The fuel filter is in the tank, you need to take the fuel pump module out to get to it, once its out youy can wash the sock filter on the end of the pump out with petrol and replace the main filter (metal can in top part of module). Filter is available from the dealer.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Fuel Filter is located:
FUEL FILTER
1992 Mercury Topaz 3.0L FI 6cyl
FUEL FILTER
1992 Mercury Topaz 2.3L EFI 4cyl
The Fuel Filter is located:
Under hood, passenger side, upper engine area, mounted in fuel line
The Fuel Filter is located:
Under hood, passenger side, upper engine area, mounted in fuel line
Before servicing the vehicle, refer to the Precautions Section.
NOTE
The fuel filter is located underneath the vehicle in the area of the rear suspension.
Relieve the fuel system pressure.
Raise the vehicle.
NOTE
To remove the lines, press the quick-release tabs on the connectors.
Fuel filterFuel filter and bracket assemblyFuel filter linesEVAP vapor line
Start the engine and check for leaks.
Before servicing the vehicle, refer to the Precautions Section.
NOTE
The fuel filter is located underneath the vehicle in the area of the rear suspension.
Relieve the fuel system pressure.
Raise the vehicle.
NOTE
To remove the lines, press the quick-release tabs on the connectors.
Remove the fuel filter bolt and remove it from the bracket.
Fig. Location of fuel filter and lines.
To install:
Position the fuel filter into the bracket. Ensure the fuel flow direction is properly aligned.
Install and tighten the fuel pump bracket bolt.
Lubricate the fuel tube fittings with clean engine oil. Align the fuel tube fittings and press together until a click is heard and then pull on the fittings to make sure they are fully engaged.
NOTE: The fuel filter is located underneath the vehicle in the area of the rear suspension.
Relieve the fuel system pressure by removing the fuel pump fuse from the battery junction box, starting the engine, and allowing the engine to idle until it stalls.
Raise the vehicle.
NOTE
To remove the lines, press the quick-release tabs on the connectors.
The fuel filter for your vehicle is located on the Fuel Pump Unit, which is located in the vehicle fuel tank. The Fuel Pump Unit must be removed from the top of the fuel tank in order to replace the Fuel Filter.
The fuel filter (2) is located under the rear of the car, behind the fuel tank. There is no service interval for fuel filter replacement. Replacement is required only if the fuel filter becomes restricted.
All of the fuel filters with exception of the V6 Odyssey models are located on the vehicle's firewall, in line with the fuel line feeding the engine's fuel rail. The fuel filter on the 3.5L V6 Odyssey is located in the fuel tank and requires fuel pump removal to access. Fuel filters located on the firewall should be replaced if the fuel filter exhibits signs of seepage or corrosion. Always replace a fuel filter and its sealing washers if the fuel system has become contaminated, if the fuel system fuel pressure drops below specification prior to replacing the fuel pump, or whenever the fuel pump is replaced.
×