Question about 1997 Nissan Pickup

1 Answer

Key Broke for Ignition Need to Bypass until I can Get parts Any Ideas?

Just cant spend the 200 bucks for the part I need Can anyone help me with a diagram or suggestion that can Help me bypass Basicly Need to set up a hot wire situation just dont want it to be quite that Cheesy Any Takers?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 726 Answers

Ok im not a thief but i hve done this as a joke stole mummys car on the ignition barrel at the back when the key is turned the barrel turns a lug that turns in a plastic bit u unscrew that and u can stick a screw driver in it and turn it manually no need to cut any wires here is a photo of the plastic bit http://wiki.r31skylineclub.com/images/9/97/Ibfcompare.jpg amnd here is a photo with the plastic bit off with the lug http://www.noelsautoparts.com.au/pics/Nice%20Products/nib40_small.gif if u have any more trobles just write back and ill help but do that it will work

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Someone tried to steal my 2002 monte broke ignition. security light comes on cant start car can i disable it to get the car started


You have two choices, you can purchase a new ignition lock cylinder (costs between 150-200 at most any part store) and take it to a lock smith with your original key to have the pins changed to where your key operates the new lock cylinder. And then have it changed out. Or you can take your car to a mobile audio store that installs aftermarket remote start systems and have them bypass the PassLock anti theft system. Cost should be about the same either way, may be just a but cheaper for the bypass, but then your car will be more vulnerable. If the PassLock had been bypassed when they attempted to steal it, it might be gone right now.

May 25, 2016 | Cars & Trucks

1 Answer

Do you bypass or take out the antitheft system the same way in all ford mustang if not need to know how on 97 year lost key and don't have the money to get new one and need to move where it is at asap


You can't take out or bypass the system. The alarm and immobiliser are there to stop exactly what you want to do.

There is a chip in the key and a chip in the ignition lock. Once both are in close proximity, they send a message to the car's computer and the computer releases power to the ignition. Without any one of those parts, the immobiliser comes into operation to stop anyone moving the vehicle.

The only thing you can do is tow it until you get the key.

Jan 29, 2016 | Ford Cars & Trucks

2 Answers

Lost 1995 keys to 1995 cadillac eldorado. How can i obtain w/o spending 100's


This car key has the VATS security chip in it. These keys are at least 100 bucks. You can rip into the ignition part and start the car with the wires, but it wont work untill you bypass the SECURITY system. Here is a link about the security. Gives you the 15 possible key chip codes and links to help bypass this system.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jun 06, 2011 | 1995 Cadillac Eldorado

2 Answers

No power to ignition


It is an automated ignition

Jan 23, 2011 | 1999 Pontiac Sunfire

1 Answer

When you try to start my 99 Alero the security light starts blinking and it will not start. The light blinks for about ten to twelve minutes before going off.


The Problem is your VATS security system. I just fixed this in my 96 regal 3 days ago. You can go the cheap way, and bypass the key. (link #1) or spend 200 bucks and rip that whole garbage system out of your car. (link 2) I bypassed my key, worked for about a year till the computer part started failing. then i just did a full rip out.


http://vats.likeabigdog.com/

http://newrockies.ca?ap_id=judd0081

Jan 10, 2011 | Oldsmobile Alero Cars & Trucks

2 Answers

My key is stuck in ignition and wont turn or come out do you no what is wrong?


your going to need to replace the igniton or the electrical switch part in the back of switch may have broke apart and jammed it,take it apart and seeif the key turns once the switch part is off the key part,(electric ignition switch is removed from the cylinder lock).

Mar 04, 2010 | 1998 Saturn SL

1 Answer

Key broke off in the key ignition switch and i cant get it out any ideas?


call a lock smith

if ignition turns turn it insert a pin or similar object into hole in botom of ignition and remove it

once removed take to lock smith have key removed and re cut
if it doesnt turn call lock smith and have them remove it and repair it lock smith will charge 100- 150 with mobile

dealer wont do mobile so tow 50 bucks then dealer charges 175 - 250 to remove and replace ignition

Jan 22, 2010 | 1990 Nissan 300ZX

1 Answer

Ignition switch stuck on 2001 chevy impala


sounds like stuck pins

insert key tap the end of key with malet untill it turns
once it turns drive to lock smith have them remove and repair the ignition cost will be 50 - 75 bucks verses dealer at 200 bucks

Jan 03, 2010 | 2001 Chevrolet Impala

1 Answer

2002 grand prix...key broke in ignition.


You may get it out using a pick, or a paperclip with a very small bend on the end. If you can't get it to come out from there, you may need to replace the ignition tumbler. Let me know, and I'll give you the steps if necessary.

May 23, 2009 | 1988 Pontiac Grand Prix

Not finding what you are looking for?
1997 Nissan Pickup Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...