Question about 2001 Hyundai Accent

1 Answer

Check engine light was on then went off now back onagain

Check engine light was on when i got car went off after i got new exhaust put on now back on again

Posted by on

  • Anonymous Jun 21, 2008

    Same problem with check light. Took it to hyundai garage who charged me £73 for diagnosing code P1128. Cleaned the sensor then sent me away. Light came on same day now saying it's the module and will cost £500 to replace!!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers

Q1: What to do if my "Check Engine" light is on?
A1: The simplest way is to visit your local dealer for proper diagnostic. They have all the equipment and information needed to correct the problem. The problem might even be covered by the manufacturers warranty and possibly repaired free of charge.

Q2: Is it safe to drive if my "Check Engine" light is on?
A2: It really depends what code is stored and what caused it. In worst cases driving with "Check engine" light may cause more damage to the vehicle. A car may even stall while driving. If your check engine light came on, I'd certainly recommend to visit your dealer or a mechanic as soon as possible, just to be on a safe side. If the Check Engine light is flashing, this means that the engine computer (ECM) has detected that your engine is misfiring, which could damage your catalytic converter. Have the your vehicle inspected as soon as possible.

Posted on Jun 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Numerous Questions


One suggestion I have is that each of the new type of engine's have an O2 sensor which is part of the exhaust. This is used by the computer to measure the amount of O2 in the exhaust gasses in the exhaust.
Try using this url link

Dodge durango o2 sensor bank 1 location

if it does not connect select the whole link start a new tab and paste the link to the URL address bar.

2004 durango exhaust oxygen sensor Google Search

some images of the exhaust system.

Mopar Parts Worldwide Mopar Parts for Dodge Chrysler Jeep

some other information and suppliers.

Mar 04, 2014 | Dodge Durango Cars & Trucks

1 Answer

Lifters/car not starting


Do you have the 2.2 liter Ecotec 4-cylinder engine, the 3.5 liter V6, or the 3.9 liter V6 engine? If you have the 2.2 liter engine, there may be a camshaft/timing chain issue if you skipped a tooth when you put the chain back on the cams. If it's a 3.5 or a 3.9 liter V6, you may have incorrectly installed the push rods back into the engine. 3.5 liter intake push rods are approx 5 3/4" long, while the exhaust push rods are approx 6" long.
The 3.9 liter intake push rods are approx 5.81" long, while the exhaust push rods are approx 6.1" long. If you mix the two lengths up when you put them back in the engine, you're going to have problems.

Oct 19, 2013 | 2006 Chevrolet Malibu

1 Answer

My SERVICE ENGINE SOON light came onAGAIN!


Disconnecting the battery should reset it but I would bet that the light will come back on. I would have a auto parts store read the error code for you. They can also reset it. There are two o2 sensors on this car one on the manifold and one down stream from the converter. If you are getting an o2 error code it could also be the converter.

Apr 14, 2013 | 1996 Saturn SL

1 Answer

My "Check Engine Light" has gone on periodically


From what you are describing i feel you might be having an bad EGR valve..It only causes the rough idle and shaking and fuel smell in exhaust..It can also cause back firing. Does it happen? Also do you hear any popping noise from exhaust?

Nov 09, 2010 | 2001 Saab 9-3

1 Answer

Check engine light on, replaced oxygen sensor before catalyst,


  • Water or corrosion in the connector
  • Loose terminals in the connector
  • Wiring burnt on exhaust components
  • Open or short in the wiring due to rubbing on engine components
  • Holes in exhaust allowing unmetered oxygen into exhaust system
  • Unmetered vacuum leak at the engine
  • Bad o2 sensor
  • Bad PCM

Jun 18, 2010 | 1999 Lexus RX 300

1 Answer

Check Engine light


the computor sees one of the engine sensors out of range if you take the car to advanced auto parts or simmular place they can pull the codes then write back with codes and we can help you figure the problem out

Oct 07, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
2001 Hyundai Accent Logo

Related Topics:

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...