Question about 1998 Chrysler Sebring

1 Answer

Blinker problem I own a 1998 chrysler sebring lxi and the right blinker blinks all the time. It is not a fast blink and the bulb is not blown.So I pulled the fuse and of course now I have no blinkers. I tried to change the buld like chrysler suggested but that did not work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I would suggest an internally shorted multifunction switch. It should not be very expensive at a dealer and really easy to replace.
MULTI-FUNCTION SWITCH REMOVAL

  1. Disconnect battery negative cable.
  2. Remove the upper steering column cover. Refer to steering column cover removal procedures below.
  3. Remove multi-function switch mounting screws Multi-Function Switch
  4. Disconnect wire connectors. Lift the switch straight up to remove.
INSTALLATION For installation, reverse the above procedures.
  1. Tighten multi-function switch to column retaining screws to 2.3 N·m (20 in. lbs.) torque.
  2. Tighten steering column cover retaining screws to 2 N·m (17 in. lbs.) torque.

Posted on Jun 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Right rear turn signal blinker blinks very fast


Your right rear turn signal bulb is blown.Replace the bulb and the fast blinking will stop.

Nov 26, 2011 | 1999 GMC Suburban

1 Answer

All my blinkers work but they all blink really fast


Usually, when they blink real fast, the bulb is blown.

Feb 16, 2011 | 1998 Dodge Dakota

3 Answers

My rear brake light is not working, nor is my blinker at the back right. When I put the right turn signal on it blinks really fast, faster than normal, and the front blinker works. I have replaced both...


Normally with the blinker blinking really fast, it's telling you that one of the bulb is blown, front or rear signals. Check your fuse, and fuse relay to see if it would fix the promblem

Jan 23, 2011 | Chevrolet K3500 Cars & Trucks

1 Answer

Left blinker blinks faster than the right. which the back left blinker does not work and front left blinks really fast.Right blinker works normal?


Flasher relays relies on bulb wattage for the speed of the blink.
You probably just have a blown bulb in the left rear blinker.:)

Oct 15, 2009 | 2006 Ford F-150

1 Answer

Turn signals will not work


this happened to my car too. the turn signals and the hazards werent working so i replaced the relay and that fixed the whole problem

Jul 29, 2009 | 1998 Chrysler Sebring

1 Answer

Blinks Fast, and Light Stays On.


check the relay and blown out bulbs will cause the lights to blink fast or some to stay on. one bad bulb will cause the problems.

Jul 14, 2009 | 2002 Chevrolet Cavalier Coupe

Not finding what you are looking for?
1998 Chrysler Sebring Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...