Question about 1993 Toyota Corolla

1 Answer

Installing replacement headlight assembly on 1993 corolla

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,296 Answers

To change the headlight bulb follow the instructions from this link http://www.fixya.com/cars/r7610955-change_headlight_bulb_toyota

Posted on Jan 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace burnt out headlights?


There are two bolts on the top of the light assembly that need to be removed. you can see them with the hood up.
After that, you can work the headlight / signal light assembly forward enough to remove the bulb retainer ring and wiring harnesses.
installation is the reverse of dis-assembly.
https://www.youtube.com/watch?v=3ovBpr9qYmk

Jan 05, 2015 | 1993 Pontiac Grand Prix

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

1 Answer

Replace low beam drivers side headlight on 1993 olds cutlass supreme convertible


Remove turn signal assembly (uses a torx 15 driver). This will expose the two 10mm bolts on the one side of the headlight assembly. Remove the plastic front grill (uses a torx 15 driver - there are about 6 screws). This will expose the other two 10mm bolts on the headlight assembly. Remove the four 10mm bolts to remove the headlight assembly and this will allow you access to the headlight you need to replace.

Feb 18, 2011 | 1993 Oldsmobile Cutlass Supreme

1 Answer

How to install a headlight


Locate the headlight bulb in the engine compartment, in the rear of the headlight assembly. It has a wiring harness connector attached to it.

Remove the wiring harness connector from the bulb. Release the locking tab on the connector and pull it off the bulb. Lay it aside

Locate the locking ring on the back of the headlight assembly. Turn the lock ring 1/8 of a turn counterclockwise to release the lock from the headlight assembly. Remove the lock ring and set it in a safe place.Remove the headlight bulb from the headlight assembly, pulling it straight back toward the engine. Discard the old bulb, unless you are reusing the bulbs in the Jeep.Insert a new bulb into the headlight assembly. (Be careful not to touch the glass when handling the bulb. The oils from your hands can cause it to overheat and shatter.)Install the headlight lock ring onto the headlight assembly and turn it clockwise 1/8 of a turn to lock the bulb into the assembly. Connect the wiring harness connector to the new bulb, ensuring that it seats completely on the bulb.Move to the opposite headlight and repeat the process to replace the second bulb. Turn on the lights to verify they are working correctly.

Jan 13, 2011 | 1993 Jeep Cherokee Country

1 Answer

How to change a headlight on a 1993 toyota corolla


How to Change Headlights in a Toyota Corolla. :--- the procedure is as follows:-------- 1)Unfasten the battery cables on the Toyota Corolla with an open end wrench and remove the battery from the engine compartment. Set the cables aside so that they do not come into contact with each other or any metal parts. 2)Remove the coolant and water containers that are in the engine compartment near the front of the motor by undoing the brackets that are holding them in place with a socket wrench and moving the containers aside. They only need to be moved enough to provide you access to the area behind the headlamps and do not need to be drained.3)Locate the headlight plug on the back of the headlight and turn the plug 1/4 turn counter-clockwise to loosen the plug. Then pull it straight back to detach it from the headlight.4)Locate the clip on the side of the plug and push it in and up to detach the old headlight bulb. Take the old bulb out of the plug and place the new bulb in the plug using a clean cloth to handle the bulb.5)Push the new bulb in to the plug and turn it until you hear the clip lock into place. Insert the plug into the back of the head light assembly and turn it 1/4 turn clockwise to secure the plug. 6)Repeat this procedure with the other headlight bulb and then move the coolant and water containers into place and secure then to the vehicle. Put the Toyota Corolla battery back in the engine compartment and reattach the battery cables. Thats it. This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Apr 10, 2010 | 1993 Toyota Corolla

2 Answers

How do you replace the headlight bulb on a Toyota Corolla 2003


Hi,

You have to remove the headlight assembly mounting screws and remove the headlight assembly. Remove the power cable by squeezing the lock clip to release the cable, then release the bulb from the headlight assembly. Reverse process for the new bulb.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 08, 2010 | 2003 Toyota Corolla

1 Answer

How to replace the entire left side headlight assembly?


to replace : start by raising the hood, un screwing the turn signal and popping it out, next remove the front bumper, this makes everything so much easier, then locate and remove all the nuts and bolts attaching the headlight assembly. fairly simple, just time consuming, good luck and i hope this helps

Jun 01, 2009 | 1998 Toyota Corolla

Not finding what you are looking for?
1993 Toyota Corolla Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...