Lost the key to my 1998 chevy lumina/ls 4d vin # 2g1wl52m3w9149900 how and where do i get another went to dealer said they couldnt get me one without the car there and without the key i cant even put it in gear thank you

go to a dealer or an authorized locksmith and have a key cut using vin

It is possible that the key that he cut is a fraction out of align with the tumbler pins and that is registered as a wrong key combination. Have him check length of the key from the last tumbler to the pin . or take the key to a locksmith and see it anything can be explained as to why it will not turn

most likely the ignition key cylinder gotta get from dealer with ur vin

You have to contact the dealer that you bought the car from or go to a lincoln dealer with the vin number and proof that you own the vehicle ( title, Registration, etc.) and they'll have to burn you a new key.

Call the dealer give them your vin number.

With the title and an insurance card your dealer can cut a new key by the VIN if you have never replaced the lock cylinder before. If not it will be remove the column covers, drill out the lock and try not to damage the lock housing. Good Luck

Is the car locked? If not remove the glove box lock or a door lock and take it to a locksmith to make a key for you.

Solder and shrink tubing work fine for that. That is for the pk2 theft module that tells the car that you are using the correct key with the chip in it.

hi thee the easiest way to get these is call the dealer and go in you will have to prove that you own the vehicle

from the vehicle vin number they can get you a new set of keys
i have done this personnely