Question about 2003 Chevrolet Tahoe

1 Answer

My passenger side window is not working. I believe it is out of the track connected to the motor. I need to remove the inside panel to get to the motor. What do I have to do to remove it? Thanks!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Remove the small screew for the handal panel the rest is just ****

Posted on Nov 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

2007 jeep patriot passenger window won't go up is there fuses anywhere other than relay


This Problem I believed not from fuses, Please check window operating Motor cable it might be broken or motor is not working it is available inside the door.

Nov 06, 2017 | Jeep Cars & Trucks

1 Answer

How do you remove and replace a power passenger right side back window in my 94 crown Victoria


Remove inside door handle then the panel. Inside the door you'll see the window tracks and motor. Remove the window from the motor bracket and slide it out. May have to remove a clip or two. Slide new window back in the track and secure it to the motor bracket.

Mar 11, 2015 | Cars & Trucks

3 Answers

I have a 2002 Oldsmobile Bravada...Yesterday all of a sudden my passenger's side window stop working(up and down)...the power lock and the heated seat all stop working on my passenger's side...?


If you have an Owners manual, try looking for a fuse panel diagram. Your could have a bad connection inside the doorpanel which shorted the fuse. The seat drive motor must be wired to a separate circuit coming from the floorboard and its okay.
The circuits are wired independently to protect the lighter wires from the heavy drain of the seat motor. If you had the heated seat function working on the seat at the same time as adjusting the seat motor it would be too much for a single circuit, so they gave you two circuits.

If you are going to work on the door panel, disconnct the NEG battery cable so you won't short out something taking it apart.

Another Repair place you might try is a Glass Replacement shop. They install the inner workings of window tracks daily and remove the door panels to do it. They would be able to find your wires, test your window motor, and get you on your way quickly.

Unlike a Dealership, they have a high turnover of glass installations daily. Some even come to your house to repair your problem. Your car would be repaired more quickly with these services.

Nov 22, 2011 | 2002 Oldsmobile Bravada

1 Answer

The driver and passenger side windows are either off the track or the motor is defected.


You will need to remove the door panels and take a look inside to see if the window regulator is broken, the most common reason for a glass to be off track is the regulator and aslo window not moving, once inside you will see and can test for power at the motor too see if the motor is bad.

Jan 08, 2011 | 2003 Mitsubishi Galant

1 Answer

Replace window motor on 1997 del sol


Remove the door handle with one #2 phillips screw, push forward. Push the 2 plasic clips on the release handle and the lock rod by rotating them away from the open end of the clip (clockwise for drivers side, counterclockwise for passenger side). Pull the lock rod and relese out of the clips. Remove the phillips screw in the bottom of the door grab handle. Remove the small black plastic piece on the upper forward corner of the door panel. Remove door panel, should be aproximately 10-12 clips. Once off, you'll see the window motor. Remove the outer window trim. Yes, you WILL break all the clips. I've not had much sucess no matter how careful I am. Use a 10mm wrench or socket to remove the window from the window regulator. You'll see 2 white plastic wedges with 10mm head bolts in them. Pull the window out of the track. If needed, loosen or remove the rear guide track. There also are two 10mm bolts holding the guide rail in. Remove the windoe regulator and motor assembly with (I believe) 3 10mm bolts. Once on the bench, remove the motor from the regulator and reinstall!

Dec 08, 2009 | 1997 Honda Civic del Sol

2 Answers

Passenger side power window does not go down


I would start by locating the fuse for the power windows, if one side is working move to step 2. I have replaced window regulators on several american vehicles, the honda should be no different. Youcan order the power window regulator online on autopartswarehouse.com, or take a chance at your local junkyard. you will need to remove the door panel, start at the release mechanism inside, usually 1 screw with a small plastic cover. in addition, 1 screw in the grab area of the arm rest, also covered. at the bottom of the panel under the arm rest start to pry off the door panel, you can take it off with a flat blade screwdriver or flat pry bar. it will make a snapping sound. then proceed, there are about about 8-10 total clips. after this is done, you will need to un hook the power window and door lock connections. next remove the door light connection at the bottom of the door. remove the plastic lining as careful as possible. you will need to put this back on after you finish. usually there are three screws attached to the regulator and 4 screws, 2 on each side of the alignment tracks. in addition there are 2 screws holding the window to the brace that moves up and down. remove the window bolts first and remove the glass, then proceed with the rest of the bolts, then re assemble as you have taken apart. On the hondas I would say about 2-3 hours will be need for each window. Good Luck!!!

Sep 09, 2009 | 1996 Honda Civic

1 Answer

Right rear window is off the tracks. How do I remove the panel?


if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door

Aug 30, 2009 | 2001 Oldsmobile Aurora

1 Answer

Passenger side window


Pop off the red reflector on bottom. Remove screw that's there. Pry off inside part where power lock, window and mirror buttons are, starting away from inside handle. Slip this off the door handle, be careful with wires. Remove small gounding screw and then jst pull up and inside trim will come off. Assembly is reverse

May 27, 2009 | 1994 Ford Thunderbird

1 Answer

Passanger side windo replacement


YOUR WINDOW SHOULD SIT ON 3 TRACKS ONE BOTTOM AND ONE EACH SIDE ON THE DOOR WHERE THE CLOSING JAW IS SHOULD BE I BELIEVE A 10MM BOLT HEAD UNDO THIS BOLT THAT WILL LET THE SIDE TRACK OFF WINDOW AS FOR THE BOTTOM TRACK I BELIEVE THERES A NUT ONE EACH END UNDO THESE THAT SHOULD TAKE OFF BOTTOM TRACK PULL WINDOW OUT LEAVE TRACKS INSIDE DOOR REINSTALL NEW WINDOW HOPE THIS HELPS

Jun 30, 2008 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
2003 Chevrolet Tahoe Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...