Question about 1995 Nissan Pickup

Open Question

How do you set the timing on a ka24e nissan pickup

Posted by on

  • mrlueac
    mrlueac Oct 09, 2012

    how to srt timing oon 1993 ka24engine



5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 80 Answers

SOURCE: My 1997 Nissan 4x4 pickup 2.4L 4 cyl manual

this could be caused by several different things.check E.G.R.vave to make sure its not sticking.Check fuel system,start with testing fuel pressure then filter and pump check every vacuum line carefully to make sure there is no cracks or leaks.I assume your computer is not setting a code so that could possibly eliminate your MAF sensor.Let me know whats up and I will check back with you.If this does not work I have more answers.

Posted on Oct 14, 2010

  • 19 Answers

SOURCE: How can I set ignition timing for a 1993 Nissan pickup D21 2.4L

the mark to the right of the pully will be 0 .. it will be like this. 8 6 4 2 0

Posted on Apr 21, 2009

  • 158 Answers

SOURCE: looking for the firing order


Posted on Feb 28, 2011

  • 17970 Answers

SOURCE: I have a1997 nissan 4x4 pickup with a ka24e bad

Its so rare, check this firing order for 1997 Nissan D21 Hardbody SE King Cab 2WD 2.4 liter DOHC L4 (KA24E) and 1995 Nissan D21 Hardbody 2WD 2.4 liter DOHC L4 (KA24E)...



Fig. 2: KA24E Engine Engine firing order: 1-3-4-2 / Distributor rotation: counterclockwise

Hope helps.

Posted on Mar 06, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1997 Nissan pickup 2.4 head torque sequence

From repair manual for 1996 KA24E 2.4L engine:

Number bolts as follows:
Exhaust side, front to rear - 8, 6, 1, 3, 9
Intake side, front to rear - 10, 4, 2, 5, 7

Tighten bolts in numbered sequence, five steps.
Step 1 - 22 ft-lbs
Step 2 - 58 ft-lbs
Step 3 - loosen all bolts completely
Step 4 - 22 ft-lbs
Step 5 - 54-61 ft-lbs

Oct 19, 2014 | 1997 Nissan Pickup

1 Answer

I need to know how to line up all the timing marks on 97 Nissan pickup with 2.4l ka24e 12valve engine I'm doing a head job & putting new timing chain oil pump I have never done one before on this type of...

they are pretty much all the same line up your 2 camshaft marks with your crankshaft mark they should all facing the same direction ,if you look on ebay I will bet your problem is solved there , good luck

Sep 21, 2014 | Nissan Cars & Trucks

1 Answer

Cylinder head torque settings for a Nissan KA24E engine

54 - 61 foot pounds of torque. Be sure to follow the tightening sequence!

Dec 25, 2013 | Nissan Cars & Trucks

1 Answer

Tears timing chain ajuster off nissan1989 four times

I'm assuming that you are talking about 1989 Nissan Truck 4WD 3.0L FI 6cyl.

In this models, the Z24i and KA24E engines do not use the pin counting method for finding correct valve timing. Instead, set the timing chain by aligning its mating marks with those of the crankshaft sprocket and camshaft sprocket. The camshaft sprocket should be installed by fitting the knock pin of the camshaft into its No. 2 hole. On the Z24i engine, the No. 2 timing mark must also be used.

Excatly, what is the problem? Adjuts timing procedure?

Sep 16, 2010 | 1986 Nissan Pickup 4WD 1986

1 Answer

Need engine size in Nissan pickup

It is either a Z24i, or a KA24E. You should find the identification number on the left side of the block at the rear. It should say what size it is.

Jun 29, 2010 | 1991 Nissan Pickup

2 Answers

Ka24e locate the crank angle sensor

The sensor is located in the bottom inside of the distributor.

Jun 30, 2009 | 1997 Nissan Pickup

1 Answer

Firing on 2 cylinders

check the fuel injectors

May 27, 2009 | 1997 Nissan Pickup

1 Answer

Timing a 97 ka24e motor 4 cyc

the timing cover and the crank pulley.

Sep 19, 2008 | 1997 Nissan Pickup

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides