Question about 2004 Jeep Liberty

4 Answers

Jeep Liberty 2004 error code P0144

I've been getting the code P0144 periodically for about 4-5 months. Seems to go off after I re-seat the gas cap (bought new one too), but comes back on a few weeks later.....stays on for a week or 2 then goes off. I got the code from a Scan Gauge device that plugs into the computer port. 106,000 miles. Runs fine..... what could be the cause ?

Posted by on

  • rnolan110 Jun 18, 2008

    Yes very !!!!!!!
    The faulty fuel possibility ocured to me too !

  • rnolan110 Jun 18, 2008

    So far I've received 5 solutions from 5 different techs, but I can only view the first one. ALL links in the other emails point to it rather than the other solutions.....so what's THIS solution ??

×

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 638 Answers

The problem that you are having is with the TPS Throttle position sensor. It is located on the side of the throttle body. follow the air breather box to the intake, you will see the throttle linkage the connector on the other side is the sensor.

rate the solution as fixya.

Posted on Jun 18, 2008

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

Please CLICK HERE for the user manual.P0144 error means Oxygen sensor input voltage maintained above normal operating range.

Please don't forget to rate the solution.

Goodluck..

Posted on Jun 18, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

P0144 (M) 1/2 O2 Sensor Shorted To Voltage Oxygen sensor input voltage maintained above normal operating range.there you go

Posted on Jun 18, 2008

  • Lee A.
    Lee A. Jun 18, 2008

    Take it to your local jeep dealer they will take care of you.
    Lee


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,036 Answers

Code is "Oxygen sensor input voltage maintained above normal operating range"

Very likely it's the Lambda sensor on the eshaust playing up. Check connections and get it tested.

Can give up with faulty fuel from some pumps.

Posted on Jun 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 jeep liberty front seat removal


left or right?
battery neg lug off.
all connectors under seat ,unplugged
then the 4 bolts out
KJ jeep SM serv, man.covers this.
chapter 23 page 78

cut > paste


seat-x4dybgm1xaxinyj1r3jreevk-4-0.jpg

Feb 20, 2017 | 2004 Jeep Liberty

1 Answer

Front seat removal 2004 jeep liberty


4 bolts.
look first see em,' you will of you look
if wanting to know before looking
there is this magic book, called SM
that does this step by step,
see KJ jeep and read.
http://jeepdied.com/books.html

Feb 20, 2017 | 2004 Jeep Liberty

1 Answer

Luz marcada con el numero cinco?


2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


Dec 08, 2015 | 2005 Jeep Liberty

1 Answer

2001jeep cherokee check engine


Someone would need to clear the trouble codes with a scanner or code reader. If the problem is fixed, the light should stay off.
If the code comes back, you may have a leak somewhere else in the venting system.

Jun 27, 2013 | Cars & Trucks

1 Answer

I had blinking vsc code and check engin light on. Took it to a dealer who ran diagnotic. Dealer said gas cap has failed and new charcoal canister is needed. Since the high cost of latter, I simply...


Don't worry about that light, if performance and fuel economy is good. The light is still a fault from the evaporative canister.. It should not affect performance. Just make sure the fuel cap is snug. Just perform The ODBII scan periodically to catch any future problems. The vacume diaphragm for canister purge should be unplugged and the vacume hose plugged. This will avoid engine from sucking fuel into the engine due to a ruptured diaphragm in the canister

May 19, 2017 | 2009 Toyota Corolla

1 Answer

Burping noise from gas cap, and fuel irregularity once below 1/4 tank


theres two plugs on the fuel pump. one is for pump and one is for gauge if you take pump out of tank and put a volt meter on the two outer prongs in plug then the two inner two of them will read the same when yoou move the level up and down and when you put meter on other two it will change when you move level or the level part of pump isnt working correctly. my old tahoe did that and when it would get to a 1/4 of a tank i knew it was almost out of gas.

Mar 01, 2013 | Cars & Trucks

1 Answer

2007 Lacrosse gas caplight on


Have to smoke test the Evap System & Diagnose it

Gas Cap Light doesn't mean the cap is bad,
have to get the codes & use them

Feb 12, 2013 | 2007 Buick LaCrosse CXL Sedan

1 Answer

2004 JEEP LIBERTY ERROR CODE 2314


call me any time between 8 and 4 at this #951 662 0247 ill tell you what it means and what to do ok

Nov 13, 2012 | 2004 Jeep Liberty

Not finding what you are looking for?
2004 Jeep Liberty Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...