Question about 1999 Oldsmobile Alero

1 Answer

How do i replace the cruise control on/off switch on my 1999 alero

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,036 Answers

TO REMOVE CRUISE CONTROL SWITCH. FIRST TURN OFF RADIO TO KEEP FROM LOSING CODE. DISARM AIRBAG IN THE STEERING WHEEL BY REMOVING NEGATIVE BATTERY CABLE WAIT 20 MINUTES FOR AIRBAG TO DISCHARGE BEFORE REMOVING AIRBAG AND HORN PAD IN STEERING WHEEL.ONCE AIRBAG IN STEERING WHEEL OUT.YOU CAN REMOVE THE CRUISE CONTROL SWITCH.BECAREFUL REMOVING AIRBAG IN STEERING WHEEL CARRY IT AWAY FROM BODY WITH AIRBAG HORN PAD POINTING UP.IF YOU DROP IT.DONT PUT IN BACK IN STEERING COULD DEPLOY ON INSTALLATION.

Posted on Nov 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I troubleshoot the cruise control of a 2003 Alero?


It's probably a problem with cruise control module , located under the hood in engine compartment . Or a bad connection somewhere . Do you know how to do electrical testing ? Is the air bag light lit on the instrument cluster ?

Could have DTC'S - diagnostic trouble code's stored .
DTC P1554
The powertrain control module (PCM) inhibits cruise control operation when certain conditions are not appropriate for cruise control operation. The PCM removes the ground from the cruise control inhibit signal circuit in order to disengage cruise control operation.
DTC P1585
Output driver modules (ODMs) are used by the powertrain control module (PCM) in order to turn on many of the current driven devices that are needed to control various engine and transaxle functions. DTC P1558 set indicates that an improper voltage level has been detected on the signal circuit which controls the cruise control inhibit circuit.
Action Taken When the DTC Sets
• The PCM will not illuminate the malfunction indicator lamp (MIL).
• The PCM will store the conditions present when the DTC set as Failure Records data only.

Cruise control is a speed control system that maintains a desired vehicle speed under normal driving conditions. However, steep grades may cause variations in the selected speeds. The electronic cruise control system has the capability to CRUISE, COAST, RESUME SPEED, ACCELERATE, and TAP-UP or TAP-DOWN.
The main parts of the cruise control system are:
• The cruise control module assembly
• The function control switches
• The cruise control release switch
• The clutch pedal position switch (CPP), if equipped
• The stop lamp switch assembly
• The vehicle speed sensor
The cruise control system uses the cruise control module assembly to maintain the desired vehicle cruise speed and operation. The cruise control module assembly has an electronic controller and an electric stepper motor to vary the throttle in each different cruise control mode. The electric controller monitors vehicle speed and operates the electric stepper motor. The stepper motor operates in response to the electronic controller, to maintain the desired cruise speed. The electric stepper motor moves a strap that is attached to the cruise control cable which moves the throttle linkage. The cruise control module assembly contains a low speed limit which will prevent system engagement below a minimum speed of 40 km/h (25 mph). The module assembly is not serviceable.

Dec 11, 2016 | 2003 Oldsmobile Alero

1 Answer

Issues with turn signal in my 2001 Oldsmobile Alero. Hazard lights and right/left turn signal emit a very loud buzzing, then gets stuck. It does not work most of the time, or when it does, it buzzes...


Sounds like you have a bad multi-function switch or signal switch they are the same thing.This will fix the cruise control but,your other problem is your hazard warning switch replace it to.This will fix both of your problems.P.S you can get both of these from www.rockauto.com for less than $60.00.

Apr 20, 2011 | 2001 Oldsmobile Alero

1 Answer

The cruise control on my 2000 Alero doesn't work. What are the possible problems? Is there a fuse for this?


Yes, there is a fuse. Could be the vehicle speed sensor, could be a bad wheel bearing, could be cruise control switch, could be transmission control module, could be brake light switch.

Mar 15, 2011 | 2000 Oldsmobile Alero

1 Answer

How to remove fan switch on 1999 oldsmobile alero or replace switch


FIRST OF ALL YOU NEED TO DISABLE AIR BAGS.TURN OFF RADIO FIRST SO YOU WONT LOSE RADIO PLAYING CODE.DISCONNECT NEGATIVE BATTERY CABLE. WAIT 15 TO 20 MINUTES UNTIL AIR BAGS DISCHARGE.TO REMOVE HEATER AND AC CONTROL SWITCH.YOU NEED A FLAT TRIM TOOL USE TO PRY UP TRIM AROUND CONTROL SWITCH.SO YOU CAN REMOVE CONTROL SWITCH SCREWS AND REMOVE CONTROL SWITCH.

Feb 26, 2010 | 1999 Oldsmobile Alero

2 Answers

I need to repace the cruise control switch how do I get the horn cover off


1. Remove the lower steering column cover.
2. Remove the AIR BAG bolts from the back side of the steering wheel with a T-30 socket. Install the bolts back in the air bag for reassembly. The AIR BAG will snap into place when pushed down on carefully.
3. Remove 2 screws on the bottom of the steering wheel cover. The wires need to slide out so the switch can be removed.
4. Remove the cruise control switches.

The AIR BAG does not have to be disconnected to remove the switches, just don't let it flop around or stretch the wires.

Dec 25, 2009 | 2000 Oldsmobile Alero

2 Answers

1999 oldsmobile alero the traction and cruise not working


use a scanner to check the abs system . most of the time the abs brakes and traction control system work together. your cruise control . unit has a servo motor .in front right fender well. check the fuse and relay also the cruise control brake release switch. and the brake light switch.if all is good you have a cruise control module problems. dealer ship job.

Mar 31, 2009 | 1999 Oldsmobile Alero

3 Answers

Cruise control switch won't work on a 2003 Alero


if it worked before i would chk. the fuse, there will be one for it, but if its blowen something made it do it. i would replace it, and if it blows again, you will have to find the cause, could be switch.

Jan 27, 2009 | 2003 Oldsmobile Alero

Not finding what you are looking for?
1999 Oldsmobile Alero Logo

1,024 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...