Question about 2008 Toyota Camry
Hello. Welcome to FIxYa. Please allow us to assist you
The maintenance required light is there to remind you that your oil change is due. This light needs to be reset after the oil ic changed, it is manually reset. If you just had your oil changed, the light will not go off by itself. The light is designed to illuminate after 5,000 miles since the last reset procedure.
Posted on Nov 19, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
OK ON YOUR SPEEDOMETER, THERES TRIP A, TRIP B, AND THE REGULAR ODMO... U NEED TO PUT IT ON TRIP A (WITH THE KEY OFF) ONCE U GET IN ON TRIP A, PUSH AND HOLD THE BUTTON DOWN,WHILE HOLDING BUTTON DOWN TURN KEY ON, YOU WILL SEE LINES POP UP ON THE ODOMETER, (WHERE THE MILES ARE DISPLAYED) THEY WILL GO OUT ONE BY ONE, ONCE IT STATES 0 YOU ARE GOOD TO GO.. GOOD LUCK AND THANK YOU FOR USE FIXYA.COM..KEITH..
Posted on Mar 14, 2009
SOURCE: maintenance required
That is a friendly "get the oil changed light" and a reminder that a 25K service is due. To get rid of the light, push down the "A" trip reset button, turn the car off (while holding the button down), and turn the ignition on but don't start the car - while still holding down the A reset button. You'll see a count up meter on the display that will tell you when the system is reset. Enjoy.
Posted on Jul 19, 2008
that light is the samething with check engine light,you have to take your car to mechanic they will help you daginose it and they will clear the light,but your car need some servicing.bye
Posted on Aug 07, 2009
SOURCE: 2008 Scion XD
I don't know for sure, but I'd imagine oil, oil filter, and air filter changes, tire rotation, brake and strut inspection, and maybe a cabin air filter change. Look in your owner's manual near the back - each service should be spelled out in there so you don't go in unprepared.
Posted on Aug 02, 2008
You can take it back and have them reset the light that they for got to do. Or check your manual and do it your self. I think you push the trip setter and hold it until the dashes disappear. Or go to trip a and then push and hold.
Posted on Jun 07, 2009
Tips for a great answer:
Jan 28, 2014 | 2008 Toyota Camry
Oct 11, 2012 | 2008 Toyota Camry
Mar 07, 2011 | 2007 Toyota Camry
1) Make sure your display is on "odometer" not on a trip setting.
2) Push and hold the reset button
3) Turn the key to the ON postion (while continuing to hold the reset button).
4) Watch for the light to blink and then go out.
5) release the reset button
Nov 03, 2010 | 2008 Toyota Camry
Oct 11, 2010 | 2008 Toyota Camry
Mar 22, 2010 | 2008 Toyota Camry
Oct 08, 2009 | 2008 Toyota Camry
Aug 07, 2009 | 2008 Toyota Camry
Jun 05, 2009 | 2008 Toyota Camry
Sep 28, 2016 | 2008 Toyota Camry
2,932 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: