Question about 2005 Dodge Durango

Open Question

2005 durangowill not start,just clicks and security light flashes.code reader says p0700,transmission control system malfunction.and also p0562 system voltage low.please help.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 2000 Dodge Sratus 4 speed auto transmission

Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.

Posted on Jan 08, 2009

Ad
  • 141 Answers

SOURCE: P0700

on the fire wall . be carful you replace the tcm there is no bringing it back if you smoke that one to . remeber check for why the tcm failed!. unless you got money to burn i do not. good luck kdc744

Posted on Feb 08, 2009

polarcycle
  • 1392 Answers

SOURCE: 2003 Dodge Ram 1500 computer codes

P0304, could be a bad plug, bad coil, bad injector, low compression, or other stuff. The P0700, you need to look at codes in the TCM. It is telling you that the trans computer has a fault in it.

Posted on Jun 20, 2009

  • 9 Answers

SOURCE: 2005 Dodge Grand Caravan SXT Malfunction

P0700 is the internal trans controller.

Posted on Oct 13, 2009

  • 14036 Answers

SOURCE: P0700 Transmission Control System Malfunction came

THIS IS A DEALERSHIP FIX.CODE MEAN TRANSMISSION CONTROL MODULE REQUESTED MIL ILLUMINATION.IF YOU HAVE PROBLEM WITH TRANSMISSION MODULE IF REPLACED IT HAS TO BE REPROGRAM BY THE DEALERSHIP.

Posted on May 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I get code p0700 on 2004 dodge ram 1500 4.7 lt.


transmission system malfunction can be a few things the following links give some examples of different problems associated with p0700 code but more than likely if their is a noticeable problem than may have to have it diagnosed by a transmission shop
P0700 Transmission Control System Malfunction P0700 Dogge Ram Yahoo Video Search Results 2005 Dodge Ram 1500 transmission codes p0700 p0841 Transmission Automatic...

Aug 05, 2016 | 2004 Dodge Ram 1500

1 Answer

I have chrysler sebring 2004 I need the name for 3 codes p0562 , p0700,p0499


P0562 - system voltage low (speed control and idle control system)

P0700 - transmission control system malfunction

P0499 - evaporative emission system vent valve control circuit high

Dec 29, 2015 | Chrysler Cars & Trucks

1 Answer

Transmission down shifting to 2 code po 700 or but it does not shift to 3rd gear anymore was resetting it 1st time lasted a month then every 2 or 3 weeks now i can"t reset it anymore no codes


P0700 Transmission Control System Malfunction OBD-II Trouble Code Technical Description Article by Dale Toalston ASE Certified Technician Transmission Control System TCS Malfunction What does that mean? Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory. This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module. Symptoms Symptoms of a P0700 DTC may include: Malfunction Indicator Lamp (MIL) illumination The transmission may exhibit drivability problems like slipping, etc. Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself. Register now to ask a question (free) Related P0700 DTC Discussions pt cruiser P0605, P0700, and P1391 What does P0605, P0700, and P1391 mean....I just put in a new catalyst on my car for smog but light engine turned back on...and I can't seem to know what is wrong ...please help me out here... 2002 Dodge Intrepid P0700 & P0841 code my code scanner come up with the codes PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the machanic i go to tells me my transmission has to be replaced bu... ODB Codes Dodge Caravan 2005 P0700 and P0522 Hello I have a 2005 Dodge caravan and need a fix for these codes please.. P0700 and P0522 came up.. basically ths is stuck in limp mode or 2nd gear.. I am thinking I need a new Transmission Control module.. but can anyone confirm that... 2001 Honda Civic accord p0700 and p0740 Hi I went to get my Honda civic check and p0700 and p0740 codes came up the car has a lil leak But however the car is not slipping or anything. it's not showing no Transmission sign issues. I wanted to know what could possibly be the problem thanks you... 2005 Dodge Caravan P0700 and P0420 I have a 2005 Dodge Grand Caravan.The other day the check engine light came on.I stopped at auto parts store and they checked codes for me.P0700 and P0420 are the codes that came up.What do these mean and why did they show up?My van is running fine.Do I need a tuneup?Or is it something else?I am hop...

Read more at: http://www.obd-codes.com/p0700
Copyright © OBD-Codes.com

May 23, 2015 | 2006 Dodge Dakota

2 Answers

2006 Dodge stratus code p0700


code p0700 refers to transmission control system/ mil--malfunction===causes--wiring--TCM
check all wiring and connections to the transmission for water,corrosion etc
check/change the tcm ( transmission control module)

Apr 23, 2015 | 2006 Dodge Stratus

1 Answer

I have a 2005 dodge grand carvan What do the codes p0700 and p0562 mean? and how do i fix it ?


P0700 is generic transmission code, transmission malfunction.. Have it read with a scanner to find the exact code. p0562 is battery voltage is low. Check positive and negative cables for corrosion and good connection. Also check the engine and body grounds. Make sure you have a engine to body strap/ground. They break. This could be the reason you're getting the p0700 code.

Oct 14, 2014 | 2005 Dodge Grand Caravan

1 Answer

04 2.7 intrepid wont start .p0344 p0700 p0562


P0344 Camshaft Position Sensor Circuit Intermittent

P0700 Transmission Control System Malfunction

P0562 System Voltage Low

I would start with the P0562 issue. Check the battery voltage - it should be at a minimum of 12 volts (DC). You can try charging the battery with a trickle charger overnight and if the voltage does not come up to 12 volts then you should replace the battery. If it comes up to 12 volts then try starting it up if it starts you should get the alternator checked out at a garage. A simple alternator check is measuring the voltage at the battery you should get between 13.2 to 18.2 volts when the vehicle is running. The low voltage may be the cause of the other two codes. If not the P0344 indicates you may need to replace the sensor or if the timing slipped you may need to replace the timing chain / belt. The P0700 could indicate a low fluid condition or it may mean take it to a transmission mechanic.

Nov 28, 2010 | 2004 Dodge Intrepid

1 Answer

P0700


P0700 means that the TCM (transmission control module) has detected a fault in the electronic control system of the transmission and has requested the PCM (powertrain control module) to turn on the check engine light to alert u to the fact that the transmission has malfunctioned, u must now get the the TCM tested to see what particular fault code(s) u have, these codes can't be read with a generic ODB2 scanner or code reader, u need a dealer to test the TCM, the OBD2 code reader can't do that.

Oct 17, 2010 | 2002 Dodge Intrepid

2 Answers

Code P0700, transmission control malfunction light is on. what does this mean and can we drive the car? This is a 2005 Chrysler.


code P0700, transmission control malfunction light is on. what does this mean and can we drive the car? This is a 2005 Chrysler.

Jul 06, 2010 | 2005 Chrysler Town & Country

1 Answer

Check engine light on 2005 town and country 3.3


(DTC) CODE # P0700....Transmission Control System (MIL Request)

Translation:
Transmission Control Module (TCM) Malfunction or Failure.

P0700 Information Code

The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM.

This code is for information ONLY. If this code is present, check for transaxle codes.


P1776: Solenoid Switch Valve Latched in Low/Reverse Position. The TCM monitors the L/R solenoid to ensure that the fluid transfer happens. It uses a Pressure switch to verify this. Usually this code is set by a switch that is stuck or a solenoid that is not mechanically operating.

A transmission shop would be better suited for this type of work.

Apr 11, 2009 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2005 Dodge Durango Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...