Question about 1992 Honda Accord

1 Answer

There was a axle installed on a 1992 honda accord on the passenger side and the car will not move it's a stick shift or is there a place for transmission fluid to go

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

I would make sure the axleshaft is fully seated into the transmission. There is a filler plug (17mm) on the passenger side of the transmission, to the left of where the axleshaft goes into the transmission.

Posted on Nov 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 honda accord ex d4 light on at all times and transmission will not shift


There are 2 boxes under the passenger side floor board! Take the smallest box out and replace. Got mine at Honda salvage yard for $200. Fixed the problem,

Sep 06, 2011 | 1992 Honda Accord

1 Answer

How to take out a cv axel from a 1992 honda accord


take tire off undo the nut on the axle undo ball joint remove axle from tire end then with a large pry bar pop the other end of axle out of transmission......place end of new axle in transmission and **** it in push hard and quick till it pops in and reverse previous steps

Feb 08, 2011 | 1992 Honda Accord

1 Answer

WHERE IS THE NEUTRAL SAFTEY SWITCH LOCATED ON A 1992 HONDA ACCORD AUTOMATIC TRANSMISSION


it's under the console--see picture and instructions below and let me know if you have more questions.

fe6c30d.gif
To replace the shift position switch, firmly set the parking brake and block the wheels. Place the shift selector in N. Remove the console. The switch is located on the side of the shift selector, held by 2 bolts or nuts. Unplug the wiring connectors, then remove the switch.
When installing the switch, make sure the switch slider is positioned to align with the shifter arm or tab. Install the switch, tighten the retaining nuts or bolts and connect the wiring. Reinstall the console.
After installing the switch, check that the engine starts only in P or N; the starter should not engage with the shifter in any other position. Check also that the back-up lights come on when the selector is placed in R.

Oct 26, 2010 | 1992 Honda Accord

1 Answer

I have a 1992 honda accord just got a new


make sure they connect the speed sensor back
there is a sensor on the passenger's side
near the passenger's side inner axle boot

Mar 04, 2010 | 1992 Honda Accord

2 Answers

My honda accord 1992 trasmission makes a bumpreaction when shifting from park to drive


With the hood open:

Put the car in park take off the emergency brake and push the car forward and back looking for a difference in movement of the CV joints where the Axle mates to the CV. I.e.... CV joint travels a short distance before you see any axle movement. Worn CV joint knuckles will cause all kinds of clunking.

If there is no movement between the CV joint and axle when you push the car fwd or back you already know the problem is internal to the transmission.

Kelly

Feb 25, 2010 | 1992 Honda Accord

2 Answers

1992 Honda Accord Station Wagon stuck in 2nd Gear


your linkage from the shifter to the transmission is out of ajustment, just tightin it up or loosin it witch ever it needs

Jan 25, 2010 | 1992 Honda Accord

1 Answer

Honda Accord 1992 NO heat in side,heater core getting hote watter ,valve is OK, core is not clogged,blore fan runs OK,still no HEAT.


these cars were common for the cable on the temperature control seizing. if you look under the dash on the passenger side, in front of the center console, you can see the lever that should be moving. have a look and move the control, make sure that it is actually moving the lever.

Nov 28, 2009 | 1992 Honda Accord

2 Answers

Still cant find ECU


the ECU is located on the passenger side floorboard underneath the consold and carpet

Feb 14, 2009 | 1992 Honda Accord

1 Answer

Honda Accord 2.0i 1992


have you looked under bonnet or passenger footwell/glovebox or cntre console area at front there the usual places.

Feb 14, 2009 | 1992 Honda Accord

2 Answers

Where & how to install thermostat in honda accord 1992


some one removed it replace it, the how to do is in the box.
leroy

Dec 17, 2008 | 1992 Cadillac DeVille

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...