Question about 1995 Ford Taurus

1 Answer

The turn signal and emergency lights are not working, nor do they work on the dash. The fuse isn't blown.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Its possible, check the FLASHER units for 1995 Ford Taurus 3.0L EFI 6cyl the Flasher is located front seating area, driver side, under dash, driver side of steering column, mounted behind instrument panel.

Hope thios heslp (remember to rate this).

Posted on Nov 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Turn signal lights don't work


The first place to start are fuses, check your owners manual for location, typically left side of dash.

The emergency (hazard) flashers and turn signals are on separate fuses and run through the hazard switch. If all the lights work when the hazard switch is on then the problem will likely be a blown turn signal fuse.

Other possibilities are the hazard switch itself is bad, the turn signal switch is bad or a broken wire, all of which require a meter (or test light) wiring diagram and knowledge of the circuit to test it - better to have it done.

Robert Grove
Mobile Mechanic Malibu 310 651 8020 Auto Truck RV Mobile Repair...

Aug 09, 2014 | 2002 Chevrolet Impala

5 Answers

Signal And Brake lights


The flasher unit is located under the dash, near the steering column. This could also be caused by a faulty ground wire. Check the wiring for broken, bare, or loose wires or connections.

Jul 25, 2008 | 1998 Dodge Ram 3500 2WD

3 Answers

I have a 2000 ford explorer and both my 4 way flashers and turn signals are not working


check the fuses and both flasher cans,if not working then,u need to check the blinker switch

Dec 23, 2010 | 2000 Ford Explorer

1 Answer

Ok a friend gave me a 1996 toyota 4 runner the turn signals only work when u do them maualy rigth or left i CANNOT find the emergency flasher switch location neither ive replaced the flasher relays and the...


Yes your right the emergency flasher switch is the flasher and located in the middle of the dash and it has a triangle on it with a point up and a ! in the middle. It's dark red in color and when depressed lights up red and flashes ( if it's working like it's supposed to ) If the fuse for hazard is blown the flasker won't work on turn singal either. The fuse for the hazard is hot all the time and the turn fuse is only on with the key. You might find that when you find the button and push i thaqt the turn signals work normally and after you find why the flashers doesn't work on hazard then the hazards will work too.
with the hazard switch poped out of the dash ( it just pries out) it'll have lot's of wires one will be hot all the time and another will become hot when you turn the key on. the other wires go to the turn signal switch. If you find that the switch works fine and it still does flash on turn but it does flash on hazard with it on as a hazard go around and look at all of the lights. They have to work on both the frontand the back and the indicators in the cluster ( speedometer head ) If they all work and are bright ( not dim light the running light) The hazard switch is bad as it's the flasher is made into it.

Nov 30, 2010 | Toyota 4Runner Cars & Trucks

1 Answer

Turn signals and emergency flashers do not work


the flasher under the dash for your turn signals

Nov 06, 2009 | 1997 Lincoln Town Car

1 Answer

Turn signals work intermittantly


multifunction switch? I think so.

Jan 29, 2009 | 1999 Ford Explorer

1 Answer

Diagram


ok, the dash does not show the blinker is on, did you check the front and back to see if any of the turn signals were on, but not blinking? Also the side marker lights should light up if the turn signals aren't working, do they? Let me know. Next check the fuse box, it's on the driver side, under the dashboard. The fuses will be labeled, check the fuse for the turn signals.
Check to see if it"s blown. If it is, or you aren't sure, replace it with one of the same amperage (the # of amps is on the fuse). The fuses can just be pulled out to check them. If you still don't have working blinkers, go back to the fuse block under the dash. There are 2 round canister shaped units plugged into the fuse block. One of them is the turn signal flasher. They are about the diameter of a quarter, and a bit over an inch thick. If your emergency flashers are working, unplug one of the flashers. If they don't work after unplugging one, then you just unplugged the emergency flasher, so the other one is the turn signal flasher. Replace with a new one, identical to the old one. Let me know when you have followed all these instructions and what happens. countrycurt0

Aug 11, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Ford Taurus Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...