Question about 1988 Acura Integra

Open Question

How Do I Fix My Timing On My 88 Acura Integra???

My car wont start because the timing is off.
I was wondering if you could tell me how to do it because i don't have a book.

Posted by on

  • veescutlass Apr 29, 2009

    I installed the belt and the car started but wouldn't go over 3000 rpm.

×

5 Suggested Answers

  • 1779 Answers

SOURCE: acura integra engine torque specs

56 ft lbs torque main bearings, NON v-tech engine.

Posted on Jan 15, 2009

  • 290 Answers

SOURCE: Failed Smog test because of ignition timing

16 Degrees if you have the 1.8L PFI DOHC 4cyl

Posted on Mar 24, 2009

JShreader
  • 50 Answers

SOURCE: What is the timing order for a 1987 acura integra

Hello baddboy1221, my name is JShreader. Thank you for choosing fixya.com.

The Firing Order for your 87 Acura Integra is...

Firing Order: 1 3 4 2

c409a65.jpg
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

Posted on Apr 01, 2009

  • 1 Answer

SOURCE: 95 Acura Integra starting problem

This happened to me on a 95 Integra GSR and the entire starter did not need to be replaced, just the solenoid pieces. They get old and worn down and the plunger no longer makes a good connection with them, hence the "click". Replace the solenoid panels and sand the plunger and your good as new. You can find instructions for this on the net, just do a search for it.

Posted on Jun 05, 2009

YellowNo5
  • 268 Answers

SOURCE: acura integra rs no spark no fuel pressure

Could be the main relay. It's behind the dash up above your gas pedal. Look for a gray and brownish box with one large plug in it. Should be easy to find since you don't have cruise control. It will be secured with one 10mm. You can bring it into reach with it still plugged in. Try starting it while tapping on the little plastic box. If it starts, pry off the cover with a flat head screwdriver and re-solder the broken connections. The break in the solder will be on the side with the sharp little things. It will be smaller than a hair. To find it you will need to wiggle it. Have plenty of light. Just hold the soldering tool on the broken one until the solder puddles around it and you're fixed.

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 92 Acura Integra is not starting could it be my transmission fluid level


Search Results

    "No start" Due to Failed Fuel Pump Relay : Acura Integra ...

    repairpal.com > Problems > Acura > Integra
    where is the fuel system relay located at?I have replaced the distributer 2 times and also the... 1992 Acura Integra. fuel pump???? The car does not start unless I ...

    92 Integra wont start! Very weirdo problemo... - Honda-Tech

    honda-tech.com/acura-integra.../92-integra-wont-start-very-weirdo-probl...
    Jun 13, 2012 - Re: 92 Integra wont start! Very weirdo problemo ..... 91 Integra LS Defroster/Water Leaking, Bigmo5328, Acura Integra, 8, 01-30-2014 12:14 PM.

    92 DA9 WILL NOT START!!! - Team Integra Forums - Team Integra

    www.team-integra.net > ... > Generation Specific > Generation Two

    Apr 5, 2010 - 11 posts - ‎9 authors
    I just bought a 92 integra with the B18A1. The guy I ... Team-Integra.net is the premierAcura Integra Forum on the internet. ... But it still won't start and I don't know what is up. .... Engine will not rotate when attempting to start 98 gsr cranks but won't start. - Team Integra Forums ...
    10 posts
    Feb 9, 2012
    1992 Acura Integra NO SPARK! - Team Integra Forums ...
    15 posts
    Feb 5, 2012
    92 integra wont start after driving - Team Integra ...
    15 posts
    Oct 17, 2010
    Car wont start! has fuel but lil spark..? - Team Integra ...
    15 posts
    Dec 1, 2008
    More results from www.team-integra.net

    My '92 Integra cranks but does not s

Jan 21, 2016 | Acura Cars & Trucks

1 Answer

1991 acura integra stalls or wont start runs rough


Integra stalls because you need a tune-up. And have the timing checked. I bet you need a new distributor too. And have the ECM (car computer) checked as well.

Mar 14, 2014 | 1991 Acura Integra Hatchback

1 Answer

My acura integra turns over but wont start


three things are needed for start. fuel, spark, timing. spark can be checked with a spark checker available at your local auto parts store. gas delivery can be verified by depressing shrader valve in supply line, but delivery to the combustion chamber is harder to verify. can you force feed fuel to it at the throttle assembly, maybe with a spray can of carb cleaner? have fire extinguisher handy just in case. if it's turning over quickly without free spinning, backfiring, or spitting, the timing is probably ok.

Sep 04, 2010 | 1995 Acura Integra Coupe

1 Answer

My 2001 acura integra won't start. I've replaced


OPEN DISTRIBUTOR CAP, LET A FRIEND START THE CAR, IF ROTOR IS NOT TURNING , YOU TIMING BELT IS GONE.

Jul 24, 2010 | 2001 Acura Integra

2 Answers

Replaced water pump and timing belt and the car wont start i think the timing is off it did run before the fix


heres a diagram, make sure your timing marks are lined up,but you may have cause engine damage if the belt was installed and the gears not lined up, the pistons may have bent some valves, the only way to know is to check the marks,7ddd0df.gif

Apr 07, 2010 | 1992 Acura Integra Hatchback

1 Answer

I was driving my 88 integra rs and it just cut out... i checked the timing belt and the battery but it still wont start does anyone know what would cause that?


Integras are known for igniter assembly failure. Depending on engine year and model may be located inside of distributor or on inner fender well. Check for spark at spark plugs, if no spark and cap and rotor o.k. suspect igniter. If you have spark check for fuel pressure with test gage, if fuel present, check to see if injectors are firing. (noid light will prove this out). If injectors not firing suspect cam posotion sensor. If no fuel pressure suspect fuel pump or clogged filter.

Dec 26, 2009 | 1988 Acura Integra

2 Answers

My 1991 acura integra misfires when neutral


change plug wires, plugs, and it should be fixed. especially plug wires.

Jul 10, 2009 | 1991 Acura Integra Hatchback

1 Answer

My acura has gas and spark but wont start!


it sounds like your timing belt has jumped.

Feb 17, 2009 | 1991 Acura Integra Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...