Question about 1991 Jeep Cherokee Briarwood

1 Answer

Help I just purchased a used 1991 Jeep Cherokee Briarwood. The battery was dead, so I purchased a new battery, installed, all power comes on but starter wont turn over? Need help on resetting the factory security system, only has key no remote.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Check to see if your starter has power. before trying to start, then with key on then while attempting to start
on the remote situation they are like $50 at the dealer and they program them for free

Posted on Mar 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 97 jeep grand cherokee larado with a 91 grand cherokee motor in it, my oil pressure will go from 40 to 0 every now and again when i come to a stop any solutions?


gauge or sensor could be bad and could be oil pump going bad....hope this info helps and if so please leave rating on this post and good luck.

Aug 15, 2012 | 1991 Jeep Cherokee Briarwood

1 Answer

How do i fill the transmission pan with oil on a 1991 jeep Cherokee


Assuming that the transmission is a automatic, you fill it through the transmission dip stick tube. Just make sure you do not overfill it.

Nov 17, 2009 | 1991 Jeep Cherokee Briarwood

1 Answer

1995 jeep cherokee will loss power while driving


Most common cause of power loss is a stopped up catalytic converter. If you are saying it shuts off while driving, most common problem is the crankshaft sensor. IF you haven't changed the plugs or wires in the last 30K, it is definetly due for plugs wires, and probably cap and rotor button also.

Aug 14, 2009 | 1991 Jeep Cherokee Briarwood

1 Answer

Engine stalls after running for 3 to 5 seconds


could be a fuel pressure problem.. fuel pump could be going out and loosing pressure..

Apr 21, 2009 | 1991 Jeep Cherokee Briarwood

1 Answer

Blowing fuse for dash lights


one of the bulbs is shorting out,

Mar 16, 2009 | 1991 Jeep Cherokee Briarwood

1 Answer

1991 jeep cherokee sport 4.0


 For your 1991 Jeep Cherokee 2WD 4.0L MFI :
  Foot pounds (Final torque) 

  Note:
  Torque sequence ------------------  
  front    | 12  8   4   1   5   9  13 | 
  of | | 
  engine | 11  7   3   2   6   10 14 | 
  ------------------  
Final torque must be reached in 3 equal steps  
  Step 1: torque all bolts (except bolt 11)  
  to 110 Ft/Lbs  
  Step 2: torque bolt 11 to 100 Ft/Lbs  
Recheck final torque in sequence  

Sep 30, 2008 | 1991 Jeep Cherokee Briarwood

2 Answers

1991 jeep cherokee sport 4.0


are they workin on the out side of the vehicle if so behind the dashboard there is wiring that plugs into it check and see if those are plugged in and the cig liter there is a plug behind it and the radio there should be a fuze in the back of it if not on the radio check to see if you have power to the radio and see if the ground is connected good

Jun 21, 2008 | 1991 Jeep Cherokee Briarwood

1 Answer

Changed battery


if security system is on motor should turn over just not start check wires at starter for 12volts and make sure motor is not locked up

Jun 18, 2008 | 1991 Jeep Cherokee Briarwood

Not finding what you are looking for?
1991 Jeep Cherokee Briarwood Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...