Question about 1999 Isuzu Trooper

1 Answer

Isuzu bighorn starting issues

My 3.0 turbo diesel cranks strong but will not start.
any solutions?

Posted by on

  • wwwwh Aug 28, 2008

    I have the same problem with my 1996 2.8L diesel turbo. If I put my foot down on the accelerator, pump it and crank, it does start sometimes. Other times it won't. Any suggestions?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I think you must be check starter ring first,my experience to repair Isuzu truck, the stater ring was release from flywheel, not wonder but its could be happen.Try check first.

Posted on Sep 12, 2008

  • safa69 Sep 12, 2008

    how to check when the stater ring problem, you can hear 'swinggg' when you kick engine. Second, call your friend to help you push up car and you seat the gear for 1 or 2. When your car can be start, 100% sure your stater ring problem.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We live in New Zealand and own a 1998 Isuzu Bighorn, 3.0D. About 3 months ago it started idling roughly and stalling just after starting. Then it stalled on me when I was driving 70kph. It also has no


wow first post ever posting country ,what a brave person. !!!!
welcome to USA forums ,that have no such car.(truck)
the line up. (wiki list) so its 3.0L 4JX1
stalls and lost power.
The 4JX1 is a 3.0L direct injection diesel engine, turbo, some intercooled, which replaced the 4JG2 in the Isuzu Bighorn/Trooper/Holden Jackaroo. It uses unit injectors and 4 valves per cylinder.

can be caused by many reasons. get it scanned yet. ?
or see FSM book on flash codes from the direct injection fuel
controller? (per this engine option and market)

does turbo have proper boost? (PSI boost or +1 bar boost?)
does it even have a boost gauge.?
there are over 50 causes, of stalls (most inside engine)
but its not getting boost or the injection rates are wrong.
there are basic tests for each covered in the FSM
Factory (oem) service manual, with coverage for this engine.


3.2 L 6VD1 SOHC V6
3.2 L 6VD1 DOHC V6
3.5 L 6VE1 DOHC V6
3.0 L 4JX1 TD I4
3.1 L 4JG2 TD I4

Feb 15, 2015 | Isuzu Cars & Trucks

1 Answer

Can an overheated transmision make the car to fail to start. my isuzu bighorn cant start


no,
run at full speed, yes, can fail
the engine must crank to start, (a/t cars only) and if cant crank it cant start.
so if it cranks,(old post) then next is spark
then try test fuel if spark is good on unstated engine
its not a diesel is it?

Dec 22, 2014 | Isuzu Cars & Trucks

1 Answer

1992 isuzu bighorn 3.1 turbo diesel, rebuilt injection pump, will not cold start


1: compression good.
2: glow plugs hot.
3: test fuel, does test fuel work??????
yes, you did it wrong
no, #1 or #2 caused.

Aug 27, 2014 | Isuzu Cars & Trucks

1 Answer

Isuzu bighorn diesel


run the fault codes to find the reason for the engine light and the transmission light

Mar 14, 2014 | Cars & Trucks

2 Answers

Need workshop manual isuzu bighorn 1996


1996 model Isuzu bighorn plaisir 3.1 D engineoil

Jan 14, 2012 | Cars & Trucks

2 Answers

Head Bolt torque settings for a 3.1 bighorn turbo Deisel


What is the torque for the crank pulley for 3.1turbo

Dec 21, 2010 | 1996 Isuzu Trooper

1 Answer

Turbo timer installation 94 isuzu bighorn


CAN YOU FIND IT THE ENGINE AND A/T WIRING DIAGRAM

May 03, 2009 | 1994 Isuzu Trooper

2 Answers

1998 Isuzu Bighorn Diesel. The car just won't start. My local dealer can start it using a cold start spray. But he has not been able to solve the problem. Please could somebody help


I have a 1998 Bighorn 3.0L if the wrong grade of oil is used in the motor it miss fires and runs rough, due to the injectors being oil pressure controlled, I have heard of extreme cases causing a failure to start when cold. good luck

Feb 17, 2009 | 1997 Isuzu Trooper

4 Answers

Isuzu 4JX1 EngineWont Start after replacing new injector


my isuzu bighorn will not start after changing valve seals and head gasket and after setting timing it still will not start. do you have a solution.

Aug 09, 2008 | 1999 Isuzu Trooper

Not finding what you are looking for?
1999 Isuzu Trooper Logo

Related Topics:

567 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...