Question about 2002 Mazda Protege

2 Answers

Keyless entry remote

I replaced the battery and the remote does not work. I was told that it needs to be program. (the dealer charges $35 for the programming)
help!

Posted by on

  • amluzc14 Jun 20, 2008

    sorry the protege is a protege5, mazda 2002

  • amluzc14 Jun 20, 2008

    did not work. I try twice. Thanks anyways.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 589 Answers

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks.

Posted on Jun 20, 2008

It worked for me...thanks!

Posted on Sep 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My keyless entry does not work anymore


Step by Step Solution:
1. Check the battery in your Key Fob/Remote, Replace?
2. If after replacing battery and still does not work then may have lost programming, or bad keyless entry module.
3. May need to take to dealer to have programmed or keyless entry module replaced.

Sep 15, 2010 | 1995 Buick Regal

1 Answer

Keyless Entry For 2003 Grand Am 2.2L 5 speed manual


the mechanic should be able to let you know what is the problem and what it takes to get it to work.
if the car was not equipted with the keyless entry and the dealer tried to sell you the remotes then you need to return the remotes.
by running the VIN on their computer, the dealer can tell you if you have it or not.
if I was you, I would just get a remote starting system from best buy or sam's then either have them install or have a good mechanic to install the system. it may be cheaper too!

Mar 22, 2010 | 2003 Pontiac Grand Am

2 Answers

Purchased used. have remote for keyless remote.


That you need to take it to a car stereo dealer that install NEW keyless entry's...Sorry, thats the easiest way to fix this issue.

Jun 14, 2009 | 1999 GMC Jimmy

1 Answer

How do i program remote keyless entry? I replaced the battery and keyless entry quit working,


You don't normally program a keyless entry, that's done for you by the technicians that install that. If the replaced battery doesn't solve the problem, take the battery and the remote to the techies that installed it.

Mar 27, 2009 | 2003 Chevrolet Monte Carlo

1 Answer

Keyless Entry for 2003 Grand Am


This is a Dealer Option and they all Charge Different Prices. I have heard of Prices from 50.00 to 175.00 depending on what Options are on the Car.

Jan 23, 2009 | 2003 Pontiac Grand Am

1 Answer

1997 Honda Civic EX Keyless entry programming


If you still have the factory radio, there is a way to split the power wire for the factory radio to the aftermarket radio. All you will need are the power and ground for your aftermarket radio, so the rest of the wires should be untouched on the plug for the factory radio. You can simply re-install the radio within the dash and retain the keyless entry as well as restoring your dome light function. Here's a PDF of some instructions. If you did not keep the radio, I would suggest looking online or ins ome junk yards, because it is needed. www.installdr.com/InstallDocs/Honda/PDF/466013.pdf

Jan 08, 2009 | 1998 Honda Civic

2 Answers

Lexus 1994 LS400 remote key won't work


Make sure you have inserted battery correctly in key. If it doesn't work on one side, flip it on the other. Should work..

Oct 24, 2008 | 1994 Lexus LS 400

6 Answers

Keyless entry stopped working on 05 cobalt now i have to unlock door with the key and when i do that the alarm goes off. Help


Lock all the doors from the inside (with all the doors closed), unlock your driver's door by manually lifting the lock, then press it back down after you are out - this will prevent the alarm from sounding when you use the key to unlock the door.

Aug 02, 2008 | 2007 Chevrolet Cobalt Coupe

Not finding what you are looking for?
2002 Mazda Protege Logo

1,116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...