Question about 1999 Isuzu Trooper

4 Answers

Blinker problems with my 1999 Isuzu trooper

Hello, the blinkers and flashers are not working on my trooper. I have checked the fuses and they seem fine. They work every now and then, which makes me think something is loose somewhere, etc. Please let me know if you have any advice for me on this.

Thanks,

Posted by on

  • asolo56 Jul 11, 2008

    none of turn signals work on my 1998 Isuzu Trooper. I believe it is the flasher relay but can not find where it is located. Already checked both fuse boxes but no luck. Can anybody provide some help and guidance? Thanks!

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 46 Answers

In the fuse box there will be those black boxes, they are called relays, there will be one of them for the flasher. You could swap this with a known good one (AC or something) and see if that helps your problem

Posted on Jun 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my Trooper. After going through all the normal fuse/relay checks, I fixed it by pulling out the light bulb and cleaning the connection in the light socket. I haven't had a problem since. Maybe this will work for you.

Posted on Jun 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check the relay for the Tail lights. It's the same relay on my Isuzu Trooper 1995 for the Tail and Blinker Lights.

Posted on Jan 03, 2009

Please walk me install my blinker relay

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a diagram for how to find the flasher in a 1999 dodge stratus..it's not in the fuse boxes


Simple method without mystery:
  1. Turn blinker flashers on;
  2. Listen for clicking;
  3. Find source of clicking. It is the flasher. :)
NOTE: Emergency flashers and blinkers usually use a separate flasher unit, but one is close to the other. If your blinkers do not work but your emergency flashers do, find the emergency flasher unit by finding the source of clicking, then locate the blinker flasher nearby. They will ALWAYS be underneath the dashboard on the driver side.

May 11, 2015 | 1999 Dodge Stratus

1 Answer

Flasher repair


First, check your bulbs by starting up the vehicle and turning on the blinkers, then go around to check them. Also check to see if your emergency flasher work.
The fuses are either behind the glove box or under the dash on the driver's side.
Look on fixya, someone had the same problem back in April and several ideas were posted.
Good luck!

Jul 01, 2014 | 1995 Isuzu Rodeo

1 Answer

Turn signals blin continually


There is only a few things that can cause blinkers to blink continually, meaning if your saying they wont shut off, Normally it is the blinker flasher or a fuse. Sometimes it can be in the blinker switch itself. I first would check the flasher, and turn signl fuse. If the blinker stays on and does not flash, still can be bad flasher or fuse or a ground problem, You would then have to check the wires around area where there contact to the tail light blinkers and front blinkers. But first start as said earlier with checking flasher fuse, switch and fuse. Mike

Jan 16, 2012 | 1995 Cadillac DeVille

2 Answers

My left sinal light won't work on my 1999 Jeep Grand Cherokee Laredo. I don't know if it's a wiring problem or is it my switch? It's seems there are alot of Jeeps with the same problem.


check the fuse box located up the steering wheel and then read the map and it will show left blinker and the it should have replacement fuses and then take the fuse that is already in there for the left blinker and then put a replacement fuse in the place where you took the broken fuse out!!! thats the problem you seem to be having

Feb 18, 2010 | 1999 Jeep Grand Cherokee

1 Answer

TURN SIGNAL, BRAKE & HAZARD LIGHTS


No Turn Signal Operation (blinker)The turn signal lights in your car are a basic electrical system that controls the front and rear blinker lights to alert the intended direction of the vehicle. We have listed some of the most common problems and repair troubleshooting tips below:
Troubleshooting Procedure
To start troubleshooting this problem:
  • Turn the key to the on position (do not start engine)
  • Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's manual or an online repair manual
  • When a blinker flasher fails it can cause blinker lights to say on, not blink, or not go on at all. To test the blinker system flasher, remove the flasher unit and insert a jumper wire between the two terminals. If blinker stays on in both directions without blinking, replace the flasher. If you cannot find the location of the blinker flasher consult your owners manual or an online repair manual.
  • 1b7f814.jpg

Jul 09, 2009 | 1999 GMC Denali

1 Answer

99 Rodeo Right turn signal makes brake lights blink


TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Jan 02, 2009 | 1999 Isuzu Rodeo

Not finding what you are looking for?
1999 Isuzu Trooper Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...