Question about 1997 Chevrolet Blazer

Open Question

I have no power to the third brake light on my 97 chevy blazer.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: brake light on 2001 chevy blazer LT 2wd

i had a recall on my 2001 blazer multifunction switch that operates the brake lights and hazard lights could be it?!

Posted on Jul 08, 2008

Ad
stormbrewin
  • 426 Answers

SOURCE: brake lights do not work, all other lights work.

Have you checked the brake light switch thats activated by the brake pedal arm?if not follow the brake pedal arm up under the dash and you will find a switch that goes on and off when you push the arm in and out.Make sure you have power in and out and the switch is correctly adjusted.

Posted on Dec 12, 2008

ewashmidas
  • 362 Answers

SOURCE: 2005 CHEVY +TRAIL BLAZER ABS AND BRAKE LIGHTS ON

When the ABS light is on when driving there is a problem in the anti lock brake system and you will need to have it tested to find out what the problem is. As long as the light is on the ABS has been shut off by the computer until it is repaired. There could be problems with one of the wheel speed sensors, wiring or the ABS pump. On some vehicles the red brake light will come on too.

Posted on Jan 28, 2009

  • 1 Answer

SOURCE: 2002 Chevy Blazer, rear brake lights do not work

I had a similar problem and when i went to the auto electric place the guy said its a brake switch next to the brake pedal which is not working. He took it out and fixed it. Now its all fine.

Posted on Aug 09, 2009

  • 35 Answers

SOURCE: ABS light on 97 chevy blazer after replacing front rotor.

check the sensor wiring and mounting area for clean surface.

Posted on Mar 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 97 chevy blazer, the brake lights dont work but the third brake light does and the turn signals or hazard lights dont work??


More likely it is the hazard/turnsignal/highbeam/cruise control switch module. It costs about $275 for the module. However there is a repair kit for the likely culprit...the hazard button. Try jiggling it around a little, see if that helps. Spray a little WD-40 into it so it can jostle back into it's correct position. You could try a junkyard unit or Ebay. It's not too hard to change. The hard part is doing it without removing the steering wheel. It can be done. I've done it. But hopefully you can locate the repair kit which costs about 15 dollars. Good luck.

Apr 27, 2010 | 1997 Chevrolet Blazer

3 Answers

When i turn the key I get no dash lights, 97 blazer


I had the same exact thing happen to me, I have a 97 blazer and after hours of screwing around with it and several different options... it turned out to simply be the ignition switch.

Feb 07, 2010 | 1997 Chevrolet Blazer

1 Answer

Where is the whole in the fire wall on a 97 chevy


My 98 was on the driver side just to left of the brake booster. I used a light an looked under the dash for a peice of plastic cut-out in a circle an i used a razor blade to cut into the rubber. I think i used a drill bit also . Pretty easy though

Oct 09, 2009 | 1997 Chevrolet Blazer

1 Answer

Where are the air conditioning fuses 97 chevy blazer located


97 only had one fuse panel in the dash on the drivers side. There is/was a junction block for power that had/has fusible links on the driver side fender too.  a) 20a pwr accy
b) 30a pwr wdo
1) 20a stop/haz
2) 20a horn/dm
3) 20a tl/ctsy
4) 20a guages
5) 20a Eng-1
6) 25a htr/ac
7)25a pwr aux
8) 30a rr defog
9) 20a ecm/batt
10) 20a emc/ign
11) 20a radio
12) not used
13) 10a rdo/batt
14) 10a illum
15) 10a drl
16) 15a turn/back up
17) 25a wiper
18) 20a brake
19) 20a 4wd
20) 10a crank
21) 20a fog
22) 10a air bag
23) 10a trans
24) 10a prndl

The A/C relay is in the glove box behind a panel that indicate relay. There are three relays in there, the middle relay is the fuel pump and one of the out side relay is for the A/C compressor and the other is for the third brake light. Just can not remember which out side relay is the A/C so just swap the out side relays with one another. Good luck and hope this helps. Keep me posted. 

Jun 25, 2009 | 1997 Chevrolet Blazer

2 Answers

No brake lights on 2001 chevy blazer LT 2wd


Check your wires, the smoke could mean an electrical fire.

Jun 03, 2009 | 2001 Chevrolet Blazer

1 Answer

I have a 97 Chevy Blazer w/ 181,000 miles. When


if the key is getting stuck its the Brake Shift Interlock Solenoid its just under the ignition switch you have a short in it you can unplug it or replace it what its doing is over heating the solenoid and at times it can drain your battry.and for the trans acting up you could have a short to one of your solenoids or it could be the trans filter.

Mar 03, 2009 | 1997 Chevrolet Blazer

2 Answers

Brake lights do not work, all other lights work.


It is a common chevy problem for the circuit board that holds to bulb to fail, are your running lights and signals still working back there as well? If not then you need to replace the boards.

Dec 12, 2008 | 2007 Chevrolet Silverado Classic SS New...

3 Answers

Brake light on 2001 chevy blazer LT 2wd


When my blazer did this they had to replace part of the wiring harness in the steering wheel. It took forever for them to get the parts because we live in nowhereville, but once it was in it works again and no problems. I had to take it to the actual chevy dealer because none of the other places had a clue. good luck.

Jun 30, 2008 | 2001 Chevrolet Blazer

1 Answer

1995 Chevy Blazer Wire Color Codes


95-97 blazer or 94-97 S-10
12volts red (there will be 2)+ ignition harness
Starter purple or yellow + ignition harness
Ignition pink + ignition harness
Second Ignition white or pink/white + ignition harness
Accessory orange + ignition harness
Power Lock lt. blue + either kick panel
Power Unlock white + either kick panel
Lock Motor gray drivers kick panel
Unlock Motor tan drivers kick panel
Parking Lights+ brown switch or rear harness
Door Trigger white - keyless module
Dome Supervision use door trigger
Trunk/Hatch Pin tied in with doors
Trunk/Hatch Release black/white + switch or keyless
Tachometer white AC ECM
Brake Wire white + at brake pedal switch
Parking Brake black at the pedal
Horn Trigger black - steering column

Jun 13, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...