Question about GMC Sierra 1500

2 Answers

M2000 gmc sierra passenger seat belt won't retract

Posted by on

  • 2 more comments 
  • dkeb3328 Nov 15, 2010

    gmc 2000 sierra passenger seat belt does not retract how to fix

  • dkeb3328 Nov 15, 2010

    need yo know how to fix

  • dkeb3328 Nov 17, 2010

    checked with gm and no recall on this model

  • dkeb3328 Nov 18, 2010

    there is no switch, and how do you remove the seat belt?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

This could be a couple of things that would cause the seat belt to not retract. Either the seat belt has twisted and is bound up in the retract-er. Or the switch when you open the door is stuck. A lot of times the switch on the door gets stuck and will not release the spring in the belt retract-er.

Posted on Nov 15, 2010

Ad

There may be a recall on your seat belt re-tractor. Possibly a small plastic piece has broken off and caused it to not retract. You will need to replace your seat belt retractor. Click on the link below to read more:

http://www.gm-trucks.com/forums/index.php?showtopic=90797

Posted on Nov 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a stuck retractable seat belt?


You can't it is not designed that way. The seatbelt mechanism is damaged and needs to be replaced.

Feb 21, 2016 | 1999 Chevrolet Blazer

1 Answer

Subaru how to unlock seat belt


Not quite sure what you mean by got around passenger seat. But if the seat is blocking the belt from retracting, then you only need to unbolt the seat from the floor enough to manipulate the belt around the seat. Or just completely unbolt it all the way, you just need a 14mm deep socket and a ratchet. But if you mean the belt just won't retract, then you'll need a new retractor assembly. I hope this info helps!

Aug 22, 2014 | 2010 Subaru Outback

1 Answer

Does 2004 gmc sierra 3/4 ton have weight sensor in front seat for airbag


Quite possibly it does . try sitting something heavy on the seat and see if it actuates it

Jan 15, 2014 | 2004 GMC Sierra

1 Answer

Air bag code 33 for a 2005 lincoln town car


2005 Towncar SRS Code 33 (3 flash + 3 flash, repeat this set for twice. then Beep 5 times pause x 5 = 25 beeps every 30min).

This means you have problem with left (Driver) side pretentioner (Seat belt retract system).
It doesn't mean physical belt or retract mechanism.It is just bomb wiring which is part of airbag system.
When airbag deploy, passenger must stay tight in seat otherwise body lean to front then slam back to seat by airbag.
if belt is loose or delay to lock, passenger's body rocks back and forth.So, system use small bomb (Fire power) to lock and retract seat belt when airbag deploy.There is small bomb and igniter in part of Seat belt retractor.
Code 33 is warning for this part on 2005 Towncar.(older model is different meaning in Ford/Lincoln, it's possibly passenger side airbag system for earlier model)
Before you work for any part of Airbag system and touch any "Yellow connector", * *Disconnect battery (negative side is good enough) and wait at least 5 min to clear all power in system**.(Airbag store back up power for few minutes to be able to deploy even in case if power disconnected)
by the way, you should move your driver seat most forwarded position before you disconnect battery to make it easy to work with seat belt.
locate driver side seat belt retractor (in center pillar between front and rear door, you may have to fight with weather strip)

Locate Yellow connector on bottom of Seat belt retractor (it's called "Pretensioner")it is located on very bottom of rear side of retractor.
only one yellow connector. (make sure your battery is disconnected)
Check its physical connection or looseness.if connection looks fine, you may have to replace whole seat belt ($180-$200 in Lincoln dealer)
You can check if pretensionor is good or bad by regular tester, but unless you know how, I won't tell (because I don't wan't you to blow out pretentionor).








Jul 19, 2012 | 2005 Lincoln Town Car

1 Answer

Seat belt pasenger seat


Are you trying to say the seat belt retractor is stuck? This is in the front seat?
If it's anything like my Tahoe, you need to remove the plastic panel that covers the retractor (carefully - don't break the clips or you won't be able to put it back on). Take a large flat head screwdriver and slide it under the part where the seat belt coils up, and find a little tab - push it with the screwdriver. As long as the seat belt is not twisted up, it should retract.

Nov 30, 2011 | GMC Cars & Trucks

1 Answer

91 honda ex, passenger front seat belt is not working and the light in the dash board keeps lit, I have check the fuses for it, and all the connection to the belt and it seems all intact...any advise?


Your 1991 model Accord has automatic front retracting shoulder belts and, more than likely, the power retractor motor has gone bad on the passenger side front. If the shoulder seat belt is not in the retracted position, up close against the seat, when the car is running, the seat belt light will stay lit on your dash. Have the seat belt motor inspected and replaced if necessary.

Oct 18, 2010 | 1990 Honda Accord

1 Answer

Seat belt will not retract. how do i fix it?


The mechanism that allows it to retract is broken. Replace the seat belt.

Jul 15, 2009 | 2004 Dodge Grand Caravan

1 Answer

Passenger Seat


check the wire underneath the seat and be sure it's not too tight preventing the latching mech on the other side from slipping into the detent.

Apr 07, 2009 | 1993 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...