Question about 2006 Toyota Sequoia

1 Answer

How do you get the spare tire down on a 2006 Sequoia

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 39 Answers

Use the extension rod with jack set (as if will use the jack)... open the rear door, insert it all the way in the hole near by door lock (exactly infront of you facing the back opened!), then keep turning it anti clock wise.... good luck

Posted on Nov 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put 2006 Buick Lucerne spare tire


Are you asking how to fit the spare tire and wheel to the car due to having a flat tire, or are you asking how to stow the spare tire back in the car?

Nov 21, 2016 | 2006 Buick Lucerne

1 Answer

The tire pressure indicator on my toyota sequoia 2006 is blinking. How do I fix it?


did you read the operators guide,
lost it?
it tells you. !!
pump up all 5 tires to door jam spec'd pressure, all 5, as some cars
monitor the spare, all that is in the guide, read, it or buy it if lost.
why not RTM why not carry it , and stop getting stranded.
the book has may clues, search all the DO NOTs.
read them first.

Dec 14, 2013 | Toyota Sequoia Cars & Trucks

1 Answer

How to reset the tire pressure warning light on 2005 toyota


Also, make sure the spare tire pressure is within 2 to 3 PSI of the other tires. Typically you should be at 32 PSI for stock tires / rims.

May 11, 2012 | 2005 Toyota Sequoia

1 Answer

Orange light that looks like an exclamation point inside of a light bulb in 2007 sequoia


It's actually an exclamation point inside of a flat tire symbol. It's your auto sensor for the air in your tires indicating that they need air. Check the spare too as that tire is on the sensor as well.
Jeff

Apr 24, 2011 | 2007 Toyota Sequoia

2 Answers

My Sequoia keeps losing power temporarily on inclines and sometimes on flat road. The VSC Trac light flashes when this happens. There's nothing slippery about the roads. It'll even happen in a parking...


If you have good spark plugs replced, New/ clean Air filter and using the proper gas! you need to check with a good workshop, cause propably you have an issue with the Torque coverter in your transmission! Good luck

Nov 12, 2010 | 2006 Toyota Sequoia

1 Answer

How do I change tire on 2006 jeep


The owner manual will tell you the jack location and the jacking points. Loosen the lugnuts half a turn before you jack it up. Jack it up and remove the nuts. Put on the spare, and reinstall the nuts and run them down. Lower the car and tighten the nuts as tight as you can get them. Then drive the car to a tire shop. The spare is a temporary spare.

May 16, 2010 | 2006 Jeep Grand Cherokee

1 Answer

Low tire light reset


Check the spare tire pressure , It's hard to get to,  Valve is turned up to body. I turned my spare upside   down.

Jan 11, 2010 | 2006 Toyota Tundra

1 Answer

What does a ! light mean?


Hello!

If you are referring to the ( ! ) symbol, it indicates that you have an issue with your tires, one of more being low on air.

It is the tire pressure warning light.

Dec 07, 2009 | 2006 Toyota Sequoia

1 Answer

I need to reset my tire warning light and the service needed light. How do I do this???


Your tires have pressure/temp sensors in them. Even the spare tire. Set them all at 35lbs. Most times people forget about the spare and it keeps the light on. Turn the key on and wait about 2 mins. The light should go out. Some Sequoias have a reset button under the steering wheel on the bottom of the dash. This sets the low pressure threshold and only needs to be reset if memory was scrambled somehow. Rare so don't worry about that now. If the light blinks on startup its possible you have a bad sensor in one of the tires and will need to checked at the dealer.
The MAINT light is reset with the little stem button you use to change the odometer from odo to trip 1 or 2. Set it to odo and turn the truck off. Push and hold the button while turning the key to on. The display will show -------------- Keep holding it until it changes to 0000000. The its reset for another 5k miles.


Apr 13, 2009 | 2006 Toyota Sequoia

Not finding what you are looking for?
2006 Toyota Sequoia Logo

674 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...