinders more then once a cycle. Turns out my distributor cap was bad and spark was jumping between contacts. When a spark is spread out over more then one cylinder, it doesn't fire correctly and that is causing it to bog out. Simple and a lot cheaper then all the other fixes I tried. Crank sensor was my next option though.

Feb 01, 2009 | 1997 Chevrolet Blazer

2 Answers

1998 900S turbo overboost


the turbo waste gate has vacuum to it regulated to make it open at a specific psi... try turbo city in anaheim,Ca for more answers to aftermarket stuff

Jan 13, 2009 | 1998 Saab 900

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...