Question about 1993 Mercury Villager

2 Answers

Brakelamps and high-mount brakelamp

Brakelamps (rear) and high-mount brakelamp continuously to be ON, even though lights are off, or park brakes are off and even if engine is OFF.


Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The brake light switch may need to be replaced. It sounds like it is stuck in the "connected" positon. If it is stuck in the "disconnect" position, then you may not be able to switch to "D" drive. The switch is very easy to replace and located just above the brake pedal. I suggest to get an OEM from the dealer instead of a cheaper one from the parts store. It costs about $25 .vs. $9.99. I had to replace the cheap ones twice.

Posted on Feb 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try the dimmer stich on the did that to me.

Posted on Jul 04, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do i buy a high-mount brakelamp at for a 1997 mercury mountaineer?

do you mean 1 of these?

Mar 07, 2011 | 1997 Mercury Mountaineer

1 Answer

96 F250 can't shift out of park

NOTE: Your vehicle is equipped with a

brake-shift interlock feature. This

feature prevents you from shifting

from P (Park) unless you have the

brake pedal depressed. (The ignition

must be in the ON position.) If you

cannot shift from P (Park) with the

brake pedal depressed:

1. Apply the parking brake.

2. Remove the key.

3. Insert the key and rotate one position
clockwise (ignition in the OFF position).

4. Apply the brake pedal and shift to N

(Neutral). (If the vehicle is shifted to P

(Park), you must repeat the previous steps.)

5. Start the vehicle.

If you need to shift out of P (Park) by using the

alternate procedure described above, it is

possible that a fuse has blown and that your

brakelamps may also not be functional.




check fuse 13 based on the attached diagram.

If this fuse is bad replace it. If it is not bad, blows again, or continues to be stuck in park then you need a new brake interlock switch that can be found on the brake pedal up underneath the dash.mustang_guru_2.jpg

Jan 12, 2011 | Ford F-250 Cars & Trucks

2 Answers

I have a 1992 Honda Accord. There is no power on the brake light in the rear window. In order for this to be inspected, I think this has to work. Let me know. Thanks

1992 honda accord ex 4door the brakelamp indicator light on the dash is always on and my rear brake lights stay on even when the car is turned off

Sep 27, 2010 | 1992 Honda Accord

1 Answer

Gear selector will not go into park, also abs light comes on after 5 mins of runnning, and check engine light comes on at the same time. but the engine is running fine and all fluids are topped up. i think...

check all fuses first, make sure brake lights are working.the soliniod that operates shift lock sounds like its not working, sometimes its the fuse or brakelamp switch. hope this helps.

Oct 23, 2009 | 1998 Dodge Durango

1 Answer

How do I change my high mount brakelamp on my 1995 Ford Explorer?

Pop the hatch and you can pull the trim piece off the back of the light assembly

Then remove the bolts to release the ballast assembly.

Then you can remove the nuts that secure the light assembly.

For the explorer, there were two parts for the brake light assembly. A fluorescent light element, and a ballast and no actual bulbs to replace.

I believe the ballast is the cheaper of the two parts and sells for around $90 from the dealership

Sep 30, 2009 | 1995 Ford Explorer

1 Answer

I need a wiring diagram for a 1996 grand-am. the brake lights stopped working but the 3rd brake light still works.

I assume the stop lamp bulbs are OK.
Check the ground connection is ok at the rear brakelamp sockets.

Sep 07, 2009 | 1996 Pontiac Grand Am

1 Answer

Door ajar and brakelamp lights on dash go on randomly for no reason, sometimes very bright, and sometimes not so bright. At first it would come on for a few seconds. Now it seems to be happening more and...

The brakelamp could mean brake probs or brake light needs repairing for the door ajar it could mean that the censor in the door isn't reading properly. It could also be a short in the dash wiring.

Aug 08, 2009 | 1991 Honda Accord

1 Answer

My brakelamp indicater light is on is it just a fuse or how do i fix it

it means one of your three brake lights are out. check the two on the trunk and the one in the rear windo.

Feb 21, 2009 | 2002 Honda Accord

1 Answer

Braklamp is staying on

easy one for you if you remove the lower dash panel as this will make removing the brake light switch a lot easier and look at the top of the brake pedal you wil see the brake light switch it will have two wires going to it first just remove the wires and see if the brake lights have gone out if so replace the switch i am presuming it is both lights that are on yates210456

Jul 05, 2008 | 2001 Honda Accord

Not finding what you are looking for?
1993 Mercury Villager Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

77499 Answers


Level 3 Expert

5622 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides