Question about 2007 Chevrolet Uplander LS Minivan

3 Answers

Wiring diagram I need to know where i plug the trailer brake module wire. There's three wire on the brake pedal swith, witch is the good one. If someone can provide me a wiring diagram it will be perfect.

Posted by on

  • 2 more comments 
  • Jean-philippe Fradette
    Jean-philippe Fradette Jun 19, 2008

    Thanks but too expensive for only one info.

  • Anonymous Mar 22, 2014

    it will start manually but the dont know where the wires go

  • Anonymous Mar 25, 2014

    hooking up brake wire

  • Anonymous Mar 31, 2014

    installing a goodwrech replacement 93-700R transmisson into a 86 need the wiring diagram...just need to know how to wire up the hot wires for shifting

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

Helpful Wiring Information when hard wiring your brake control:
Run two wires to the battery:
White - Ground
Black - Power
Blue - Run to Electric Brakes at the Rear Plug
Red - Run to cold side of brake switch off of the brake pedal (using a test light to find the cold side)
Note: Always wire the red wire to the heaviest gauge wire when testing cold side of brake switch.

You can view more info here. http://store.drawtite.com/brakecontrols.html

Posted on Nov 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

Try this site: http://www.alldatadiy.com/?gclid=CIjxn4iBgZQCFQWxsgod_E75Ww

You should be able to find an answer there.

Posted on Jun 19, 2008

  • InVision_A_V Jun 19, 2008

    There are other place that you can find free wiring diagrams you just have to google search "free automotive wiring diagrams" to find a real one. I know they are out there but I don't have time to look right now.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are free diagrams at AutoZone.com

Posted on Sep 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have installed a brake controller and I cant find the brake switch which I must tie into to make the trailer brakes work. I think I found the switch but the wires seem awfully thin.


Hi, if you pull the connector off the switch and the brake lights no longer work, you have the right wires. These wires do not carry the current for the trailer brakes. You will have another wire from the controller to the trailer plug for those. That wire is usually 14 gauge or larger--follow the directions to get the proper size. You are hooking in to the brake switch wire just so the controller knows when you are stepping on the pedal. Make sure you connect to the wire that does not have power except when you step on the pedal. I would tell you the color, but I do not have the diagram. Use a 12 volt test light to see which terminal in the connector is hot. The wire you want is the other one. Please let me know if you have more questions, and thanks for using FixYa.

Jun 13, 2011 | 2006 Pontiac Montana SV6

1 Answer

I have a 2001 F150 and am trying to find out where the factory installed plug in is for the brake controller wiring. I have the brake controller and the instructions say to read the truck owners manual...


Hi. There is a grey plug with 6 wires right behind your OBDII diagnostic port on the lower dash board above your accelerator pedal.

The color of the wires on the plug are blue, green, red, white and brown. The wires are as follows:
Blue....electric trailer brake feed
Green....brake pedal switch
Red...12v postitive...always hot
White....ground
Brown....interior vehicle illumination (not used)

The factory wire harness that you will need to attach your brake controller will plug right into this plug. The factory wires are colored the same as above.

After-market and brake conroller wires are colored as follows:
Blue....electric trailer brake feed
Red.....brake pedal switch
White....ground
Black....12v positive

Sep 01, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Trailer wires what is what??


On trailer plug, white is ground,yellow is left turn signal,green is right turn signal & brown is tailights.

Jun 08, 2010 | 2001 Ford Focus

2 Answers

I hooked up my trailer lights everything works but my taillight


If you have access to a digital multimeter or test light, check if there is power going to the plug, if there is then maybe the trailer plug and the truck plug dont match up

Jul 16, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

I need a wiring diagram for a 2001 ford f150 trailer hitch plug in. i got a new heavy duty trailer connector and i need to know the color code of the wires


Hey Bryan

I've got them for Six and Four wire plugs

Six wire plugs:

Horse, stock or utility trailers:
White = Ground - GD
Yellow = Left turn/Brake -LT
Green = Right turn Brake -RT
Brown = Tail and clearance lights - TM
Red or Black (not both) = Battery, aux power - A
Blue = Electric Brakes - S

Recreational Vehicle: (color, use, plug mark)
White = Ground - GD
Yellow = Not used -
Brown = Right turn Brake - RT
Green = Tail and clearance lights -TM
Black = Battery, aux power - A
Red = Left turn/Brake - LT
Blue = Electric Brakes - S


Four wire plugs:
White = Ground
Yellow = Left turn/Brake
Green = Right turn Brake
Brown = Tail and clearance lights


Ground should be 10ga.
Others 14 ga

Best regards
Mike

May 02, 2009 | 2001 Ford F150 Styleside SuperCrew

2 Answers

Wiring diagram or fuse box diagram-2007 GMC Envoy Denali


Hi there;

Here is the wiring diagram for the trailer wiring for your truck.
22593cd.jpg
Hope this helps
Farrout!

Mar 07, 2009 | 2007 GMC Envoy Denali

2 Answers

How do you rewire a trailer


Are you putting on a 4 wire flat connector? Trailer Wiring

4 Flat Small
Brown = Tail Lights
Green = Right Turn Signal & Brake Light
White = Ground
Yellow = Left Turn Signal & Brake Light

Feb 01, 2009 | 1995 Ford Escort

1 Answer

I need to add a trailer light plug to my truck. i need the tail light wiring diagram for a 2005 toyota tacoma pickup.


The diagram will do you no good it you do not have amber turn signals on your trailer. What you need is a "black box" that, when wired correctly, interprets the amber turn signal on the truck into a pulsed flash to the red brake lamp on the trailer. If the trailer does not have amber turn signals, it is impossible to wire a harness with a diagram. Sorry.

Aug 08, 2008 | 1995 Toyota Tacoma

Not finding what you are looking for?
2007 Chevrolet Uplander LS Minivan Logo

1,561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...