Question about Renault Sport

1 Answer

Renault megane clutch

Please can someone tell me which way the orange plastic disc on the clutch plate faces
does it face the flywheel or the gearbox
Thanks Mark
e-mail: spies@storm.co.za

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

Unsure about Reanult-specific app here, but usually the higher-deck faces the pressure plate. The springs on the disc are higher on one side. I'm sorry I don't know about Renault exactly.

Posted on Jun 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where added oil gerbox Renault megane 2005


Renault usually have a plastic wing nut type of bolt either at the front of the gearbox ( facing the radiator) or by the drive shaft

Jan 24, 2016 | Renault Cars & Trucks

1 Answer

I have removed the gearbox from my 2000 MB 100 Van. I found the clutch plate has disintergrated. I noticed the Flywheel clutch pressure face looks like it will come off. Is there more to this clutch system...


flywheel bolted to engine, clutch disk and pressure plate, also has a throw out bearing that should be replaced at the same time.
you don't need to replace the flywheel unless it is cracked though you should have it turned down at a machine shop.

Oct 11, 2012 | Mercedes-Benz Cars & Trucks

1 Answer

Renult megane o3-19-DCI Replacing clutch plate dont know which side to presure plate.


Hi,
look at the clutch plate centre hub. The side which fits to the pressure plate is generally raised further than the side which fits to the flywheel side if you have the old pressure plate and clutch plate, look at the pattern on the clutch plate, it will be emulated on the pressure plate..

Hope that you have had the flywheel 'skimmed' to ensure good contact with the clutch plate. It would be a good thing to also check the spigot or nose bearing / bushing in the flywheel. All should be replaced as a set, pressure plate, spigot bearing,clutch plate, release / throwout bearing and the flywheel skimmed.or replaced if necessary.

Happy motoring.

Feb 01, 2011 | 2003 Renault 181

1 Answer

I HAVE A 1999 SATURN SL PUT NEW CLUTCH IN AND A NEW PREBLEED CLUTCH MASTER CYLINDER AND SLAVE CYLINDER,HAVE GOOD CLUTCH PRESSURE WHEN PUSHING DOWN PEDAL BUT CLUTCH IS NOT ENGAGING. ANY IDEAS?


Are you certain you or your mechanic installed the clutch plate facing the right direction? It is usually marked on one side to tell you which way to face it. I have personally done this and had the same issue, if the hub portion of the plate is rubbing on the flywheel it won't kick out or in all the way, and if left it can cause damage to the flywheel.

Good luck.

Are you certain you or your mechanic installed the clutch plate facing the right direction? It is usually marked on one side to tell you which way to face it. I have personally done this and had the same issue, if the hub portion of the plate is rubbing on the flywheel it won't kick out or in all the way, and if left it can cause damage to the flywheel.

Good luck.

Apr 04, 2010 | 1996 Saturn SC

1 Answer

Renault megane gearbox grinding


have you checked the front brake discs and pads. and the backing plates they may be rubbing the discs

Oct 08, 2009 | Renault Sportwagon Cars & Trucks

1 Answer

Need to know how to replace clutch on my 2004 kia


Hi there,

I hope below steps can help...

1. Remove the transaxle.
2. If the pressure plate will be reused, paint or scribe the alignment marks on the pressure plate and flywheel for assembly reference.


Do not allow oil or grease to contaminate the clutch disc facing Even a trace of oil or grease may cause clutch grabbingor slipping. Handle the disc by its edges and do not touch the facing.
Loosen the pressure plate bolts one turn at a time to release the pressure plate spring tension evenly. A failure to release the tension evenly could cause distortion of the pressure plate.


3. Remove the pressure plate bolts, the pressure plate, and the clutch disc. While loosening the bolts, use SST to prevent turning of the flywheel.


2b00131.jpg




Regards,
Jeep Brainy


1.

Sep 20, 2009 | 2004 Kia Optima

1 Answer

2003 Tiburon 6 spd clutch replacement now tranny won't respond


Possibility, you may have intalled the clutch disk backwards.... if so, the disk hub is torqued against the crankshaft hub preventing engagement of the clutch. 2003 TIBUORN DUAL MASS FLYWHEEL AND CLUTCH DISC ASSEMBLY INSTALLATION PROCEDURE DESCRIPTION: The 2003 MY 2.7L Tiburon vehicle equipped with the 6-speed manual transaxle employs a dual mass flywheel system. The 2003 Tiburon Shop Manual does not show the clutch disc assembly with the dual mass flywheel. This bulletin provides information about how to assemble these components. NOTE Although it is possible to assemble the clutch disc with either side facing the flywheel surface, only the assembly of these two parts shown in this bulletin is correct.
PARTS ASSEMBLY:
  1. Attach the dual mass flywheel to the engine crankshaft assembly.
  2. Identify the clutch disc flange side and the collar side as shown. 0240025a.gif
  3. Install the collar side of the clutch disc on the dual mass flywheel surface so that the flange side is facing the pressure plate side as shown. 0240025b.gif
  4. Attach the pressure plate to the dual mass flywheel and complete assembly of the remaining components per the Shop Manual procedures. 0240025c.gif

Dec 14, 2008 | 2004 Hyundai Tiburon

3 Answers

Renault megane tdc location?


http://www.forum-auto.com/les-clubs/section21/sujet214136-280.htm

Nov 30, 2008 | 2003 Renault 181

1 Answer

Renault Megane sport 1.6 2000


gearbox needs changed or clutch release bearing

Oct 03, 2008 | 2000 Renault 181

1 Answer

Clutch on renault megane 1.4 98


the raised side faces the gearbox side

May 31, 2008 | 2003 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

865 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...