Question about 1995 Mitsubishi Diamante

2 Answers

Abs fault Hi there I have a problem with a 1996 Mitsubishi Diamante' s abs system. The abs light intermtintly comes on, I scanned for codes and got fault code 36. ST-N short. Can't find information anywhere on what this means. I contacted a local Mitsubishi dealer and they said they have no record of that code. So just wondering if you are able to point me in the right direction.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 61 Answers

Sounds like a steering wheel sensor. Call Mitsubishi back and tell them that, or try a different dealer. Sensor detects the angle of the steering wheel when determining ABS operation parameters (I think)...

Posted on Jun 20, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 720 Answers

2-digit codes are OBD1 version:

Engine Code # 32 = Manifold Pressure Sensor
ABS Code # 32 = Front left wheel speed sensor circuit

Posted on Jun 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the anti lock light on dash board not turn off Mitsubishi Diamante 2004 station wagon Australian Built please.


When the ABS light stays on it means that the computer control module has sensed a fault and it has turned off the ABS and turned the light on to alert you to the problem. You need it tested for fault codes with a special scan tool.

Sep 26, 2016 | 2004 Mitsubishi Diamante

1 Answer

ABS Brake light and check Engine soon light Won't shut off on my 2003 Diamante LS Mitsubishi how can I shut it off


have the fault codes read and fix what is shown up
could be a broken wire at one of the wheel sensors or something more serious

Apr 20, 2016 | 2003 Mitsubishi Diamante LS

1 Answer

The battery light keeps coming on sporadically


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS, TPMS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System

Nov 02, 2012 | 1996 Ford Taurus

1 Answer

My ABS light showin my my dash board and it was scanned my mitsubishi. Presently the light is still showing and when I break, I hear some noise as if the break pad is pad. I currently have new beak pad...


Hi,

New brake pads require 'wearing in' and may make a scraping sound for the first 50km or so.

Re ABS

First, I suggest you remove the PCM "Fuse" (in the main junction box, under bonnet) for 10secs, then re-insert. If you cannot find fuse, then disconnect NEG battery cable for 10secs. This will reset your PCM.

Start engine and allow to idle for 15mins (this allows the PCM to re-learn settings).

Drive car a short distance to determine if ABS light comes back on. If ABS light does come back on, then have the PCM scanned for fault codes. This will identify which ABS component is causing the (warning light) problem.

If light remains off (and the pads are worn in), but you still have scraping noise, then something else is causing this problem and will require further investigation.


Cheers,

Jun 15, 2011 | 2000 Mitsubishi Montero Sport

2 Answers

Abs light and (tcl off) light keep coming up when driving my friend is a auto sparky and plugged his diagnostic computer in and it came up with abs fault code 36 what does this mean and how can i fix it....


Sensor circuit high in other word it is disconnected or is internally disconected check each and all ABS and see if they are plug on now once the light come on it turns off the traction control or (TLC) you might also have ABS sensor contamination.You ever get a magnet and run it in the dirt and get all that hairy iron well that is just what happened to you
abs sensor acces it and wipe them clean of all that hairy looking iron on it then your ready for no fault ABS till it grow hairy iron on it

Apr 22, 2011 | Mitsubishi Diamante Cars & Trucks

2 Answers

How do i make the check engine light go off in my 2003 mitsubishi diamante ?


Their is a fault with the electronics on one of the vehicles electrical circuits, or one of the sensors is activated and reading a mechanical fault. This will bring up the malfunction indicator light, you will need to see a dealer with an electronics reader to find out what this fault code is meaning. Some dealers will read it for free, and then charge for the repair from that point. If it was a false code they will also reset it for free, althogh i have heard some dealers can charge up to $100. OR you can even hire a fault code reader from an automotive parts store and read it yourself. If it is an orange light, just get it to a dealer when you are able to. If it is a red light, avoid driving it and get to a dealer ASAP. this will prevent any further possible electrical damage and any other mechanical damage from what ever the fault maybe. Also, their is a safety issue if the fault is relating to a safety feature of the car. It is hard to pin point an exact fault and exact cost. Cost will vary with the type of fault. Once repaired, the dealer will be able to reset the light for you. Goodluck

Jan 25, 2011 | 2003 Mitsubishi Diamante

1 Answer

Wanting to find out what a warning light means any sites that show what the warning lights mean on a 1999 mitsubishi diamante


When the warning light comes on, your car generates an error code which is helped to diagnose the problem.

Got a local mechanic or most any auto parts stores (usually free) and ask them to scan your OBD2 port.

Their scanner will download the error code and then they can tell you what the code means and start you in the right direction to make repairs.

Nov 28, 2009 | 1992 Mitsubishi Diamante

1 Answer

Where is the plug for 97 mit. mirage to plug in the computer diagno. so i can read the code


Hi there,

The 16pin Diagnostic plug is situated inside the vehicle, usually under the dash, above the knee of the driver (on either side of vehicle).

This is what it looks like:

35d12b0.gif
If you do not have the appropriate scanner, you can retrieve the computer diagnostics by the following process:

1) turn key 'off'
2) connect pins 1 & 4 of the connector (using a suitable jumper wire)
3) turn key to 'on' (do not run engine)
4) any fault codes present, will flash the appropriate warning light on the instrument cluster. E.g. if you have an ABS fault, the ABS warning light will flash. If you have an EFI issue, the Engine Light will flash etc.


Cheers,

Oct 09, 2009 | 1997 Mitsubishi Diamante

2 Answers

ABS and Trac off light coming on during drive


Usually that means either the ABS wheel sensors are defective, or the vehicule speed sensor in the transmission is defective. You simply need to find out which one, and getting the codes out of the OBD system will help find out which one usually. To do so you will need to ask someone with a code reader because the old GM jumper trick to have the check engine light flash you the code only work with older OBD-1 systems, and your 2000 model has and OBD-2 system which was standardised by government law at arround 1996.

Jul 13, 2009 | 2000 Pontiac Bonneville

1 Answer

Abs light


The light is on because there is a fault in the ABS system, while the light is on the system is disabled, as soon as the ABS problem that turned the light on is fixed the light will go out, have a self test run of the ABS control module for a trouble code, this will steer you in the right direction to fix the issue.

Oct 11, 2008 | 1992 Mitsubishi Diamante

Not finding what you are looking for?
1995 Mitsubishi Diamante Logo

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...