Question about 2001 GMC Denali

1 Answer

Dragging Our 2001 yukon denali feels like it drags and pops when we turn sharp or into a parking spot.

Posted by on

  • Anonymous Mar 23, 2014

    I get a vibration and my Yukon feels like it skips forward when making sharp turns.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Easy fixes

1- get a can of mass air flow sensor cleaning solution and spray it on the sensor. The sensor is in line right after the air filter. It is in the tube that is directly connected to the box the air filter is in. You can see a wire connector going to it. Easy to open up, look inside and you will see some thin wires going across with a few nodes on them. Spray these clean. re-assemble.

2- get some fuel injector cleaner and remove the tube where it goes onto the manifold.Same tube air sensor is in, except at other end. Spray some cleaner in and run the engine. I am not a pro and I get scared there will be a fire so I reassemble the entire tube after spraying and before turning on the engine. I repeat it a few times.

#1 helps the most and you will be sooooo surprised how inexpensively you solved a seemingly major engine problem. I had the same thing when turning in a parking lot, slow turning. Problem gone in 10 minutes work!!!

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I drive 2002 yukon denali and was making a sharp turn when the front wheels lock. They wont turn, i finally got them to turn enough to back up out of the way. It looks like it has enough ps fluid


a broken CV or UJ on a drive shaft can cause the steering to lock up , jack up front end and check for damage to the drive shaft's rubber covers to the drive joints, push/pull wheels in and out , as in steering motion while spinning wheel and feel if there is anything restricting a smoth movement , hope this helps

Jun 26, 2016 | 2002 GMC Yukon Denali

1 Answer

The parking lights on our 2001 GMC Yukon XL stay on after turning the vehicle off. This drains the battery down to prevent starting again. What is wrong?


Hi, there is a park relay in middle of the interior relay box under the dash to the left of the steering column. This is shown on page 6-61 of your owner's manual (http://www.extendedgmwarranty.com/owners-manual/gmc/2001-GMC-Yukon-Denali.pdf)
With the battery connected, pull out the relay and push it back in. If it clicks when you do this, the headlight switch is bad. If it doesn't click, the relay is bad. Try swapping the relay with another similar relay, such as the horn or A/C relay. If that solves the problem you need a relay. If not, you need a switch. Please let me know if you have any questions, and thanks for using FixYa.

jturcotte_1301.gif

Mar 24, 2011 | 2001 GMC Yukon Denali

2 Answers

After driving for 30 minutes or more or 25 miles,


Is this an all-wheel drive or 4 wheel drive. If it is it sound like you have the vehicle in 4 wheel drive.

May 22, 2010 | 2001 GMC Yukon Denali

1 Answer

2001 Yukon Denali: The security light came on my 1999 Yukon Denali ye...


The security system (Passlock) is having problems, it's typical on those trucks. You can find a great write-up here: http://newrockies.ca , it was the only thing that saved my Park Avenue.

May 16, 2010 | 2001 GMC Yukon Denali

1 Answer

Can't get rear parking brake off 04 Yukon Denali XL


You are going to have to pry it over the axle on one side of the park brake shoe assembly with either a pry bar or screwdriver. then just pop the new one back over the axle in the same way. Hope this helps

Aug 05, 2009 | 2006 GMC Yukon Denali

1 Answer

Dragging back tires


sounds like the park brake is applied
or seized on

May 19, 2009 | 2007 Chevrolet Avalanche LTZ

1 Answer

Popping sound


Make sure the shocks are reattached at both ends; also if it has coil springs vs torsion bars, they may be twisting upon spring movement. if not sure, you can squirt some oil on the bottom of the coil springs to test. if the popping stops then the springs may need repositioning (twisting to the proper spots) or get an after market pad to place underneath the spring where it contacts the lower "a"frame. good luck

Dec 26, 2008 | 2003 GMC Yukon Denali

3 Answers

2002-2006 Denali front bumper fit on a 2001-2006 Yukon


Yup - you may need to get the grilles and such as well...

May 18, 2008 | 2001 GMC Denali

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...