Question about 1984 Toyota Pickup Deluxe

1 Answer

1984 toyota pickup timing belt

I AM TRYING TO INSTALL A TIMING BELT NEED HELP

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

To clarify, on the DOHC engine, the intake cam gear has a line on it, and the exhaust cam gear has an arrow on it. These should be lined up with the corresponsing line and arrow on the VALVE COVER, pointing straight up. I just went through this process over the weekend, and spent quite a bit of time looking for these marking as I had removed the valve cover. Once I found them, it was plain and simple.
In addition, be sure to not over tighten the belt when reinstalling. The tensioner has markings on it for "old" and "new". DO NOT adjust past "new", as the car will sound like a jet engine, and the belt will not last for very long.
One more item that you may as well replace while you are in there is the cam position sensor if you have not already, as there have been issues with them, and the timing housing has to be opened to get to it.

Posted on Jun 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change water pump 1990 3.0 sr5 toyota pickup


Water pump is timing belt driven. Change your timing belt too. Drain the coolant/antifreeze and everything on the front of the motor has to come off. Make sure you have the timing marks lined up

Jul 01, 2014 | 1990 Toyota Pickup

1 Answer

How to change a timming belt on honda civic


Timing Belt and Tensioner REMOVAL & INSTALLATION 1984–87 Engines
  1. Turn the crankshaft pulley until it is at Top Dead Center.
  2. Remove the pulley belt, water pump pulley, crankshaft pulley, and timing gear cover. Mark the direction of timing belt rotation.
  3. Loosen, but do not remove, the tensioner adjusting bolt and pivot bolt.
  4. Slide the timing belt off of the camshaft timing gear and the crankshaft pulley gear and remove it from the engine.
  5. To remove the camshaft timing gear pulley, first remove the center bolt and then remove the pulley with a pulley remover or a brass hammer. This can be accomplished by simply removing the timing belt upper cover, loosening the tensioner bolts, and sliding the timing belt off of the gear to expose the gear for removal. NOTE: If you remove the timing gear with the timing belt cover in place, be sure not to let the woodruff key fall inside the timing cover when removing the gear from the camshaft. Inspect the timing belt. Replace if over 90,000 miles old, if oil soaked (find source of oil leak also), or if worn on leading edges of belt teeth. Fig. 1: Timing belt and front cover assembly — 1984–87 engines 86833161.gif
    Fig. 2: Positioning the crankshaft and camshaft pulleys before installing the timing belt — 1984–87 engines 86833162.gif
    Fig. 3: Timing belt tension adjustment — 1984–87 engines 86833163.gif
    To install:
  6. Be sure to install the crankshaft pulley and the camshaft timing gear pulley in the top dead center position. Align the marks on the camshaft timing gear so they are parallel with the top of the cylinder head and the woodruff key is facing up. NOTE: When installing the timing belt, do not allow oil to come in contact with the belt. Oil will cause the rubber to swell. Be careful not to twist the belt unnecessarily or bend in a 90°angle, since it is made with fiberglass; nor should you use tools having sharp edges when installing or removing the belt. Be sure to install the belt with the arrow facing in the same direction it was facing during removal.
  7. After installing the belt, adjust the belt tension by first rotating the crankshaft counterclockwise 1/4 turn. Then, re-tighten the adjusting bolt and finally the tensioner pivot bolt.
  8. Replace the other components removed for belt access.
  9. Start the car, check timing and adjust if necessary WARNING
    Do not remove the adjusting or pivot bolts, only loosen them. When adjusting, do not use any force other than the adjuster spring. If the belt is too tight, it will result in a shortened belt life.

Aug 31, 2010 | 1986 Honda Civic

2 Answers

I need help to replace the timing belt well theres two rubbers its the lower rubber that broke. HELP PLEASE....


Well my friend first I need to know a little bit more. Now when you say rubbers, what do you mean? Your timing belt and gears consist of a cam shaft gear or sprocket, a crank shaft gear, and a tensioner located under the valve cover and behind the timing cover that is behind the crank shaft pulley. Can you help better understand which rubber thing broke?

Aug 18, 2010 | 1988 Toyota Pickup

2 Answers

Timing belt diagram


CLICK on the following LINK. It has the Timing Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1995/make/toyota/model/pickup/1995_toyota_pickup_timing_belt_diagram_marks.htm

Mar 03, 2010 | 1995 Toyota Pickup

1 Answer

HOW DO YOU ADJUST THE TIMING ON A 1990 TOYOTA PICKUP (CARBURETOR)


Timing belt and Timing Chain:

Make absolutely certain the marks on the camshaft pulleys are aligned with the marks on the rear belt cover. Check the lower belt pulley; align its mark with the mark on the oil pump housing.


e861b82.jpg

Fig.: Mark the position of the belt if it is to be reused

More details can find in autozone.com (free register). Select your year, make, model, engine for details.

Hope helped.

Oct 24, 2009 | 1990 Toyota Pickup

1 Answer

Timing belt installation


Good afternoon! Ive got you covered on this one! Have a great weekend!! I have enclosed figures for the diesel engine,the 8 valve gas and 16 valve gas. yours should be the 16 valve configuration as you will see in the figures.a3c1ad4.gifaf8e237.gifbc25dec.gif021398e.gif00bd376.gif5a4b57b.gif

Sep 25, 2009 | 1984 Mitsubishi SPX Pickup

1 Answer

Timing belt confusion


take timing belt cover off and check for binding possibley belt tention set to tight...

Jun 01, 2009 | 1990 Toyota Pickup

1 Answer

TIMING MARKS ON 2CT


Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1984/make/toyota/model/pickup/1984_toyota_pickup_timing_belt_diagram_marks.htm

Apr 13, 2009 | 1984 Toyota Pickup Deluxe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...