On most GM cars, there is a C-clip that holds the handle to the window regulator. Most parts stores sell a tool that allows you to remove the clip. The clip is on the inside of the handle at the shaft.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Evaporative Emission Vent System Performance. the emissions system on these ventures suck! good luck. It basically means the fumes aren't going where they are supposed to be going and if you live in a county or state that requires emissions testing, it will not pass until you get it fixed. other than that you probably wont see any other problems, you might smell gas but like i said those are just fumes not going to the right place.
could be the neutral switch try and crank it while moving the shifter around also try and put power to the small terminal on the starter that will tell you if the starter is bad or the wiring or switches
disconnect the fuel line at the fuel rail and have someone try to start the car if you get fuel coming out then you know the pump is fuctioning and it is a injector problem or fuel pressure regulator issue, or possibly something totally unrelated. if you do not get fuel check the fuel pump relay and fuse.
Good day, if you can hear a pulsating buzz coming from the wiper motor, you probably have a grounding problem. If you do a fixya search for 2005 Chevrolet Tahoe, then at bottom of page under how tos I have a tip to fix rear wiper. If Chevrolet used that same wiper motor on your car, maybe it will fix yours too. Since it is a different model removal of panels to get wiper motor access will be different, then connect a wire from wiper motor frame to a good chassis ground. Good luck.
remove window switch assembly. you will see a 7mm screw behind it remove that screw and one rt under grab handle. remove bezel around door handle and top panel that is triangle shaped by mirror. once all this is done just lift up on panel as it has hooks that hold it on.