Question about 1997 Acura CL

1 Answer

I have a 1998 Acura CL. Just changed the brake pads all the way around. Also had the brakes bled afterward. Brake pedal goes to the floor without thorough braking during stops.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 398 Answers

You need to bleed them first and if you get the same results you have a bad master cylinder.Good Luck!!!

Posted on Nov 14, 2010

  • 1 more comment 
  • Jeff Holder
    Jeff Holder Nov 14, 2010

    Thanks. We'll bleed the brakes again. If the brakes were working perfect before, what is the likelihood the master cylinder could go bad just changing the pads?

  • Roosevelt James Nov 14, 2010

    Did the master cylinder run out of brake fluid? If so the master cylinder needs to be bleed also. make sure it is full of fluid. Good Luck!!!

  • Jeff Holder
    Jeff Holder Nov 14, 2010

    That might be it. I didn't check the master cylinder fluid level after making the replacements. But I will bleed both items next. Thanks!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 ford taurus brake pedal goes straight to the floor .


Brake line busted somewhere? Is the linkage to the master cylinder intact? Master cylinder might have been installed incorrectly.

Dec 04, 2013 | Cars & Trucks

1 Answer

I have no brakes


It can be issue with master cylinder or the problem is there is still some air there in the system that has to be bleed. Or else the parts replaced are not aligned properly/.I suggest everything back.


There are few help links mentioned below to troubleshoot the issue.


Click the link below and follow its procedure: -----


All types of brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------

Brake Fade Issue?

http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------

Brake System Troubleshooting?

http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------

Car Brake lines have no pressure?

http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------

Car Brakes Dragging?

http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

-------------

Car Brakes grabbing?

http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

-----------

Car Brakes Making Noise?

http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

-------------

Car Brakes Pulling?

http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

----------

Pulsating Brake Pedal?

http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

---------

Spongy brake pedal?

http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

----------

Hard Brake Pedal?

http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------

Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

-------------

Feels Like Brake pedal Pulsating

http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

-------------

What is Brake Drum Bar?

http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------

ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

-----------

Vibrations while braking On Chevrolet Van?

http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

-----------

Dragging brakes?

http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------

Brake pedal stuck?

http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

-----------

After replacing brake rotors and pads, brake pedal remains on floor?

http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

----------

How to replace Brake Power Booster?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

-----------

1997 Chevy Tahoe Brake lights not working?

http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------

How to service Drum brakes?

http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

-----------

What type of problems usually noticed on Drum brakes?

http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

----------

How to test Drum Brakes?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

---------

Brake Bleeder Screw Function?

http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

---------

Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html

----------

Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

-------------

Brake pedal is pulsating and vibrating?

http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------

2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------

These details will help.

Thanks.

Dec 09, 2012 | Cars & Trucks

1 Answer

Brake pedal goes to floor on first depression; then pumps up fine


Try this,apply the emergency before stepping on the brake.
If this helps the pedal,the rear brakes are out of adjustment.

Jul 01, 2010 | 2000 Saturn L-Series

5 Answers

Brake pedal goes to the floor only when engine is running. Pedal is perfect with engine off.


your power brake booster is blown out
the seal has a leak in it
run the truck for 3 minutes and shut it off. with the windows up listen carefully while you gently apply the brakes
listen for a hissing sound of air leaking.
the sound of these leaking is a very soft sound

Mar 27, 2010 | 1998 Chevrolet K1500

2 Answers

Brake pedal goes down to far abs brakes


Hi I'm litoshop if you bled the system and get no results then your brake pump needs to be replaced now before replacing make sure your pads are installed correctly because if there not this to can cause this problem good luck. if this information has been useful please let us know thank you.

Aug 11, 2009 | 1998 GMC Sierra

1 Answer

How do i properly bleed out my Jimmy?


I use a vacuum bleeder (abt $35) starting at the furthest brake line from the master cylinder & working my way back to the closest. If bled properly by keeping the maste cylinder full, this should solve your problem. Rick

Apr 15, 2009 | 1998 GMC Jimmy

1 Answer

2006Vito.Bled all callipers now pedal drops underfoot


hi,replacing all brake pad are not required to bleed the brake system,brake pad goes in flooring because the system have air,abs system is out,try to bleed the system again,if not bring to your dealer,they have a bleeding machine,ty

Mar 22, 2009 | Mercedes-Benz CLK Cars & Trucks

2 Answers

Soft brake pedal after rotor replacement


If they rebled the brakes and the pedal goes to the floor, chances are that the master cylinder is bad. Probably cost about $80-100 for the part if you could do it yourself

Nov 30, 2008 | 2003 Acura 3.2CL

Not finding what you are looking for?
1997 Acura CL Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...