Question about 1993 Ford F250

1 Answer

How do I change heater core on 93 Ford F250 5,8 motor?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Inside the truck open the glovebox passenger side dash...pop up the hinges then almost close it and rise it up and take it out..then unscrew the abs computer pull it out the way ..then unscrew the core cover box first pop the temp cable out....then go under the hood and remove the two water hoses move clamps back....after this is done go inside pull core out. 30 dollars at local part store..

Posted on Dec 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater does not work on 1999 ford taurus


heater motor? and/or no heat inside of car?...

Dec 18, 2013 | 1993 Ford Taurus

1 Answer

Only cold air coming out of vents. Changed thermostat and heater core. Truck is a 1989 f350 7.3 diesel. Heater hoses are hot and heater core compartment is warm.


you may have to flush out the motor and raidiator. check to seeif your water is not rusty if so that means you need to flush the motor . some times maylead to clogged water jackets in the motor.

Dec 17, 2010 | Ford F-350 Cars & Trucks

1 Answer

93 ford ranger blowing cold air only on heater setting. where do I begin troubleshooting, also I read about the heater treater blend door. Is this a high probability as my problem?


Check if the blend door is working, do you hear any operation or change when temperature setting is changed? If not, possible blend door problem. Or do it is that you have heat at the floor and not on your face, it could be a mode door problem. If neitherr, then check thermostat? Hold hoses to and from, should be firm. Heater core itself can be plugged on these models. You can check the temperature of the inlet and outlet hoses at the firewall with an infared temperature gun. They should be equal. If drastic difference, core is plugged. Backflush the heater core if this is the issue. If improves and returns, new heater core will be required.

Nov 29, 2010 | Ford Ranger Cars & Trucks

1 Answer

93 mustang lx2.3 losing power and keeps blowing heater core hose is heater core clogging causing this


you have a blown head gasket. its over pressurizing the cooling system and blowing the hose.

Mar 02, 2010 | 1993 Ford Mustang

2 Answers

NEED TO REMOVE HEATER CORE ON A 93 FORD TUARUS GL TRYING TO FIND OUT HOW TO ACCESS THE HEATER CORE IN DETAIL SO I CAN REPLACE IT


you have to remove the dash. i suggest you go to an auto parts store and buy an after market tech manual. by the way everything under that smooth dash is sharp and give yourself a good weekend to complete. GOOD LUCK.

Nov 28, 2009 | 1993 Ford Taurus

1 Answer

1984 Jeep CJ7 heater core leaking. '93 inline 6 motor. Wrangler dash. How to I remove the core?


  1. Disconnect battery ground cable and drain cooling system.
  2. Disconnect heater core hoses.
  3. Disconnect damper door control cables.
  4. Disconnect blower motor electrical connector.
  5. Disconnect water drain hose and defroster hose.
  6. Remove nuts retaining heater housing assembly to instrument panel. Remove heater housing assembly by tilting heater downward to disengage it from air inlet duct and pulling toward rear of vehicle.
  7. Remove heater core from heater housing.
  8. Reverse procedure to install.

Nov 17, 2009 | 1984 Jeep CJ7

3 Answers

Need to know where heater core is for 93 ford aerostar


Working in the passenger compartment, remove the six screws attaching the heater core access cover to the plenum assembly. Remove the access cover.

57a32ac.gif
Heater core and case

Depress the retainer bracket at the top of the heater core and pull the heater core rearward and down, removing it from the plenum assembly.

Nov 13, 2009 | 1993 Ford Aerostar Extended

3 Answers

1999 ford taurus no heat change thermostat checked hoses flushed heater core and radiator


Is the blower motor working? If not that is what it is. If it is working then check heater coil out, Could be bad heater coil.

Nov 10, 2009 | 1996 Ford Taurus

1 Answer

Cant get heat in the cab


Make sure that you have 2 heater hoses going into the dash. These are 5/8" hoses coming from the water pump and going into the top of the engine. The 2 hoses go through the firewall into the heater core. If you don't have the 2 hoses going to the heater core, the previous owner may have it routing itself back to the engine. It the hoses are routed back to the engine, there's a chance of the heater core being bad as well and this is why it's by-passed.

Nov 09, 2008 | 1993 Ford Econoline

Not finding what you are looking for?
1993 Ford F250 Logo

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...