Question about 1994 Geo Tracker

Open Question

I can't find the timing mark on the Harmonic Balancer for my 94 geo tracker, can you give me an idea were to look. All I can see on it are 3 holes that are side by side. There is no other markings I can see.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 95 geo prizm hamonic balancer belt pulley

replace the balancer

Posted on Jul 17, 2008

  • 1 Answer

SOURCE: 1993 Geo Prizm Lsi Harmonic Balancer

Yes a harmanic balancer from tha corolla is the same thing. I had to do the same thing with my 95 geo. It works out to be a lot cheaper buying for a toyota than a geo.

Posted on Mar 23, 2009

VWdan
  • 114 Answers

SOURCE: how do you take off the harmonic balancer 1990 geo storm

with a harmonic balancer puller. And good luck Its been on for a longgg time use wd40 and stuff

Posted on Apr 24, 2009

  • 44 Answers

SOURCE: 94 metro where r timing marks to install new belt on pullies

yes on 3 & 4 cylinder eng.

Posted on Jun 29, 2009

  • 1 Answer

SOURCE: 1992 Geo tracker

why does my tracker only go 25 and when is stop it dies

Posted on Nov 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque spec for the harmonic balancer bolt on a geo 1.6l


94-/ft/lbs

revised in 1996 and is retrograde appliable to 89 and out to 98+
All G16 engines.

http://www.fixkick.com/t-belt/tbelt-index.html

May 16, 2014 | 1994 Geo Tracker

1 Answer

I have the distributor out of a 2000 Blazer with 4.3L engine. Manual says to line up 2 marks on harmonic balancer with timing marks on front of engine with cylinder 1 at tdc on compression stroke. Can you...


its real simple on the harmonic balancer the outer ring has a line in it on the front of engine there is a timing tab that hangs over the harmonic balancer line up the line with the correct timing degree 4 6 or 8 but to check for compression stroke number 1 piston has to be up and both valves have to be closed hold your finger over the number 1 spark plug hole and have someone tap the key till air blows your finger off the hole line up timing mark on balancer it should be close now you could use a socket on balancer bolt now drop in distributor lining up rotor with the number 1 spark plug wire rotor should point towards number 1 spark plug on engine driver side front distributor wont be all the way down because it has to drop into oil pump shaft just turn engine over with a ratchet on harmonic balancer bolt one or two revolutions and distributor will drop right in to oil pump then install retainer and bolt for distributor then use a timing light while engine cranks to get timing close to start it then time it correctly after it starts

Aug 25, 2010 | 2000 Chevrolet Blazer

1 Answer

I am looking for a free wiring harness manual for


i just purchased a Chiltons manual from O'Rielly's for a 94 tracker its marked SUZUKI (Samurai/Sidekick/Tracker 1986-98) It includes FULL Wiring/cavuum diagrams....Hope his helps
Kevin

Feb 14, 2010 | 1993 Geo Tracker

2 Answers

I changed the harmonic balancer and now it is terribly out of time. Didn't touch any timing belts, distributor or the like. Any advice?


There may be a magnet on the harmonic balancer for the crankshaft sensor,

The cam and crank sensor call for spark to the plugs..

Some cars you need a Harmonic Balancer Installer Adapter,
to make sure everything is lined up and gaped..

Check the crankshaft sensor for damage from inproper install, also check the wires going to sensor,, some times the harmonic balancer are such a Pain!! to come off the sensor or wires get damage in the battle.






Nov 30, 2009 | 1995 Geo Prizm

3 Answers

I need a diagram of engine timing marks for a 1.6 litre engine


1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl

2efa731.jpg

Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2) is aligned with the notch (3) on the inside timing belt cover (4) ...

5a2ee07.jpg

Fig.: ...and ensure that the crankshaft sprocket (1) timing mark (2) is aligned with the mark on the oil pump (3)

For more details, can register in autozone.com (free).

I hope help you with this (remember rated this help) Good luck.

Oct 15, 2009 | 1996 Geo Tracker 2 Door

1 Answer

1993 Geo Prizm Lsi Harmonic Balancer


Yes a harmanic balancer from tha corolla is the same thing. I had to do the same thing with my 95 geo. It works out to be a lot cheaper buying for a toyota than a geo.

Jan 11, 2009 | 1995 Geo Prizm

1 Answer

How do you take off the harmonic balancer 1990 geo storm


with a harmonic balancer puller. And good luck Its been on for a longgg time use wd40 and stuff

Jul 21, 2008 | 1990 Geo Storm

Not finding what you are looking for?
1994 Geo Tracker Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...