Question about 2000 Buick LeSabre
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Power Steering Fluid???
The power steering pump is located under the alternator near the firewall. It is hard to get to so you most likely need a funnel with a flex pipe to reach it without making a huge mess. I hope this is helpful.
Posted on Jan 04, 2009
Important: The original oil pan gasket is retained and aligned to the oil pan by rivets. When installing a new gasket, it is not necessary to install new rivets.
DO NOT reuse the oil pan gasket. When installing the oil pan, install a NEW oil pan gasket.
Caution: Refer to Battery Disconnect Caution in Service Precautions.
10. Remove the engine wiring harness retainer bolts from the engine oil pan.
11. Remove the engine oil cooler pipe to oil pan bolt.
12. Remove the transmission oil cooler pipe retainer and the bolt from the oil pan.
13. Remove the starter motor. Refer to Starter Motor Replacement.
14. Remove the left closeout cover and bolt.
15. Remove the engine oil pan. Refer to Oil Pan Removal.
Important: The alignment of the structural oil pan is critical. The rear bolt hole locations of the oil pan provide mounting points for the transmission bellhousing. To ensure the rigidity of the powertrain and correct transmission alignment, it is important that the rear of the block and the rear of the oil pan must NEVER protrude beyond the engine block and transmission bellhousing plane.
Will Send Remainder in another this place dont take kindly to larg files Your Email Address would realy be Better Then I could send Pictures Also up to YOU
Posted on Jan 27, 2009
SOURCE: cant get the oil pan off
you have to losen up your motor mount and actually lift the motor up a little ways. now if you do this make sure you block up the motor before you get under the car encase the motor falls. we just did one of these in our repair shop and the one tech tried to cut the corners by not blocking the motor up and the chain did brake. now he is missing 2 fingers on his hand so Be vary carefull while doing this and make sure some one else is with you. Hope this helps you and please rate my solution.
Posted on Apr 21, 2009
Tips for a great answer:
Jul 14, 2014 | 2000 Buick Regal
Jun 28, 2011 | 1996 Buick Regal Olympic Gold
Jul 27, 2010 | 1995 Buick Regal
Jul 16, 2010 | 1993 Buick Regal
Mar 21, 2010 | Mazda Tribute Cars & Trucks
Jan 17, 2010 | 2000 Buick LeSabre
Jul 10, 2009 | 2001 Chevrolet Silverado 2500HD
570 people viewed this question
Usually answered in minutes!