Question about 1992 Chevrolet Lumina

1 Answer

Replace ac107 valve

Need to know where its located

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

My 1997 Grand AM low pressure valve is on the air conditioner. I had to access it from the under the car. It has a blue cap on it. IF your looking from the top of the engine you can see it on the right side of the air conditioner

Posted on Jun 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace exhaust gas recirculation valve


Betty, Check the attached EGR links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Exhaust Gas Recirculation Valve EGR Checking
Faulty EGR Valve Symptoms and EGR Valve Cleaning
EGR Valve Replacement Chevy Venture 3 4L Engine
Installing New EGR Valve


Mar 08, 2016 | 2003 Pontiac Aztek

1 Answer

Where is the expansion valve located on a '97 olds achieva?


If you do not know where it is,you do not
have it in your hand,thus you do not know
how dirty it is,it can be cleaned,no need to
replace it

What happens next-- you go to a repair shop
to have a vacuum pulled,leak tested & charge
the system

Are you about to polute the atmosphere, once
you open the system?

Did you have a compressor failure?

Aug 13, 2014 | Cars & Trucks

1 Answer

Need to replace a purge vent valve on 2006 cts cadillac where is it located and what does it look like


If you buy one from the dealership you will know what it looks like !
Replacing it , , , it can be located in a few locations but it is usually on the bulkhead under the hood.

Aug 26, 2012 | 2006 Cadillac CTS 3.6

1 Answer

How to replace the egr valve.


I want to change the EGR valve Myself in my 2003 Hyundai XG350L anyone know how to do that?

Apr 08, 2012 | 2002 Hyundai XG350

1 Answer

I need to know were to locate the pvc valve on a 1998 ford escort wagon 2.0L 4CYL automatic trans and and how do you change it ? THANK YOU


Its located on the valve cover on top of the engine.Pull it out disconnect hose from the pvc valve and replace

Aug 21, 2011 | 1999 Ford Escort

1 Answer

I cant find were the transmission control solenoid is located at and need to replace it


what kind of transmisson is this 4t40or 4t60 or 4t65 or 4L60 ..well most general motor solenoids are located on the the transmisson valve body . which means on a rear wheel drive the transmisson pan needs to be remove to gain access to the valve body . On a front wheel drive the valve body is located under the side cover on the transmisson . Now if i remember rigth there are 3 or 4 control solnoids . 1-2 shift 2-3 shift and a Tcc solnoid . you need to know which one to replace and what location are they on the valve body

Mar 06, 2011 | Chevrolet Impala Cars & Trucks

2 Answers

Where is the pcv valve at the engine ford explorer sport 99


PCV Basics
PCV stands for Positive Crankcase Ventilation.
All car engines have a PCV valve and it is located on top of the motor's valve cover. There is a vacuum line attached to it. It pulls out of the valve cover and if you shake it, you should hear a marble knocking inside it. If you shake it and don't hear anything, it's bad. It costs less than 5 bucks to replace.


Location
* 4.0L is located in the valve cover near the brake booster
* 5.0L is located behind the intake manifold (engine rear)

NOTE-Most people that are asking actually want to know not only where is it but also how do you get at it to replace it.

Often answers say that you need to dismantle the intake manifold to get to it.
This is a major and unnecessary approach, for example, on the 2000 Explorer with a 5.0 V8

Below is an additional suggestion on how to access a PCV valve on an 2000 5.0 V8 Explorer

The PCV valve is on the rear of the intake manifold (the intake manifold is also on top of the crankcase so PCV valve has direct access to crankcase)

To replace valve and/or its bushing:
  • Disconnect one battery terminal, unbolt/unplug the PCM cable (Powertrain Control Module connector located on the firewall) and firewall ground connection, depress underneath tab and slide the main cable connector (located to the right of PCM connector) off its mount.
  • Move the cables to the right and now you can easily reach down behind the intake manifold to the PCV valve
  • Service valve and its bushing if needed, reverse actions to reassemble
Hope this helped (remember comment and rated this). Good luck.

Apr 05, 2010 | 1998 Ford Explorer

1 Answer

Need to replace egr valve, but don't know where it is located


Your going to have lay on the engine and do the job blind, If you have a machanic's mirror that would help.
The EGR is located on the rear driver's side head. If you look at left side and to the rear of the plastic intake manifold, you will see and metal tube that makes a 90 degree turn. Just follow it to the rear of the engine and you'll find where the EGR valve.
Most guys remove the EGR tube and valve together, but you can take the Valve off on it's own. Here's the easy way but more work by taking the tube off with the EGR valve.
Remove the two 10 mm bolt that holds the EGR Valve to the head,and remove the Valve and tube together. The bolts go straight down from the top. Don't bother looking for then, your going to have to feel for them.
WHen your putting things back together, leave the the tube loose from the valve or your going to have a hard time putting the bolts back to the Valve to the head joint.
After your done putting everything back together, disconnect the battery for a few min and turn on the lights to charge down any power to clear any false codes. 
Good luck and hope this helps.

May 06, 2009 | 1999 Dodge Durango

1 Answer

Location of the pcv valve on my 04 kia rio


it should be right on top of your valve cover

Feb 28, 2009 | 2004 Kia Rio

3 Answers

My 2005 chevy trail blazer has code p0410 and i dont know what needs to be replaced provide that i know that it means secondary air injection system but i need to know the part that needs replacement


check the air pump on your trailblazer, make sure its clean inside and the hoses are properly fastened. also check to make sure it works properly by listening for it when you start the vehicle. if the air pump is working correctly, replace the position 1 o2 sensor meaning the sensor on the exhaust manifold. the air pump is located under the vehicle, inside the frame rail on the drivers side in front of the transfer case crossmember with 2 hoses connected to it.

Feb 21, 2009 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...