Question about 2004 Chrysler Concorde

1 Answer

Oil light comes on when brakes are applied. goes off when they are released

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds more like an electrical problem. Check for burned out brake light bulbs and low brake fluid which might be the actual problem being reported by the car. If that does not work, check your oil level, could be missing a quart. And if that is not the problem try unplugging the oil sensor unit and go for a test drive:if it does come on again this would confirm an electrical issue.

Posted on Nov 19, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil gage goes and comes with reading


The parking brake is near a large bundle of wires, if the bundle is touching the brake arm it may have damage, use wire ties and tie it out of the way of the park brake.

Dec 25, 2013 | 1995 Chevrolet K1500

1 Answer

IP Brake light has come on in my 2004 Kia Sorento.. what does this mean?


Kia Sorento parking brake or brake fluid dash warning light - this light is illuminated when the park brake is applied, the warning light should go out when the parking brake is released. If the light does not go out it indicates that the brake fluid level in the reservoir is low and you need to pull over and top up at your first opportunity.

1-check parking brakes not applied
2-check brake fluid
3-if it is too low have the brakes checked they might be wearing out it doesn't mean you have a leak but when the brakes wear out the become thin causing the caliber piston to push out more lowering the oil level in the reservoir

Nov 01, 2013 | Cars & Trucks

1 Answer

2001 Chevy Cavalier no brake lights but turn signals/hazards/backups work just fine. any ideas?


WHEN YOU APPLY BRAKE PEDAL, do you see brake lights come on ? if no then the switch is not working fine ! switch turns lights on when you depress the pedal, releasing the plunger, lights go out when you release the pedal. this switch has a fuse @ fuse block. check it ! if ok, and brake lights do
not come on replace switch, & mount properly in bracket.

Mar 08, 2013 | 2001 Chevrolet Cavalier

1 Answer

Right turn signal light comes on when applying brakes


I would check the earths on the lights at the rear

Jan 14, 2013 | Honda Element Cars & Trucks

3 Answers

Oil light comes on when braking


Your oil pump is failing.... when your engine rpm drops (when stopping) the pump and engine rpm drop to idle..(light comes on). when you accelerate (rpm's increase) the pumps start working harder and the light goes off.... I am TRULY surprised the dealer(who did you see at the dealer???) did not know this,... THIS IS BASIC STUFF!! ... I mean 090 level mechanics...

Get the oil pump replaced immediately!!!!

Jun 06, 2017 | Cars & Trucks

1 Answer

Why does the parking break light stay on in my 97 Olds Cutlas Supreme. I have checked the level of the break fluid and it is full. I did have new break lines put in last year. I did have to slam on my...


Apply the parking brake with the vehicle parked, engine turned off and transmission in Park. Release the parking brake completely, then apply it again, and ensure that it is fully released. Turn the ignition on, check to see if the Parking brake warning light is on. If it is NOT on, apply the parking brake and check to see if the warning light comes on. If the light come ON wihen the Parking brake is applied,.....fully release the parking brake and check if the warning light goes OFF. If it does NOT go off, then an adjustment is needed at the parking brake switch.

Jan 09, 2011 | 1992 Oldsmobile Cutlass Supreme

1 Answer

2001 chevy S10 brake is applied the right tail light goes out


you have a bad ground. go to that light bulb socket and check for ground to the socket.

Mar 07, 2010 | 2001 Chevrolet S-10

1 Answer

The parking brake light for my 2002 pontiac grand prix comes on and off at will. I applied the parking brake and release it stays on and the goes off and comes back on its confusing to me


Make sure you have the proper amount of break fluid in the resivor. the next time it comes on, pop the hood and unplug the connector that is going to the brake master cylinder, see if it goes out.
Report back if the light stays on. If it goes out then the fluid level sensor is bad. You can replace just the sensor, you do not need to replace the whole resivor.

Oct 18, 2009 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2004 Chrysler Concorde Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...