- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Depends on what needs wiring, id find a haynes manual in paper or digital form and find out, usually they have all the wiring info youd need but it really depends on what your wiring up.
Usually under the dash there is a fuse, but please fix the short in the wire before you replace the fuse. Otherwise it will continue to short out. Good luck.
Guys he has a Z24, Not KA24, Z24 for one, Is carbed and has older lifters and valves. They need to be tuned to spec within a certain specific limit and the cams must be rotated in certain positions when doing different valves, etc... Shouldnt take very long normally and its not a hard process but if you have a tick, you really should get it checked out. Btw, the Z24 engine's idle isnt controlled by ecu at all or else the carb wouldnt need an idle adjustment screw.
I have a 81' Nissan 720 pickup. The turn signals and hazard lights have stopped working after having to remove the dash for a radio install can someone suggest how I can get them working again... Thanks kindly. Kris in LC,NM..USA
The firing order on an in-line four cylinder engine is 1-3-4-2, with cylinder 1 being the closest to the radiator in a rear wheel drive, or the closest cylinder to the alternator, power steering, AC pulleys for a transverse mounted engine. Please don't forget to rank this solution.
×