Question about 1991 Geo Tracker

1 Answer

Brake pedal goes to the floor but pumps up to a solid pedal after 3 or 4 pumps. brakes are good and adjusted and master was replaced. Any help here??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

Still have air in the system some wear. try re bleeding the master cylinder....GOOD LUCK

Posted on Nov 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake pedal went to the floor, brought it in...They told me it was the Master Cylinder. They changed it and put in a brand new master cylinder but it still seems like the brake pedal goes further t


The extra brake travel can be;
1. air still in the brake lines and need bleeding
2. if there are brake drums on the rear they may be out of adjustment
3. if there are warped brake disc or caliper problems that will add to the brake travel

Dec 08, 2012 | 2002 Chevrolet Tracker

1 Answer

I replaced disc brake pads, rear shoes. wheel cylinder,master cylinder, power brake booster all new. Question: My brake pedal is not solid,goes low to the floor almost. I have bled the master cylinder 1st,...


Check your lines going to the brakes the rubber hose on the 1993 chevy have a tendancy to crack and brake are you using an excess of brake fluid

Sep 12, 2011 | 1993 Chevrolet C1500

1 Answer

Brake pedal goes to floor on first depression; then pumps up fine


Try this,apply the emergency before stepping on the brake.
If this helps the pedal,the rear brakes are out of adjustment.

Jul 01, 2010 | 2000 Saturn L-Series

1 Answer

89 c1500, full pedal on brakes until started then goes to floor. Bled system,replaced master cylinder and anti-lock system,now has better pedal but code 4 on brake lite that won't go out. Have replaced...


adjust your rear shoes up so that the rear drums just turn, with them ajusted to a low setting the brake pedal will be low .
also when you start your engine it is noral for the pedal to drop because of the boster ! [ but not to the floor ]
Bruce Pike

Oct 10, 2009 | 1989 Chevrolet C1500

2 Answers

I have a 92 chrsy. 5th ave with no antilock brakes. just base brakes with rear drums. replaced master cly. due to leaking and replaced all the brake lines and hoses. i have good streams of fluid from all 4...


When you bleed the brakes are you starting with brake furthest from the master cylinder? Also was the master cylinder bench bled? If everything there is okay and you are not getting any air in fluid stream, you could try bleeding the brakes by having some one slowly pump the pedal till it is firm. Then have them let off open first bleeder valve and slowly depress to floor and hold there untol the valve is closed. repeat this at all bleeders. You may want to have car running to do this. Try this and let me know.

Jul 02, 2009 | Chrysler New Yorker Cars & Trucks

2 Answers

1973 F250 TRUCK 4X4 BRAKE PEDAL GOING TO THE FLOOR


Master is internally bypassing : replace or rebuild.

Feb 20, 2009 | 1989 Chevrolet K1500

2 Answers

97 ford e350 brake pedal goes to the floor...


are your rear drums set up? why did you bleed the brakes. when only when you installed new pads?

Sep 11, 2008 | 2002 Ford E350

Not finding what you are looking for?
1991 Geo Tracker Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...