Question about 1994 Toyota Camry

Open Question

Where is the windshield washer pump located on 1994 camry and does it have it's own fuse

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 958 Answers

SOURCE: Replace the windshield washer motor

first locate the washer tank, remove the bolts that are holding it. remove the wire to the motor, remove the hose that is attached to the motor, slowly pull the motor off the rubber gasket .

do the reverse in installing a new one.

tnx 4 using fixya,

drcool


Posted on Sep 01, 2008

  • 2039 Answers

SOURCE: windshield washer - fuse location

there no fuse for just the washer it has the wiper on that fuses if you press the washer and wiper start its not the fuse it a bad washer pump pierre

Posted on Oct 04, 2008

c17hydro
  • 2984 Answers

SOURCE: Where is the fuse box located on my 1994 Toyota

Fig. 5: Another fuse block is located in the drivers side knee bolster behind a coin box1994–96 models


ee598a7.jpg

Posted on Oct 02, 2009

snafu86
  • 193 Answers

SOURCE: location of windshield washer pump motor 1995

Should be attached to the bottle or very close to the bottom of it.

Posted on Dec 09, 2009

  • 37 Answers

SOURCE: Which fuse runs the windshield washer pump on 98 Toyota Corolla?

it could be powered thru a relay

Posted on Jun 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse located that controls the windshield washer pump


Hi Merlin
I THINK this is your fuse panel and location for the washer pump fuse. (See link below)

Hope this helps you out.
-Steve




2003 nissan altima fuse diagram Google Search

Apr 02, 2015 | 2003 Nissan Altima

1 Answer

How do i get to the washer pump on a 1994 toyota camry?


I don't think any Camrys that year had rain sensing wipers so you could be right. Anyway to get at the pump you have to unscrew fixings and lift up the washer reservoir to disconnect the wiring, then remove the reservoir.

Jun 15, 2017 | 1994 Toyota Camry

1 Answer

Windshield washer pump won't work


May need the washer pump replaced...check the "help wall" at your local parts store. A manual may be available at your nearby salvage yard...you can find this online too. Hope this helps.

Mar 21, 2014 | 1994 Hyundai Excel

2 Answers

Windshield wipers


Look for the fuse box under the dashboard, and look at the diagram on the cover for the proper location of the fuse, and use a plier (if you dont have fuse puller (small plastic one)), and gentle hold the fuse and pull it out carefully.

Mar 06, 2014 | 2006 Toyota Camry

1 Answer

Location of windshield washer pump


usaully located at the bottom of washer tank where you fill the window washer fluid some have fuses in the fuse box others the wires corrode or break at the pump or pump burnt

Jan 27, 2014 | 1996 Audi A6

1 Answer

1994 Toyota Camry XLE V6 Fuel Pump Switch Location


The pump gets power from the circuit opening relay and the EFI main relay, which are supplied through the EFI fuse. p219 here

http://www.turboninjas.com/camry/eg2.pdf

and

http://www.turboninjas.com/camry/be.pdf

May 04, 2012 | 1994 Toyota Camry

1 Answer

Mercury villager 1994 washer pump not working


the pump motor likely is bad. get a used washer fluid reservoir at a pick n pull yourself or at car-part.com. page with * is lowest cost.

Pump and Reservoir, Windshield Washer Removal
  1. Disconnect the battery ground cable (14301).
  2. Raise and support the vehicle.
  3. Remove the RH wheel (1007).
  4. Remove the RH front fender splash shield (16103). Refer to Section 01-02 for the removal procedure.
  5. Remove the windshield washer reservoir top bolt.

  6. Disconnect the windshield washer reservoir fluid level sensor electrical connector.
  7. Disconnect the rear window washer pump electrical connector from the rear window washer pump.
  8. Disconnect the windshield washer pump electrical connector from the windshield washer pump (17664).
  9. Place a suitable drain pan under the windshield washer reservoir (17618) and drain the washer fluid.
  10. NOTE: The rear window washer hose end is color-coded, matching the connector on the rear window washer pump. Match the colors to ensure proper installation.

    Disconnect the washer hoses from the windshield washer pump and the rear window washer pump on the windshield washer reservoir.

  11. Loosen the two windshield washer reservoir side bolts.
  12. Remove the windshield washer reservoir by sliding it out of the side slots.
  13. Remove the windshield washer pump.

    Installation
To install, reverse the removal procedure. Tighten the lug nuts (1012) to 98-118 Nm (72-87 lb-ft).

Sep 09, 2009 | 1994 Mercury Villager

2 Answers

Washer doesn't work and I can't hear the pupmp motor working.


The windshield washer pump is part of the windshield wash reservior.
There is an electrical connector located on the bottom of the reservior.
That is the pump .
If the pump is not in the reservior. I would just trace the washer fluid lines from the sprayer on the vehicle back to the pump. The lines just might lead back to the reservior for the windshield wash solution. Then you will have confirmed the pump is in the reservior.

You may have to get a new reservior. The pump might not be seperate item, I am not 100% sure on that.

I also would double check the fuses and any relays related to the washer pump.

Finally, I would check the washer switch if you replace the pump and still is not working .

Good luck

Mar 31, 2009 | 2002 Chrysler Town & Country

2 Answers

Rear window washer works, front windshield washer does not.


Yes their are two seperate pumps. The pum is located in the driver wheel well.

Check fuses then check the pumps. Make sure you are getting voltage to both pumps.

Nov 29, 2008 | 1994 Acura Integra

1 Answer

Replace the windshield washer motor


first locate the washer tank, remove the bolts that are holding it. remove the wire to the motor, remove the hose that is attached to the motor, slowly pull the motor off the rubber gasket .

do the reverse in installing a new one.

tnx 4 using fixya,

drcool


Aug 07, 2008 | 1997 Toyota Camry

Not finding what you are looking for?
1994 Toyota Camry Logo

Related Topics:

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...