Question about 1998 Toyota Corolla

1 Answer

No power at the washer motor plug. - 1998 Toyota Corolla

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Well see if there is a fuse or relay, if not that then your switch is bad and that may well be in a stem on the multi-function switch under the steering wheel. Get a service manual on CD for a few bucks on ebay if you cannot find the fuse panel and it is not in your owners manual

Posted on Nov 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Windshield washer stopped working dose it have fuses


usually, the washer circuit is part of the wiper circuit, so no separate fuse for the washer. Best thing you can do is pull connector off at the washer pump, and see if that wire has power on it when the washer button or switch is held in the on position. If it has power, then probably the washer pump motor has failed.

Dec 05, 2016 | Cars & Trucks

1 Answer

01 chevy monte carlo just replace window washer motor and still nothing check for power and that is good plug it it and tested and it was only .6 volts it grounded out


Use a voltmeter and connect leads across the plug. Press the washer function and monitor voltage. It should be battery voltage. If voltage is low, suspect resistance in washer circuit

Feb 28, 2016 | Cars & Trucks

1 Answer

Why doesn't wiper washer work?


Most likely your washer motor failed or its not getting power, ground. Diconnect plug for motor and probe wires. One terminal should have ground and the other battery voltage 12.7 volts or higher when sprayer switch is deppressed.

Feb 06, 2016 | Cars & Trucks

2 Answers

Washer fluid not spraying


the tube might be disonnected from the fluid tank.

Feb 18, 2015 | 2008 Ford Edge

1 Answer

My windshield washer doesn't work


Have you checked the fuse? Sounds like a blown fuse or you have a short in a wire maybe in the plug to the washer motor is worn, rusty, or the wires broken.

Aug 31, 2014 | 2000 Chrysler Cirrus

1 Answer

'07 Honda Fit - what is the fuse number for the washer fluid motor?


NO fuse for the washer motor, check if the motor is plugged in and if there is power when you push for water.

Dec 03, 2013 | 2007 BMW 750Li Sedan

2 Answers

MY WIND SHIELD FLUSH WATER IS NOT WORKING, WHAT SHOULD I DO?


check that hoses have not come off or are being pinched when closing your hood

if living in below freezing temp. make sure using all season fluid, check for clog via sediment also in hose or in the outlet/port itself.

Feb 21, 2011 | 2003 Dodge Caravan

1 Answer

Front windshield washer motor is not working, but the rear one is. what could be the problem? have checked the fuse and that is ok. what can i do to fix the problem?


use a cheap probe type 12V tester and check the output at the plug on the washer pump motor when the wash button is pushed. If you have power to the plug then the washer pump motor is bad or poor electrical connection. If no power to the plug then the multifunction switch may be bad. either way about $50 in parts from rockauto.com

Sep 02, 2010 | 2001 Chrysler Town & Country

1 Answer

Washer pump won't stop


Disconnect the motor and Connect A Test light to POS Terminal @ Motor Plug If Still Power there Wiper Switch is Bad, If NO POWER there The Washer Motor is STUCK so Replace it.
Hope this Helps

Jul 12, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Windsheild washer not working in toyota avalon 02


Looks like the washer motor has failed. Remove the lower plactic trim under the washer bottle & check to see if the connector is plugged in to the motor. Also check to see if there is power to the motor with the switch depressed. If you have power, you need a washer motor. Common failure if the washer fluid freezes once. Ice gets inside the motor & expands, breaking the internal housing and ruins the motor.

Aug 07, 2008 | 2002 Toyota Avalon

Not finding what you are looking for?
1998 Toyota Corolla Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...