Question about 2000 Buick LeSabre

Open Question

How to locate/replace ignition module 2000 Buick LeSabre?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: 2000 Buick LeSabre ingintion coil and module

The coil is on top of the engine and the module on the firewall or suspension strut tower

Posted on Nov 06, 2008

Ad
ButtFuzz
  • 463 Answers

SOURCE: PCV location on a 2000 buick lesabre

Open hood, top left side between the valve covers. There is a "funky" plastic housing that turns counter-clockwise (less than 1 inch of travel). then pull straight up to reveal the "missing" pcv valve.

Posted on Mar 05, 2009

daves944
  • 1050 Answers

SOURCE: 1998 BUICK LESABRE CUTS OFF WHILE DRIVING

The problem is the crankshaft sensor for sure. It is mounted behind the crankshaft pulley which is pretty difficult to get off as you need a special puller. A shop should charge about 1.5 hours for this job. It is a very common problem.

Posted on Apr 05, 2009

  • 1 Answer

SOURCE: need instructions for replacing 94 Buick LeSabre window module.

2002 BUICK LESABRE REAR DRIVER SIDE DOOR POWER WINDOW UP CABLE IS OFF TRACK WINDOW WILL NOT STAY UP HOW CAN I REPAIR THAT

Posted on Aug 02, 2009

honeymokey
  • 3113 Answers

SOURCE: i have replaced coil pack

You probably need a crank sensor.

Posted on Oct 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of the blower motor resistor control module for a 2000 buick lesabre. i would really appreciate your help thanks mike


Doesn't have resistor , has blower motor control module .
Blower Control Module
Under the right side of the instrument panel, right of the blower motor
Search from over 10 Million Auto Parts

Jan 17, 2017 | 2000 Buick LeSabre

1 Answer

Where is the Body Control Module (BCM) on a 2000 buick lesabre


It's not the BCM. The BCM doesn't affect the ignition switch power. But the ignition switch will affect the BCM. I would look to see why you don't have power to the ignition switch first. Fuse or wire.

Jul 23, 2015 | 2000 Buick LeSabre Limited

1 Answer

How to install a ignition module buick lesabre V6 3800


1A Auto shows you how to remove, install, repair, or replace your broken misfiring or damaged ignition coil. This video is applicable to Buick LeSabre 2000-2005.

Nov 03, 2012 | 2001 Buick LeSabre

1 Answer

2000 BUICK LESABRE SOMETIME TRYING TO START THE ENGINE TURN KEY WILL NOT TURNOVER,HOLD KEY IN START POSITION FOR 10-15 SEC CAR WILL START THIS HAPPEN 1 OUT 15 TIME.


Is your SECURITY light flashing when this happens? If it is, then you most likely need to replace your ignition tumbler. Otherwise the only advice I have is to scan your engine computer and body control module to see if there are any fault codes.

Aug 19, 2011 | 2000 Buick LeSabre

2 Answers

Where is the ignition control module located on a 1990 buick lesabre


For 1990 Buick Lesabre 3.8L FI OHV 6cyl the Control Module-Ignition is located: Under hood, passenger side, front engine area, mounted on upper passenger side of cylinder head under ignition coil.

Hope helps (remember to rate this answer).

Apr 11, 2011 | 1990 Buick LeSabre

1 Answer

My 2000 buick lesabre runs for 2 min and stopt


CHECK FUEL PRESSURE SOON AS ENGINE SHUT OFF.HOOK UP FUEL PRESSURE GAUGE SEE IF YOU HAVE FUEL PRESSURE.DO THIS WITH IGNITION OFF.IF FUEL PRESSURE 0 THEN YOU KNOW FUEL PUMP FAULTY.IF YOU HAVE 41 - 47 PSI. YOU HAVE IGNITION ELECTRICAL PROBLEM.COULD BE IGNITION MODULE.CODE SCAN CAR FIRST BEFORE BUYING NEW PARTS.

Feb 13, 2011 | 2000 Buick LeSabre

1 Answer

2000 Buick LeSabre Will not start Replaced cam


Multiple engine misfire is related to the coils and the ignition control module. I have a 2002 with the 3.8 engine. It has three coils. I just went through this problem. I bought one coil and tried it in each position with no improvement. It was the ignition control module. Mine is located under the three coils. A relatively easy item to replace. Cost about $140.

Apr 18, 2010 | 2000 Buick LeSabre

1 Answer

My car keeps dieing while driving, i think it might be the electronic module. Where would the module be located at?


The ignition module is located under the ignition coils.This is where the plug wires go on to.You should check for codes.Even if the check engine light did not go on there could still be some codes.Hope this helps.Good luck.

Apr 07, 2010 | 2000 Buick LeSabre

1 Answer

2000 Buick LeSabre ingintion coil and module


The coil is on top of the engine and the module on the firewall or suspension strut tower

Jul 30, 2008 | 2000 Buick LeSabre

1 Answer

Igniton module for 1994 buick lesabre


Obviously that the ignition you bought is broken or not fit with your car.

Jun 30, 2008 | 1994 Buick LeSabre

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...