Question about 1993 Chrysler Town & Country

1 Answer

Brake booster replacement - 1993 Chrysler Town & Country

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 381 Answers

Just to let you know there was a recall on the hydroboost on these vans. When the abs pump stops working the brakes will be hard to push. The dealer might try to get out of replacing it but part of the recall was the pump has to be lifetime warranty regardless of age and miles or even if it was replaced before with the recall.

Posted on Nov 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace brake booster on 2005 Pontiac aztek


Step 1 - Locate the Brake Booster The brake booster is located adjacent to the master cylinder. There will be 4 mounting screws protruding through the booster. The booster is also attached to the brake pedal in the interior of the car. This is where you will start work in replacing the brake booster.
Step 2 - Remove the Brake Booster Start by locating the booster rod that goes through the firewall and is attached to the brake pedal on the interior of the car. Typically, there is a cotter pin that secures the rod to the pedal, but there may also be nuts. When removing any fasteners in the course of this job, make sure to retain the nuts, cotter pins, and various other fasteners as the new brake booster will not come with replacement fasteners.
Remove the fasteners, whether it is a cotter pin or nuts. Slide the rod off the brake pedal. Disconnect the vacuum brake line that connects to the booster. In the engine compartment, there are four bolts securing the booster to the master cylinder and firewall. Loosen and remove these nuts. Remove the nuts (there are usually 2 in addition to the 4 that have already been removed) that secure the brake booster to the master cylinder. Wiggle the brake booster away from the master cylinder. There is a seal between the two. You will need to keep this as the new part does not generally come with another one. Remove the brake booster.
Step 3 - Install the New Brake Booster Set the new brake booster on the four mounting screws. Tighten the nuts on the bolts to the master cylinder. Insert the push rod through the firewall. Start these by hand so that the threads are not ruined. Reattach the vacuum hose, then the nuts to the 4 mounting screws. Reattach the push rod to the brake pedal by whatever means it was originally secured with, whether by cotter pin or by bolts.
Step 4 - Bleed the Brakes You will need to bleed the brakes after replacing the brake booster

Jul 11, 2016 | 2005 Pontiac Aztek

1 Answer

Need to remove brake booster on 2001 93 auto convertible from fire wall


Jack, Have not done a SAAB brake booster myself, hoping links below will help you out. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Walk me through brake booster replacement
http://www.thesaabsite.com/faqs/FAQ--brakes-contributor--brake-pump-booster-issues-%26-removal.html?id=1300
9 5 Brake booster replacement the easier way
saab 9 3 brake booster replacement Google Search

Jul 04, 2016 | 2001 Saab 9-3

1 Answer

Step by step instructions for replacing brake booster on a 1999 Toyota Camry


its my pleasure to answer your question how to replace the brake booster :
1 With the engine off, step on the brake pedal several times to relieve the brake booster of vacuum.
2 Press the brake pedal down and start the engine. Verify that the brake pedal sinks slightly. Turn off engine.
3 Remove the vacuum hose from the brake booster.
4 Remove the brake lines from the master cylinder. Remove the master cylinder from the brake booster. Plug the fittings to prevent brake fluid seepage.
5 Disconnect the brake pedal from the push rod.
6 Have an assistant hold the brake booster from inside the engine compartment. Remove the nuts that hold the brake booster to the firewall. These nuts are usually located under the dash on the interior of the firewall.
7 Remove the brake booster.
8 Install the new brake booster to the firewall. Tighten the mounting nuts.
9 Connect the push rod to the brake pedal.
10 Connect the vacuum hose to the brake booster.
11 Attach the master cylinder to the new brake booster and reconnect the brake lines.
.12 Bleed the brakes at the master cylinder.

Oct 04, 2013 | Cars & Trucks

1 Answer

How to remove brake booster on 1999 Toyota Camry


The following steps will help you to replace a Toyota Camry brake booster :
1 With the engine off, step on the brake pedal several times to relieve the brake booster of vacuum.
2 Press the brake pedal down and start the engine. Verify that the brake pedal sinks slightly. Turn off engine.
3 Remove the vacuum hose from the brake booster.
4 Remove the brake lines from the master cylinder. Remove the master cylinder from the brake booster. Plug the fittings to prevent brake fluid seepage.
5 Disconnect the brake pedal from the push rod.
6 Have an assistant hold the brake booster from inside the engine compartment. Remove the nuts that hold the brake booster to the firewall. These nuts are usually located under the dash on the interior of the firewall.
7 Remove the brake booster.
8 Install the new brake booster to the firewall. Tighten the mounting nuts.
9 Connect the push rod to the brake pedal.
10 Connect the vacuum hose to the brake booster.
11 Attach the master cylinder to the new brake booster and reconnect the brake lines.
.12 Bleed the brakes at the master cylinder.

Oct 04, 2013 | Cars & Trucks

1 Answer

How do i replace the brake booster on a 98 Mercury villager


12 specific steps will help you :
1 With the engine off, step on the brake pedal several times to relieve the brake booster of vacuum.
2 Press the brake pedal down and start the engine. Verify that the brake pedal sinks slightly. Turn off engine.
3 Remove the vacuum hose from the brake booster.
4 Remove the brake lines from the master cylinder. Remove the master cylinder from the brake booster. Plug the fittings to prevent brake fluid seepage.
5 Disconnect the brake pedal from the push rod.
6 Have an assistant hold the brake booster from inside the engine compartment. Remove the nuts that hold the brake booster to the firewall. These nuts are usually located under the dash on the interior of the firewall.
7 Remove the brake booster.
8 Install the new brake booster to the firewall. Tighten the mounting nuts.
9 Connect the push rod to the brake pedal.
10 Connect the vacuum hose to the vacuum brake booster.
11 Attach the master cylinder to the new brake booster and reconnect the brake lines.
.12 Bleed the brakes at the master cylinder.

Sep 24, 2013 | Cars & Trucks

1 Answer

Can a vacuum leak from a brake booster cause squeaking noise


It's the master cylinder that needed replacing. Check if the booster will still be good after draining it.

Mar 03, 2013 | 2005 Toyota Corolla

1 Answer

2002 jaguar x type how do remover brake booster hoes connector from the manifold


Check the help link below and follow the procedure:----

How to replace Brake Power Booster?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

---------

Where is Power Brake Booster located on Car?

http://howtobyme.blogspot.com/2011/12/where-is-power-brake-booster-located-on.html

---------

How to Replace Power Brake Booster on 1996 GMC Jimmy?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-power-brake-booster-on.html

---------
These will help.
Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Dion5555@yahoo.com1995chev trk brake booster removal


Welcome to Fixya

Look underneath the dash and find the connection from the brake booster to the top of the brake pedal. Take off the clip that holds the pedal to the linkage with your hands. Unbolt the brake booster from the firewall with the 3/8-inch ratchet and socket.Unbolt the master cylinder from the booster with an open-end wrench. Pull the master cylinder off of the booster, then pull the vacuum line off of the brake booster. Take the booster away from the engine bay and discard it.Install the replacement booster onto the Suburban and bolt it in place with the 3/8-inch ratchet and socket. Reconnect the brake pedal to the brake booster with the factory clip.Mount the master cylinder on the booster with the open-end wrench and the factory bolts. Plug the vacuum line into the check valve on the replacement booster. Pump the brakes several times with your foot with the engine running to verify that the booster builds vacuum.
Thank you for using Fixya!

Jul 02, 2011 | 1995 Chevrolet Suburban

1 Answer

I replaced the master cylinder and brake pads and my brakes still dont work on my 1998 chrysler sebring


Have you tested your brake booster and your calipers?Your brake booster doesn't make any noise, and it doesn't use any electricity or gasoline, but it ensures that you can stop your car with only a light touch of the brake pedal. Things weren't always like that: before the invention of the vacuum brake booster, cars still stopped. It's just that you had to really stomp on the brake pedal. The modern brake booster is an ingenious device that operates using something that your engine generates whenever it's running: vacuum. The brake booster takes engine vacuum via a rubber hose that runs from the intake manifold, and the brake booster uses that vacuum to amplify the pressure you put on the pedal. A light application of the brakes is translated by the brake booster into significantly more pressure on the brake master cylinder, ensuring that your car stops quickly. So what happens to the brake booster if your car stalls, resulting in a loss of engine vacuum? Early designers realized that gas engines were hardly foolproof, so they designed a little check valve into the brake booster circuit. The brake booster stores enough vacuum to provide full boost for two or three pedal applications even after the engine dies. The check valve on the brake booster is what keeps that vacuum from leaking out. And speaking of leaks, that's the reason most brake booster units have to be replaced. As your brake booster ages, the rubber seals and diaphragms that hold the vacuum tend to wear out and crack. If the brake booster can't hold vacuum (despite the check valve's best efforts), its time is up and you'll need a new or remanufactured new brake booster.

Jun 14, 2011 | 1999 Chrysler Sebring

1 Answer

Replacing my brake booster


go to the master cylinder and remove it from the booster, disconnect the vacuum line from the booster, then disconnect the brake plunger from your brake pedal inside the vehicle, then remove the booster mounting bolts from inside the vehicle then remove the booster, install in reverse order, once you install the master cylinder, you will need to bleed out any air in the brake system, hope this helps, let me know

May 16, 2009 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?

Open Questions:

See all 1993 Chrysler Town & Country Questions

1993 Chrysler Town & Country Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...