Question about 1983 Chevrolet Malibu

1 Answer

Remove and install car stereo 2000 Chevy Mailbu

My daughter and I are going to take our the factory stereo and install a CD Stereo. What do we need to have on hand and what pits falls or secrets do we need to know to do a decent job the first.
Pictures would also be great if you have any.

Lisa in Texas

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,010 Answers

DO NOT take it out until you are completely sure on what to do...i have an 02 malibu and removed the radio on the 29th of august and now my car still doesn't run...it's going to the chevy garage at the end of the week...i'll get an update...let me know if u figure something out!

Well I will tell you because I taken Mine out about 6 times and nothing has ever happened. Take the plastic around the ignition switch off be careful not to brake plastic, then prey the plastic away from radio then u while see the bolts to take radio out. Before you do anything like this though UNHOOK THE BATTERY

Posted on Jun 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i hook up a parakeet model number PWM 16 to my factory stereo in a 98 Ford Expedition


About 3,970 results (0.89 seconds) Search Results

    Ford Bluetooth® Wiring Harness - Crutchfield

    www.crutchfield.com/.../Ford-Bluetooth-Wiring-...

    Crutchfield Corporation
    Rating: 4.5 - ‎16 reviews - ‎$19.99 - ‎In stock
    Reinstall the factory radio and mount the Bluetooth kit, and you're ready to go. ... 16Reviews ... harness so that I could hook up an aftermarket amp to my factory radio.... works like it's suppose to. says it doesn't work on an 09 Escape but had no .... I purchased this harness to install a parrot ck3100 in my 07 Ford Edge.Missing: pwm

    70-5521 wiring harness for ford with 6 CD premium sub amp ...

    ? 4:30
    https://www.youtube.com/watch?v=0jqNafnki0o
    Aug 9, 2013 - Uploaded by codieraji
    Metra 70-5521 Radio Wiring Harness for Ford 03-Up Amp FordPremium stereo radio 6 CD changer with sub amp inputs. ...16:47. How to wire an aftermarket radio / I Demo install with metra harness and antenna ... How to hook up stock amp/sub to aftermarket head unit "ford sport trac" - Duration: 3:01. Pat.Missing: parakeet ‎pwm ‎98

    Car Stereo Wire Harnesses - Radio Wires for all Car Audio ...

    www.installer.com/main.php?page=harness
    Car Stereo Wire Harnesses - Car Stereo Installation Wiring - Stereo Harness ... If you

Feb 09, 2016 | Ford Cars & Trucks

2 Answers

I have a 1996 Nissan Maxima with a factory Bose CD player / cassette and radio and it will not turn on what's the solution


Maxima Bose Radio ' eBay

www.ebay.com/bhp/maxima-bose-radio

eBay1995 1996 1999 Nissan Maxima Pathfinder Infiniti J30 Radio BOSE CD tape Player ...Will fit and work in these with BOSE audio package only:1995 - 1999 NISSAN .... 2006Nissan Maxima OEM Bose Cassette & 6 Disc CD Player Radio CR13B ...DESCRIPTION Unit is missing some bottons, 3 of them, this item has NOT ...

Nissan Maxima Bose Stereo ' eBay

www.ebay.com/bhp/nissan-maxima-bose-stereo

eBayWill fit and work in these with BOSE audio package only:1995 - 1999 ... 1996 - 2000 NISSAN Pathfinder. 2004 2005 2006 NISSAN MAXIMA FACTORY BOSE STEREO 6 DISC ... Factory NISSAN INFINITI BOSE Radio, Tape, and CD Player. ... 6 Disc AM FM Stereo Cassette Radio Bose OEM LKQ (Fits: Nissan Maxima).

Nissan Maxima Car Stereo Removal and Repair - YouTube

? 8:52
https://www.youtube.com/watch?v=RT-SZEfeA4Q
Sep 16, 2012 - Uploaded by Factory Car Stereo Repair
Factory Car Stereo Repair .... I have nissan maximal 05..the CD part turns on but the cd won't eject...should ... I have a 2005maxima non-bose radio system. ... my speakers is super in my 05 maxima but my cd player keeps on ...

Nissan - Factory Car Stereo Repair



Feb 03, 2016 | Nissan Cars & Trucks

1 Answer

The stereo plug was cut out of my 89 geo metro and im trying to hook a cd player up. i need the color code for the factory harness going to the stereo


this is the year way before the radio color standards.
so get it off the metro forum/
in google i type, "metro forum" no qoutes and see..... yah.
or get it off mitchels
or alldata dot com.
or buy and FSM on fleabay.

Feb 14, 2013 | 1989 Geo Metro

1 Answer

How can i replace the manufacture radio in my car and replace it with aftermarket car stereo


You best bet, because of a warranty, is to have a professional shop install your stereo. But if you are like all of us guru's here, you like to get your hands dirty.

First you need to remove the dash around your factory stereo. Be patient here and try not to break any of the dash. You may need to remove screws and pop loose plastic retainers located on the backside of the dash.

Wire the after market stereo to the harness located below by maching the colors provided. Thank the stereo companies for making this simple. Use crimp connectors or solder your connections, which ever best suits you. Tape up any remaining wires with eectrical to minimize the chance of a short.

Take the metal sleeve provided by the sereo you choose and install it into the install kit located below. Once you have removed the factory stereo, test fit the install kit and attach any tabs neccessary provided by the kit.

Now take the aftermarket stereo and place into the sleeve you installe din the install kit until it clicks into its locks. Now, the harness you wired up earlier, plug it into the factory harness and then into you stereo. Hook up the antenna, you may need to purchase a antenna adapter. Now before you install the stereo, do a test run to make sure everything is working. Once you are content that it is all working, install the new stereo and then reverse the steps in removing the dash panel and stereo.
Below are pictures of the needed hardware:
b1a0aa3.jpg

742ca2a.jpg

Sep 14, 2009 | 2003 Pontiac Vibe

2 Answers

1995 Geo tracker Stereo Unlock Code


You must bring the the car to a geo/chevy dealer so they can reset the radio to factory unlock. It might be cheeper to have a new cd radio installed best by is a good place for around $200 a radio can be purched and installed .

May 23, 2009 | 1995 Geo Tracker

1 Answer

Cd Player


Yes i can solve your problem first you must have the proper radio code 4 numbers and shut off engine and leave radio on with key on accessory with it displaying off leave it the radio on for 3 hours then enter the proper code and it should work fine THIS IS THE FACTORY PROCEDURE

May 21, 2009 | 1997 Volvo 850

2 Answers

2005 town and country factory stereo removal


It's actually not too hard when you figure everything out. I just installed an aftermarket stereo and couldn't get any sound until I stumbled across a solution on this site. First you need to get the correct wire harness which I bought on ebay for $1.99. Then you need to get the install kit. I got mine at Radio Shack for $10.00 cause they're going out of business. You can get it at Best Buy too or any other car stereo place. To get the old stereo out. Take out the cup holder. There is a button on the top rear of it that releases it. Then remove the 2 screws at the bottom. Gently pull the entire trim that surrounds the stereo, cd changer and ac controls. You will now have access to removing the stereo. It's very easy after that. After you connect the wire harness and install the new stereo you need to run a wire from the red ACC wire on the stereo to the NBS relay in the fuse box under the hood. That's it! Good luck. Sorry I have no pictures.

Feb 12, 2009 | 2001 Chrysler Town & Country

1 Answer

'99 ford escort radio changes modes then turns off


Its my belief that stereos in vehicles can become corrupted by maleware code. Do you play mp3, ipod, or burned cds in the stereo. I broke my factory stereo when I played a burned cd once. The market is ripe for virus and maleware protection for your car stereo so don't be surprised if you see virus protection and their virus creating friends on the scene soon. "Try reseting the stereo". You can also try to pull the ground to the car battery for 2 minutes but you will have to let the car idle for 10 minutes after you reconnect the post to set the idle correctly and let the car essentially reboot. Also jump starting a vehicle could cause malfunctions in the stereo if not breaking the electronics inside, very likely in the colder climates.

Jan 27, 2009 | 1999 Ford Escort

1 Answer

Replace 2005 Nissan altima stereo receiver


Try radio shack, or stereo sales/installation place for ready to go plug adapter. For a few bucks, it saves headaches, and butchering the wiring in case you want to re-install old one later when trading in or selling the car.

Aug 30, 2008 | 2005 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

1,183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...