An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: abs system on s10 4x4
You happened to choose the wrong mechanic(s). How much did you pay them
for not doing anything to help you? I can't figure out myself from my
position what your problem(s) might be. You need to report those
mechanic crooks to the BBB of your city (they DO claim to operate a
bonefide business, don't they?) and ask around to find a good,
reputable, recommended garage to take your auto to.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check that the abs sensor is properly connected, if it is, then try disconnecting the battery for about 5 minutes and depress the brake pedal and turn ignition key on and off. Then reconnect the battery.
If that doesn't work erase the abs code with the scanner that should fix your problem.
There are ABS wheel speed sensors on the front wheels behind the hubs. It is possible if the hub where replaced either the pick up ring mounted to the hub itself was not installed or might have purchase non abs hubs or they just did not switch the wheel speed pickup ring on the new hub. Another thing could be either the wheel speed sensors are mis adjusted or when they replaced the hubs they hung the spindle by the abs wire and either pulled it out of socket or messed up the wires internally. Here is a basic abs system http://www.ehow.com/how_8511860_diagnose-abs-brakes.html if you have any other questions please let me know. Also please leave good feedback.
All the hubs on the car have the abs sensor built into the hub. The abs system has to be re set to read the sensor . The rear hub bearing if noisy should be replaced. There are wiring harnesses that connect to the abs sensor. The harnesses to each of the abs sensor should be replaced.
i have a 2002 chevrolet impala and the same thing happened to me. abs light came on as well as my traction controll light. when i would step on the gas or brakes my car sounded like the brake pads were skiping against my rotors. i had my hub sensor replaced 5 times. the machanic kept telling me it was the part that need to be replaced.they hooked it up to have a dianostic done and the computer keep telling them to replace the hub sensor. so finally we brought my car to an electric auto shop. they found it was a loose wire that was turning my brakes on and off.(haywire)they fix my car in 30mins.